1100 Aluminia Folio por Vendo: Gradoj, Grandecoj kaj Gvidilo de Aĉetantoj

Enkonduko

1100 aluminum sheet is one of the most practical commercially pure aluminum plates you can buy: with a minimum 99.0% aluminum content and a small copper addition, it is slightly stronger than 1050/1060 while keeping excellent formability, koroda rezisto, weldability and thermal conductivity.

It is the default sheet for chemical equipment, cookware and deep-drawn parts, varmegoj, signs and general fabrication that do not need high strength.

Offered factory-direct, 1100 sheet can be supplied in standard 4×8 ft and metric sizes or cut to your dimensions, with the temper and surface finish the product needs.

This guide covers the composition, propraĵoj, sizes and weights, aplikoj, fabrikado, kiel ĝi komparas kun 1050, 1060 kaj 3003, and how to order.

Kio Estas 1100 Folio de Aluminio?

1100 is a non-heat-treatable 1xxx-series alloy strengthened only by cold work and softened by annealing. Sheet generally runs about 0.2–6 mm thick (thicker material is plate), supplied flat or cut to length. Ĝiaj karakterizaj avantaĝoj estas:

• Bonega fleksebleco por fleksado, Stampado, turniĝanta kaj profunda desegnaĵo, precipe en la O humoro.
• Very good atmospheric and chemical corrosion resistance from the self-healing oxide film.
• Iomete pli alta forto ol 1050/1060 thanks to a controlled 0.05–0.20% copper addition.
• High thermal and electrical conductivity, plus excellent weldability and easy machining.
• Lumo (pri 2.71 g/cm³), rust-free and lower cost than alloyed grades; anodizes to a good film.
• The trade-off is modest strength; load-bearing or wear parts should use 3003, 5052 aŭ 6061.

Kemia Komponado kaj Mekanikaj Propraĵoj

La kontrolita kemio (per ASTM B209 / GB/T 3190) keeps silicon plus iron and copper within tight limits so forming, welding and corrosion performance stay high:

Elemento	Al	Kaj + Fe	Cu	Mn	Zn
1100	≥99,0	≤0,95	0.05–0,20	≤0,05	≤0,10

 

Mechanical properties change with temper, do same 1100 folio povas esti liverita mola kaj profunde tirebla aŭ malmola kaj rigida (typical Rm values):

Temperaro	Streĉita (MPa)	Karaktero
O (kovrita)	ĉ.. 75–110	Plej mola; Profunda Desegno, ŝpinante, maksimuma formebleco
H12 / H22	ĉ.. 95–125	Kvarone malmola; lumo formiĝanta
H14 / H24	ĉ.. 110–150	Duone malmola; common general-purpose temper
H16 / H26	ĉ.. 135–170	Tri-kvarona malmola; pli rigidaj paneloj
H18	ĉ.. 150–200	Plen-malmola; rigida, limigita formado

 

Valoroj iomete varias laŭ dikeco kaj normo; confirm tensile and yield on the mill certificate for your gauge.

The small copper addition is what distinguishes 1100 in service.

It gives a modest but useful gain in strength without sacrificing the pure-aluminum forming that lets the sheet be drawn into deep pots and liners, and the metal still anodizes into a uniform, protective film used on trim and nameplates.

1100 thus occupies a deliberate middle ground—not as soft and conductive as 1060, but not as alloyed as 3003, which is why it appears so often in cookware, chemical and general-purpose stock.

Normaj Grandecoj, Surfacoj kaj Pezo

1100 folio estas produktita el ĉ 0.2 al 6 mm (telero al 200 mm+ laŭ peto), en larĝoj ĝis proksimume 2600 mm kaj longoj al 12,000 mm. Common sizes include 4×8 ft (1219×2438), 1000×2000, 1220×2440, 1250×2500 and 1500×3000, plus custom blanks to drawing.

Surfaco / fini	Tipa uzo
Muelejo fino (optional PVC/PVDF protective film)	Ĝenerala folio, fabrikado stoko, tegaĵo
Brosis / spegulo	Ornamaj paneloj, nomplatoj, Lumigado
Anodigita / kolorkovrita	Chemical and outdoor panels, durable signage, trim
Reliefita / circles	Izolaĵo, anti-slip, cookware discs and deep-drawn parts

 

Weight is easy at 2.71 g/cm³: kg per m² = dikeco (mm) × 2.71; a 4×8 ft sheet covers about 2.972 m².

Dikeco	kg/m²	Pezo por 4×8 folio
0.5 mm	1.36	ĉ.. 4.0 KG
1.0 mm	2.71	ĉ.. 8.1 KG
1.5 mm	4.07	ĉ.. 12.1 KG
2.0 mm	5.42	ĉ.. 16.1 KG
3.0 mm	8.13	ĉ.. 24.2 KG

Tipaj Aplikoj

• Ekipaĵo por kemia procezo, Stokaj Tankoj, vazojn, pipes and fittings that need corrosion resistance and weldability.
• Kuirejo, cooking utensils and deep-drawn or spun parts, plus aluminum circles for pots and pans.
• Varmo-lavujoj, lampreflektoroj, botelĉapo stoko, printing plates and food packaging components.
• Signoj, nameplates and decorative or anodized architectural trim, and general stamped or bent parts.

Fabrication and Surface Treatment

1100 cuts, shears, bends and forms readily and can be laser, plasma or water-jet cut, stampita, spun and drilled; it welds cleanly by common processes and takes anodizing, brosado, polishing and coating well.

Use O temper for the deepest draws and harder tempers where the finished part must hold shape; generous bend radii and clean, oil-free surfaces help on high-speed lines.

1100 vs 1050, 1060 kaj 3003

Grado	Min. Al / alojo	Forto	Plej taŭga
1050	99.50% Al	Malalta	Most economical general sheet and cladding
1060	99.60% Al	Malalta	Best conductivity/reflectivity; signs and electrical parts
1100	99.00% Al, iom Cu	Malalta-meza	Iomete pli forta; formante, veldado, kemia, Kuirilaro
3003	Al + Mn (pri 1.2%)	Meza	Pri 20% pli forta; plankoj, tread, tougher cladding

 

Elektu 1100 when you need a little more strength and weldability than 1050/1060 with the same pure-aluminum forming and corrosion; paŝi al 3003 for real added strength.

Kvalita Kontrolo, Pricing and How to Order

QC covers thickness and flatness, larĝo/longo kaj diagonala toleremo, surface quality and tensile/yield by temper and chemistry on the MTC; ISO 9001 mills support SGS/BV inspection.

Sheet is interleaved with protective film and packed on pallets or in cases with moisture-proof wrapping for export. Prezo sekvas la aluminian ingotan bazon plus pretigan kotizon, with thinner/wider gauge, laŭmenda tranĉado, surfaca traktado kaj malgrandaj kvantoj aldonante koston;

compare per ton and per finished blank on identical specs under FOB/CFR/CIF (komune 30% deponejo, ekvilibro kontraŭ la konado). Citi, sendu alojon/temperaĵon (1100), dikeco, folio aŭ malplenaj dimensioj, surfaco, kvanto, aplikaĵo kaj celhaveno.

Verify new material on production-gauge samples rather than photos: run the sheet through your forming, welding or cutting line at normal speed, measure thickness across the width, inspect the surface and, for food or chemical use, confirm the compliance paperwork matches the lot.

A signed pre-production sample then becomes the receiving standard, and an integrated mill that rolls and finishes in-house will hold that standard more reliably across repeat orders than spot resellers.

Oftaj Demandoj

Q: Kio estas 1100 aluminia folio uzata por?

A: Chemical tanks, vessels and piping, cookware and deep-drawn parts, varmegoj, signoj, bottle cap and printing stock, and general fabrication needing formability and corrosion rather than high strength.

Q: Kiel forta estas 1100 kompare kun 1060 kaj 3003?

A: It is slightly stronger than 1050/1060 due to a small copper addition, sed 3003 (mangano) is about 20% pli forta; H18 1100 reaches roughly 150–200 MPa tensile.

Q: Kian humoron mi elektu?

A: O for deep drawing and spinning, H14/H24 for general sheet, H16/H26 for stiffer panels and H18 for the most rigid plate with little forming.

Q: What sizes and thicknesses are available?

A: About 0.2–6 mm sheet in widths to roughly 2600 mm, inkluzive de 4×8 ft kaj metrikaj normoj, with plate and cut-to-size blanks on request.

Q: Can it be welded, anodized and cut to size?

A: Yes—1100 welds cleanly, anodizes and finishes well, and can be laser or sawn cut, bent and supplied as custom blanks with protective film.

Q: Kiom pezas folio 4×8?

A: Proksimume 8.1 kg je 1 mm, 12.1 kg je 1.5 mm, 16.1 kg je 2 mm kaj 24.2 kg je 3 mm, uzante kg/m² = dikeco (mm) × 2.71 super 2.972 m².

Konkludo

1100 aluminum sheet is the slightly stronger, easy-to-fabricate pure-aluminum plate for chemical equipment, Kuirilaro, heat transfer and signs.

Specifi la temperamenton de kiel la panelo estas prilaborita, ripari dikecon kaj tranĉi grandecon, choose the surface, kaj aĉetu sur muelejajn atestojn, tolerances and approved samples rather than price alone.