Kab lig kev cai 1060 Aluminium Ntawv: Grades, Tempers, Sizes and Buyer’s Guide
Kab lig kev cai 1060 Aluminium Ntawv: Grades, Tempers, Sizes and Buyer’s Guide
Lub hauv paus rau phau ntawv
Kab lig kev cai 1060 aluminum sheet is one of the most widely ordered commercially pure aluminum plates in the world.
As a 1xxx-series grade with a minimum 99.60% aluminum content, 1060 combines excellent formability, corrosion kuj, electrical and thermal conductivity and weldability with a low, stable price
—which makes it the default choice for signage, building cladding, insulation jacketing, lamp reflectors, cua sov dab dej, stamping and deep-drawn parts that do not need high strength.
Ordering it as a “custom” product means fixing the temper, qhov tuab, sheet size, surface finish and cut dimensions to your product rather than accepting stock plate.
This short guide covers the composition and mechanical properties of 1060, how to choose the temper, standard sizes and weights, cov ntawv thov raug, how it compares with 1050, 1100 thiab 3003, and what to specify when ordering factory-direct.
Dab tsi yog 1060 Aluminium Ntawv?
1060 is a non-heat-treatable commercially pure aluminum; it is strengthened only by cold working and softened by annealing. Sheet generally runs from about 0.2 rau 6 Mm tuab (thicker material is classed as plate), supplied flat or in cut-to-length panels. Its characteristic advantages are:
- Excellent ductility for bending, tau luam tawm, spinning and deep drawing, especially in the O temper.
- Very good atmospheric corrosion resistance from the natural oxide film, ideal for outdoor signage and insulation jacketing.
- High electrical and thermal conductivity, suited to busbars, battery connectors, reflectors and heat-spreading parts.
- Excellent weldability and easy machining, cutting and anodizing.
- Tsawg ntom ntom (txog 2.71 g/cm³) for light, rust-free panels, at a lower cost than alloyed grades.
- The trade-off is low mechanical strength; load-bearing or high-wear parts should use 3003, 5052 los yog 6061 fab ntxeev.
Composition and Mechanical Properties
The controlled chemistry (rau GB / T 3190, hnyav %) keeps iron and silicon low so conductivity and corrosion resistance stay high:
| Lub ntsiab | Al | Thiab | Fe | Cu | Mn | Mg | Zn | Ntawm |
| 1060 | ≥99.60 | I≤0.25 | ≤ 0.35 | I≤0.05 | I≤0.03 | I≤0.03 | I≤0.05 | I≤0.03 |
Mechanical properties change sharply with temper, so the same 1060 sheet can be supplied soft and deep-drawable or hard and rigid:
| Kub | Lub zog tensile (MPa) | Elongation | Cim |
| O (ib qho tseem ceeb) | kwv yees li. 60-100 | 25-40% | softest; Kev sib sib zog nqus duab, kiv, siab kawg formability |
| H12 / H22 | kwv yees li. 75–115 | 10–20% | Quarter-hard; light forming |
| H14 / H24 | kwv yees li. 95–135 | 6-15% | Ib nrab nyuaj; the common general-purpose and sign temper |
| H16 / H26 | kwv yees li. 120-160 | 3-10% | Three-quarter-hard; stiffer panels |
| H18 | kwv yees li. 160–190 | 2-8% | Siab tawv; rigid, limited forming |
Values vary slightly with thickness and standard; always confirm the tensile and yield range on the mill certificate for your gauge.
Standard Sizes, Surfaces and Weight
1060 sheet is produced from about 0.2 rau 6 mm (plate to 200 mm+ on request), in widths up to roughly 2600 mm and lengths to 12,000 mm. Common stock and cut sizes include 4×8 ft (1219×2438 mm), 4×10 ft, 1000×2000, 1220×2440, 1250×2500 and 1500×3000 mm, plus fully custom blanks cut to your drawing.
| Nto / ua tiav | Hom kev siv |
| Zeb tiav (with optional PVC/PVDF protective film) | General sheet, cladding, fabrication stock |
| Txhuam / hairline or mirror-polished | Decorative panels, Npe, Teeb |
| Anodized or color-coated (PVDF/PE) | Curtain wall, vov tsev, durable outdoor signage |
| Embossed stucco / five-bar tread | Insulation jacketing, anti-slip and decorative sheet |
Weight is easy to calculate at a density of 2.71 g/cm³: kg per m² = thickness (mm) Txoj ntsiab lus 2.71. A 4×8 ft sheet covers about 2.972 m² os.
| Thickness | kg/m² | Weight per 4×8 sheet |
| 0.5 mm | 1.36 | kwv yees li. 4.0 kg |
| 1.0 mm | 2.71 | kwv yees li. 8.1 kg |
| 1.5 mm | 4.07 | kwv yees li. 12.1 kg |
| 2.0 mm | 5.42 | kwv yees li. 16.1 kg |
| 3.0 mm | 8.13 | kwv yees li. 24.2 kg |
Tej kev siv
- Kev dai yus, kev qhia, nameplates and advertising boards – usually H14/H18 sheet that prints, anodizes and vinyl-mounts cleanly.
- Building curtain wall, vov tsev, ceiling and decorative panels, often anodized or color-coated.
- Anti-corrosion insulation jacketing (aluminum cladding) for pipes, tanks and ducting, frequently stucco-embossed and in H14/H16.
- Lamp reflectors, lighting parts, heat sinks and radiator components, plus battery flexible connectors and conductive parts.
- Lub poom mov ua noj, lamp shells and deep-drawn or spun parts in soft O temper, plus general stamping, bending and laser-cut blanks.
1060 vs 1050, 1100 thiab 3003
| Teem nqi | Lub min. Al / alloying | Lub zog | Best fit |
| 1050 | 99.50% Al | Qi | Most economical general sheet, cladding and insulation |
| 1060 | 99.60% Al | Qi | Signs, conductive and reflective parts; better conductivity than 1050 |
| 1100 | 99.00% Al, a little Cu | Tsawg- nruab nrab | Muaj zog me ntsis; kev sib sau, vuam, Cov Khoom Siv Tshuaj, lub poom mov ua noj |
| 3003 | Al + Mn (txog 1.2%) | Nruab nrab | Txog 20% muaj zog, better for floors, tread plate and tougher cladding |
Xaiv 1060 when purity, conductivity, reflectivity or price leads and strength is not critical; step up to 1100 for a little more strength and weldability, thiab rau 3003 (los yog 5052/6061) for load-bearing, abrasion or structural duty.
Custom Options, Quality Control and Ordering
A custom 1060 order can specify temper (O, H12/H14/H16/H18 or H22/H24/H26), thickness and tolerance, sheet or blank dimensions, edge type (slit or sawn), nto tiav, protective film, anodizing/coating color, embossing and packaging. Fabrication services often include laser, plasma or water-jet cutting, dabtsi yog khoov, punching, drilling and CNC blanks made to drawing.
Quality control covers thickness and flatness, width/length and diagonal tolerance, Nto Zoo (tsis muaj khawb, stains, oil or roll marks on critical faces), tensile properties by temper and alloy chemistry on the mill test certificate;
ISO 9001 mills support SGS/BV/TUV inspection. Sheets are normally interleaved with protective film, packed on wooden pallets or in wooden cases with moisture-proof wrapping for export.
Pricing follows the aluminum ingot base plus a processing fee, with thinner or wider gauge, custom cutting, surface treatment and small quantities adding cost; compare suppliers per ton and per finished blank on identical temper, ntsuas, size and finish, under FOB/CFR/CIF terms (feem ntau 30% deposit with balance against the bill of lading).
Cov Lus Nquag Nug
Q: What is custom 1060 Aluminium ntawv siv rau?
A: Cov cim qhia thiab cov npe, building cladding and roofing, pipe/tank insulation jacketing, Reforsors, cua sov dab dej, conductive parts, cookware and stamped, spun or deep-drawn components that need formability and corrosion resistance rather than high strength.
Q: What temper should I choose?
A: Use O for deep drawing and spinning, H14/H24 for general sheet and signage, H16/H26 for stiffer panels and H18 for the flattest, most rigid sheet with little forming.
Q: What thicknesses and sizes are available?
A: Common sheet runs 0.2–6 mm in widths up to about 2600 mm, including 4×8 ft and metric standards, with plate and fully custom cut-to-size blanks on request.
Q: How much does a 4×8 sheet weigh?
A: Kwv yees li 8.1 kg at 1 mm, 12.1 kg at 1.5 mm, 16.1 kg at 2 mm thiab 24.2 kg at 3 mm, using kg/m² = thickness (mm) Txoj ntsiab lus 2.71 saum 2.972 m² os.
Q: 1060 vs 3003 sheet – which do I need?
A: 1060 for economy, conductivity and corrosion resistance in light-duty work; 3003 when you need about 20% more strength for floors, tread phaj, roofing or tougher formed parts.
Q: Can it be anodized, coated and cut to size?
A: Yog lawm. 1060 anodizes well and can be brushed, mirror-polished, color-coated, embossed and supplied with protective film, plus laser-cut, bent or CNC-fabricated to your drawing.
Xaus
Kab lig kev cai 1060 aluminum sheet is the economical, easy-to-fabricate pure-aluminum workhorse for signage, cladding, kev rwb thaiv tsev, reflectors and formed parts.
Specify the temper from how the panel is processed (O for deep forming, H14/H24 for general and sign use, H18 for rigidity), fix thickness and cut size, choose the surface finish, and buy on mill certificates, dimensional tolerances and approved samples rather than price alone.
