1100 Bileog Alúmanam ar Díol: Gráid, Méideanna agus Treoir Cheannaitheora

Tabhairt isteach

1100 aluminum sheet is one of the most practical commercially pure aluminum plates you can buy: with a minimum 99.0% aluminum content and a small copper addition, it is slightly stronger than 1050/1060 while keeping excellent formability, friotaíocht creimeadh, weldability and thermal conductivity.

It is the default sheet for chemical equipment, cookware and deep-drawn parts, doirteal teasa, signs and general fabrication that do not need high strength.

Offered factory-direct, 1100 sheet can be supplied in standard 4×8 ft and metric sizes or cut to your dimensions, with the temper and surface finish the product needs.

This guide covers the composition, maoine, sizes and weights, iarratais, déantúsaíocht, conas a chuirtear i gcomparáid le 1050, 1060 agus 3003, agus conas a ordú.

Cad É 1100 Bileog Alúmanam?

1100 is a non-heat-treatable 1xxx-series alloy strengthened only by cold work and softened by annealing. Sheet generally runs about 0.2–6 mm thick (thicker material is plate), supplied flat or cut to length. Tá a buntáistí tréith:

• insínteacht den scoth le haghaidh lúbthachta, stampáil, sníomh agus líníocht dhomhain, go háirithe sa O temper.
• Very good atmospheric and chemical corrosion resistance from the self-healing oxide film.
• Neart beagán níos airde ná 1050/1060 thanks to a controlled 0.05–0.20% copper addition.
• High thermal and electrical conductivity, plus excellent weldability and easy machining.
• Solas (faoi 2.71 g/cm³), rust-free and lower cost than alloyed grades; anodizes to a good film.
• The trade-off is modest strength; load-bearing or wear parts should use 3003, 5052 nó 6061.

Comhdhéanamh Ceimiceach agus Airíonna Meicniúla

An cheimic rialaithe (per ASTM B209 / GB/T. 3190) keeps silicon plus iron and copper within tight limits so forming, welding and corrosion performance stay high:

Eilimint	Al	Agus + Fe	Cu	Mn	Zn
1100	≥99.0	≤0.95	0.05–0.20	≤0.05	≤0.10

 

Mechanical properties change with temper, mar sin mar an gcéanna 1100 is féidir leathán a sholáthar bog agus domhain-intharraingthe nó crua agus docht (typical Rm values):

Teocht	Teanntachta (MPa)	Carachtar
O (Anúite)	thart. 75–110	is boige; líníocht dhomhain, ag sníomh, formability uasta
H12 / H22	thart. 95–125	Ceathrú-chrua; foirmiú solais
H14 / H24	thart. 110–150	Leath-chrua; common general-purpose temper
H16 / H26	thart. 135–170	Trí cheathrú-chrua; painéil níos déine
H18	thart. 150–200	Lán-chrua; docht, foirmiú teoranta

 

Athraíonn luachanna beagán de réir tiús agus caighdeánach; confirm tensile and yield on the mill certificate for your gauge.

The small copper addition is what distinguishes 1100 in service.

It gives a modest but useful gain in strength without sacrificing the pure-aluminum forming that lets the sheet be drawn into deep pots and liners, and the metal still anodizes into a uniform, protective film used on trim and nameplates.

1100 thus occupies a deliberate middle ground—not as soft and conductive as 1060, but not as alloyed as 3003, which is why it appears so often in cookware, chemical and general-purpose stock.

Méideanna Caighdeánacha, Dromchlaí agus Meáchan

1100 táirgtear leathán ó thart ar 0.2 chuig 6 mm (pláta go 200 mm+ ar iarratas), ar leithead suas go garbh 2600 mm agus faid go 12,000 mm. Common sizes include 4×8 ft (1219×2438), 1000×2000, 1220×2440, 1250×2500 and 1500×3000, plus custom blanks to drawing.

Dromchla / chríochnaigh	Úsáid tipiciúil
Críoch an mhuilinn (optional PVC/PVDF protective film)	Bileog ghinearálta, stoc monaraithe, cumhdach
Scuabtha / scáthán	Painéil maisiúil, ainmniúcháin, soilsiú
Anóidithe / dath-brataithe	Chemical and outdoor panels, durable signage, Baile Átha Troim
cabhraithe / circles	Insliú, anti-slip, cookware discs and deep-drawn parts

 

Weight is easy at 2.71 g/cm³: kg in aghaidh an m² = tiús (mm) × 2.71; a 4×8 ft sheet covers about 2.972 m².

Tiús	kg/m²	Meáchan in aghaidh an bhileog 4×8
0.5 mm	1.36	thart. 4.0 kg
1.0 mm	2.71	thart. 8.1 kg
1.5 mm	4.07	thart. 12.1 kg
2.0 mm	5.42	thart. 16.1 kg
3.0 mm	8.13	thart. 24.2 kg

Feidhmchláir tipiciúla

• Chemical process equipment, umair stórála, vessels, pipes and fittings that need corrosion resistance and weldability.
• Cócaireán, cooking utensils and deep-drawn or spun parts, plus aluminum circles for pots and pans.
• Doirtil teasa, frithchaiteoirí lampa, stoc caipín buidéal, printing plates and food packaging components.
• Comharthaí, nameplates and decorative or anodized architectural trim, and general stamped or bent parts.

Fabrication and Surface Treatment

1100 cuts, shears, bends and forms readily and can be laser, plasma or water-jet cut, stampáilte, spun and drilled; it welds cleanly by common processes and takes anodizing, scuabadh, polishing and coating well.

Use O temper for the deepest draws and harder tempers where the finished part must hold shape; generous bend radii and clean, oil-free surfaces help on high-speed lines.

1100 vs 1050, 1060 agus 3003

Grád	Min. Al / cóimhiotal	Neart	Is fearr oiriúnach
1050	99.50% Al	Íseal	Most economical general sheet and cladding
1060	99.60% Al	Íseal	Best conductivity/reflectivity; signs and electrical parts
1100	99.00% Al, beagán Cu	Íseal-mheán	Beagán níos láidre; cruthú, táthú, ceimiceach, cócaireán
3003	Al + Mn (faoi 1.2%)	Meánach	Thart ar 20% de dhíriú ar; urláir, tread, tougher cladding

 

Roghnaigh 1100 when you need a little more strength and weldability than 1050/1060 with the same pure-aluminum forming and corrosion; céim suas go dtí 3003 for real added strength.

Rialú Cáilíochta, Pricing and How to Order

QC covers thickness and flatness, leithead/fad agus lamháltas trasnánach, surface quality and tensile/yield by temper and chemistry on the MTC; ISO 9001 mills support SGS/BV inspection.

Sheet is interleaved with protective film and packed on pallets or in cases with moisture-proof wrapping for export. Leanann an praghas an bonn tinne alúmanaim chomh maith le táille próiseála, with thinner/wider gauge, gearradh saincheaptha, cóireáil dromchla agus cainníochtaí beaga ag cur leis an gcostas;

compare per ton and per finished blank on identical specs under FOB/CFR/CIF (coitianta 30% deposit, balance against the bill of lading). A lua, seol cóimhiotal/temper (1100), tiús, leathán nó toisí bána, dromchla, chainníocht, iarratas agus calafort ceann scríbe.

Verify new material on production-gauge samples rather than photos: run the sheet through your forming, welding or cutting line at normal speed, tiús a thomhas ar fud an leithead, inspect the surface and, for food or chemical use, confirm the compliance paperwork matches the lot.

A signed pre-production sample then becomes the receiving standard, and an integrated mill that rolls and finishes in-house will hold that standard more reliably across repeat orders than spot resellers.

Ceisteanna Coitianta

C: Cad é 1100 bileog alúmanaim a úsáidtear le haghaidh?

A: Chemical tanks, vessels and piping, cookware and deep-drawn parts, doirteal teasa, comharthaí, bottle cap and printing stock, and general fabrication needing formability and corrosion rather than high strength.

C: Cé chomh láidir is atá 1100 i gcomparáid le 1060 agus 3003?

A: It is slightly stronger than 1050/1060 due to a small copper addition, ach 3003 (mangainéis) is about 20% de dhíriú ar; H18 1100 reaches roughly 150–200 MPa tensile.

C: Cén temper ba chóir dom a roghnú?

A: O for deep drawing and spinning, H14/H24 for general sheet, H16/H26 for stiffer panels and H18 for the most rigid plate with little forming.

C: What sizes and thicknesses are available?

A: About 0.2–6 mm sheet in widths to roughly 2600 mm, lena n-áirítear 4 × 8 tr agus caighdeáin mhéadracha, with plate and cut-to-size blanks on request.

C: Can it be welded, anodized and cut to size?

A: Yes—1100 welds cleanly, anodizes and finishes well, and can be laser or sawn cut, bent and supplied as custom blanks with protective film.

C: Cé mhéad atá ar bhileog 4×8?

A: Go garbh 8.1 kg ag 1 mm, 12.1 kg ag 1.5 mm, 16.1 kg ag 2 mm agus 24.2 kg ag 3 mm, ag baint úsáide as kg/m² = tiús (mm) × 2.71 thar 2.972 m².

Conclúid

1100 aluminum sheet is the slightly stronger, easy-to-fabricate pure-aluminum plate for chemical equipment, cócaireán, heat transfer and signs.

Sonraigh an meon ón gcaoi a ndéantar an painéal a phróiseáil, tiús agus méid gearrtha a shocrú, choose the surface, agus a cheannach ar dheimhnithe muileann, lamháltais agus samplaí ceadaithe seachas praghas amháin.