1100 Aluminium plaat te koop: Grade, Groottes en kopersgids

Bekendstelling

1100 aluminum sheet is one of the most practical commercially pure aluminum plates you can buy: with a minimum 99.0% aluminum content and a small copper addition, it is slightly stronger than 1050/1060 while keeping excellent formability, weerstand teen korrosie, weldability and thermal conductivity.

It is the default sheet for chemical equipment, cookware and deep-drawn parts, hitteputte, signs and general fabrication that do not need high strength.

Offered factory-direct, 1100 sheet can be supplied in standard 4×8 ft and metric sizes or cut to your dimensions, with the temper and surface finish the product needs.

This guide covers the composition, eiendomme, sizes and weights, toepassings, vervaardiging, hoe dit vergelyk met 1050, 1060 en 3003, en hoe om te bestel.

Wat is 1100 Aluminiumplaat?

1100 is a non-heat-treatable 1xxx-series alloy strengthened only by cold work and softened by annealing. Sheet generally runs about 0.2–6 mm thick (thicker material is plate), supplied flat or cut to length. Sy kenmerkende voordele is:

• Uitstekende rekbaarheid vir buiging, stempel, spin en dieptekening, veral in die O humeur.
• Very good atmospheric and chemical corrosion resistance from the self-healing oxide film.
• Effens hoër sterkte as 1050/1060 thanks to a controlled 0.05–0.20% copper addition.
• High thermal and electrical conductivity, plus excellent weldability and easy machining.
• Lig (oor 2.71 g/cm³), rust-free and lower cost than alloyed grades; anodizes to a good film.
• The trade-off is modest strength; load-bearing or wear parts should use 3003, 5052 of 6061.

Chemiese samestelling en meganiese eienskappe

Die beheerde chemie (per ASTM B209 / GB/T 3190) keeps silicon plus iron and copper within tight limits so forming, welding and corrosion performance stay high:

Element	Al	En + Fe	Cu	Mn	Zn
1100	≥99,0	≤0,95	0.05–0,20	≤0,05	≤0,10

 

Mechanical properties change with temper, dus dieselfde 1100 plaat kan sag en dieptrekbaar of hard en styf verskaf word (typical Rm values):

Gemoed	Treksterkte (MPa)	Karakter
O (uitgegloei)	ongeveer. 75–110	Sagste; diep tekening, spin, maksimum vormbaarheid
H12 / H22	ongeveer. 95–125	Kwart-hard; lig vorm
H14 / H24	ongeveer. 110–150	Half hard; common general-purpose temper
H16 / H26	ongeveer. 135–170	Driekwart-hard; stywer panele
H18	ongeveer. 150–200	Volhard; rigied, beperkte vorming

 

Waardes verskil effens met dikte en standaard; confirm tensile and yield on the mill certificate for your gauge.

The small copper addition is what distinguishes 1100 in service.

It gives a modest but useful gain in strength without sacrificing the pure-aluminum forming that lets the sheet be drawn into deep pots and liners, and the metal still anodizes into a uniform, protective film used on trim and nameplates.

1100 thus occupies a deliberate middle ground—not as soft and conductive as 1060, but not as alloyed as 3003, which is why it appears so often in cookware, chemical and general-purpose stock.

Standaard groottes, Oppervlaktes en gewig

1100 vel word vervaardig uit ongeveer 0.2 aan 6 mm (bord aan 200 mm+ op aanvraag), in breedtes tot ongeveer 2600 mm en lengtes na 12,000 mm. Common sizes include 4×8 ft (1219×2438), 1000×2000, 1220×2440, 1250×2500 and 1500×3000, plus custom blanks to drawing.

Oppervlakte / klaarmaak	Tipiese gebruik
Meul afwerking (optional PVC/PVDF protective film)	Algemene blad, vervaardigingsvoorraad, bekleding
Geborsel / spieël	Dekoratiewe panele, naamborde, beligting
Geanodiseer / kleur bedek	Chemical and outdoor panels, durable signage, snoei
Gebosseleer / circles	Isolasie, anti-slip, cookware discs and deep-drawn parts

 

Weight is easy at 2.71 g/cm³: kg per m² = dikte (mm) × 2.71; a 4×8 ft sheet covers about 2.972 m².

Dikte	kg/m²	Gewig per 4×8 vel
0.5 mm	1.36	ongeveer. 4.0 kg
1.0 mm	2.71	ongeveer. 8.1 kg
1.5 mm	4.07	ongeveer. 12.1 kg
2.0 mm	5.42	ongeveer. 16.1 kg
3.0 mm	8.13	ongeveer. 24.2 kg

Tipiese toepassings

• Chemiese proses toerusting, opgaartenks, vaartuie, pipes and fittings that need corrosion resistance and weldability.
• Kookware, cooking utensils and deep-drawn or spun parts, plus aluminum circles for pots and pans.
• Hitte sink, lampweerkaatsers, botteldop voorraad, printing plates and food packaging components.
• Tekens, nameplates and decorative or anodized architectural trim, and general stamped or bent parts.

Fabrication and Surface Treatment

1100 cuts, shears, bends and forms readily and can be laser, plasma or water-jet cut, gestempel, spun and drilled; it welds cleanly by common processes and takes anodizing, borsel, polishing and coating well.

Use O temper for the deepest draws and harder tempers where the finished part must hold shape; generous bend radii and clean, oil-free surfaces help on high-speed lines.

1100 vs 1050, 1060 en 3003

Graad	Min. Al / legering	Sterkte	Beste pas
1050	99.50% Al	Laag	Most economical general sheet and cladding
1060	99.60% Al	Laag	Best conductivity/reflectivity; signs and electrical parts
1100	99.00% Al, 'n bietjie Cu	Laag-medium	Effens sterker; vorming, sweiswerk, chemiese, kookware
3003	Al + Mn (oor 1.2%)	Medium	Oor 20% sterker; vloere, tread, tougher cladding

 

Kies 1100 when you need a little more strength and weldability than 1050/1060 with the same pure-aluminum forming and corrosion; stap tot 3003 for real added strength.

Gehaltebeheer, Pricing and How to Order

QC covers thickness and flatness, breedte/lengte en diagonale toleransie, surface quality and tensile/yield by temper and chemistry on the MTC; ISO 9001 mills support SGS/BV inspection.

Sheet is interleaved with protective film and packed on pallets or in cases with moisture-proof wrapping for export. Pryse volg die aluminium-staafbasis plus 'n verwerkingsfooi, with thinner/wider gauge, pasgemaakte sny, oppervlakbehandeling en klein hoeveelhede wat koste byvoeg;

compare per ton and per finished blank on identical specs under FOB/CFR/CIF (algemeen 30% deposito, balans teen die vragbrief). Om aan te haal, stuur allooi / humeur (1100), dikte, vel of leë afmetings, oppervlak, hoeveelheid, toepassing en bestemmingspoort.

Verify new material on production-gauge samples rather than photos: run the sheet through your forming, welding or cutting line at normal speed, meet dikte oor die breedte, inspect the surface and, for food or chemical use, confirm the compliance paperwork matches the lot.

A signed pre-production sample then becomes the receiving standard, and an integrated mill that rolls and finishes in-house will hold that standard more reliably across repeat orders than spot resellers.

Gereelde Vrae

V: Wat is 1100 aluminium plaat gebruik vir?

A: Chemical tanks, vessels and piping, cookware and deep-drawn parts, hitteputte, tekens, bottle cap and printing stock, and general fabrication needing formability and corrosion rather than high strength.

V: Hoe sterk is 1100 vergelyk met 1060 en 3003?

A: It is slightly stronger than 1050/1060 due to a small copper addition, maar 3003 (mangaan) is about 20% sterker; H18 1100 reaches roughly 150–200 MPa tensile.

V: Watter humeur moet ek kies?

A: O for deep drawing and spinning, H14/H24 for general sheet, H16/H26 for stiffer panels and H18 for the most rigid plate with little forming.

V: What sizes and thicknesses are available?

A: About 0.2–6 mm sheet in widths to roughly 2600 mm, insluitend 4×8 voet en metrieke standaarde, with plate and cut-to-size blanks on request.

V: Can it be welded, anodized and cut to size?

A: Yes—1100 welds cleanly, anodizes and finishes well, and can be laser or sawn cut, bent and supplied as custom blanks with protective film.

V: Hoeveel weeg 'n 4×8-vel?

A: Ongeveer 8.1 kg by 1 mm, 12.1 kg by 1.5 mm, 16.1 kg by 2 mm en 24.2 kg by 3 mm, gebruik kg/m² = dikte (mm) × 2.71 oor 2.972 m².

Afsluiting

1100 aluminum sheet is the slightly stronger, easy-to-fabricate pure-aluminum plate for chemical equipment, kookware, heat transfer and signs.

Spesifiseer die humeur van hoe die paneel verwerk word, maak dikte en snygrootte vas, choose the surface, en koop op meul sertifikate, toleransies en goedgekeurde monsters eerder as prys alleen.