8079 O Temper 0.0075mm Laminated Foil

I. Tlhaloso ea Sehlahisoa

8079 O Temper 0.0075mm Laminated Foilke foil ea aluminium ea laminated e tšesaane haholo e etselitsoeng lits'ebetso tsa boleng bo holimo. E kopanya ts'ebetso e phahameng ea 8079 motsoako oa aluminium o nang le tenyetseha e feteletseng e fihlelletsoeng ka O-temper annealing.

II. Substrate ea mantlha & Tlhahlobo ea Ts'ebetso

2.1 Substrate ea mantlha: Litšobotsi tsa 8079 Aluminium Alloy

• Allow:Ke ea 8xxx letoto la aluminium alloy. Karolo ea mantlha ke aluminium (Balance), e nang le 0.7%-1.3% Iron, ≤0.10% silicon, le ho latela bongata ba koporo, Manang's, zinki, etc. Karolo ea eona ea mantlha ke tšepe e phahameng, sebopeho sa silicon e tlase [6].
• Litšobotsi tsa mantlha:E seng chefo, e senang monko, boemo ba polokeho ea lijo. E na le ductility e ntle haholo, ho thatafala, le thepa ea barrier. Bokaholimo bo hloekile ebile ho bonolo ho laminate. E hanyetsana le mocheso o phahameng le o tlase (-60°C ho isa ho 260°C), a loketse bakeng sa ultra-thin rolling le lamination processing [6].
• Ho bapisoa le Li-alloys tse tšoanang (E.g., 8011):E fana ka matla le boima bo phahameng, tshebetso e babatsehang ya ho taka, le khanyetso e matla ea ho phunya. E loketse bakeng sa maemo a holimo a nepahetseng a lamination.

2.2 Bohale bo Bohloko: He bohale (Naha ea Annealed) Tlhaloso

• Bohale Tlhaloso:​ Kalafo e kentsoeng ka botlalo ho fihlela boemo bo bonolo ba thepa, ka polasetiki e ntle haholo, e phahameng haholo, le ho felisoa ha khatello ea maikutlo.
• Tšusumetso ho Sehlahisoa:E netefatsa ts'ebetso bakeng sa litlhaloso tsa ultra-thin 0.0075mm, ho fana ka bokgoni bo kgabane ba ho mena le ho bopa ho lekana dibopeho tse rarahaneng. E boetse e ntlafatsa botsitso ba sekhomaretsi nakong ea lamination le ho thibela interlayer delamination.

2.3 Ts'ebetso ea mantlha: Lamination Process Details

• Molao-motheo oa Lamination:Ho kopanya 8079 O-temper aluminium foil (0.0075mm) ka lisebelisoa tse sebetsang joalo ka PET, Pe, pampiri ea kraft, etc., ka ho kopanya mocheso, Kholiseho, kapa mekhoa ea ho lamination e omileng e se nang solvent.
• Litlhoko tsa Ts'ebetso ea Bohlokoa:Aluminium foil surface e fumana kalafo ea electrostatic degreasing, ka tsitsipano ea holim'a metsi ≥38 dyn / cm; laola mocheso oa motsoako (120-200°C) le kgatello (0.5-2MPa).
• Melemo ea Ts'ebetso:​ E kopanya thepa ea litšitiso ea foil ea aluminium le ts'ebetso ea lisebelisoa tse kopaneng, ho theha se ikemiseditseng “aluminium foil + lera le sebetsang” tsamaiso ea mokoallo.

2.4 Botenya Tšobotsi: Melemo ea mantlha ea 0.0075mm (7.5μm)

• Boemo ba Botenya:E oela ka har'a sehlopha sa foil ea aluminium e tšesaane haholo (4.5-9μm), ho rua “sebopeho se sa bonahaleng” litšobotsi.
• Melemo ea mantlha:E bobebe, tenyetsehang e babatsehang, bonolo ho seha le ho theha, ha u ntse u boloka ts'ebetso e phahameng ea thibelo.

III. Lipontšo tsa Ts'ebetso ea Konokono

3.1 Thepa ea Motheo ea 'Mele

• Botenya:0.0075mm ± mamello (customisable), e nang le botenya bo phahameng.
• Ponahalo:Hloekileng, bokantle, ntle le oli, Poholes, le mengwapo.
• Thepa ea Mechini:Matla a tensile 90-110 MPa, emplation 13%-18%, Erichsen boleng 6.2-7.3 mm.

3.2 Ts'ebetso ea mantlha ea ts'ebetso

• Ts'ebetso ea Monyatsi:Sekhahla sa phetiso ea oksijene <0.01 G / M² / Letsatsi, mokoallo o haufi le ho phetheha.
• Ts'ebetso ea Laye:Matla a phahameng a li-interlayer bond, ha ho delamination.
• Ho hanyetsa Mocheso:E lula e tsitsitse ho tloha ho -73°C ho isa ho 371°C.
• Ts'ebetso ea Ts'ebetso:Ho bonolo ho khaola, Punch, le tiiso ea mocheso; e tsamaellanang le mela ya tlhahiso ya lebelo le phahameng.

3.3 Tšireletseho le Ts'ebetso ea Tikoloho

• Tshireletso Tshebetso:E seng chefo, e senang monko, e lumellana le litekanyetso tsa bohloeki bakeng sa lijo le liphutheloana tsa meriana.
• Ts'ebetso ea tikoloho:Aluminium foil e ka sebelisoa hape, ho fihlela litlhoko tsa tlhahiso ea khabone e tala le e tlase.

IV. Libaka tsa Kopo

4.1 Packaging ea boemo bo holimo

• Ho paka lijo:Pakete ea vacuum e tšesaane haholo, sephutheloana sa ka hare sa premium snack, phutheloana e bolokang monko bakeng sa lijo tse entsoeng ka phofo.
• Pagectication ea meriana:Pakete ea blister ea mofuta o batang, sephutheloana sa li-capsules/tablet.

4.2 Tsa elektroniki & Matla a Macha

• Lithium Battery Packaging:Substrate e ka hare bakeng sa mekotla ea betri ea lithium e tenyetsehang (filimi ea aluminium-plastiki).
• Ts'ireletso ea Motsoako oa Electronic:Sebaka sa ts'ireletso bakeng sa likaroloana tse nyane tsa elektroniki le li-PCB.

4.3 Libaka tsa Liindasteri tsa Precision

• Precision Instrument Packaging:Sephutheloana se sireletsang bakeng sa lisebelisoa tse nyane tse nepahetseng le li-sensor.
• Likopo Tse Ling:Thepa ea motheo ea boleng bo holimo, ultra-thin insulation layer substrate, e loketseng bakeng sa maemo a sefofane.

V. Litlhaloso tsa Sehlahisoa & Litšebeletso tse ikhethileng

5.1 Litlhaloso tse Tloaelehileng

(Lethathamo la Litlhaloso E bolokiloe)

5.2 Litšebeletso tse ikhethileng

• Specification Customization:Tokiso e ntle ea mamello ea botenya, ho iketsetsa bophara/bolelele.
• Lamination Customization:Iketsetse lisebelisoa tse kopaneng le likarolo tse sebetsang.
• Ho Itloaetsa Phekolo ea Bokahohle:Khatiso e holimo, liphekolo tsa ho roala.

VI. Melemo ea Sehlahisoa & Tlholisano ea 'Maraka

6.1 Melemo ea Sehlahisoa sa Konokono

• Molemo oa Lintho:High-iron, silicon e tlase 8079 alloy e fana ka matla a holimo le ho hanyetsa ho phunya.
• Molemo oa ho halefa:O-temper annealing e rarolla ntlha ea bohloko ea ho robeha habonolo ka foil e tšesaane haholo..
• Molemo oa Ts'ebetso:Precision lamination e fihlella lipheo tse peli tsa “tshebetso + bosaane.”
• Specification Molemo:Tlhaloso ea 0.0075mm e tlatsa lekhalo la 'maraka la niche bakeng sa foil e phahameng haholo e tšesaane..

6.2 Tlholisano ea 'Maraka

• Niche Dominance:E tsepamisitse maikutlo ho tse tšesaane haholo, marakeng a phahameng a nepahetseng a laminated foil.
• Molemo oa Boleng:​ Taolo e tiileng holim'a tekano ea botenya e netefatsa boleng bo tsitsitseng.
• Molemo oa ho itloaetsa:Phetoho e feto-fetohang ea paramente ho lumellana le maemo a fapaneng.

VII. Mabapi le Henan Huawei Aluminium Co., Ltd.

7.1 Boemo ba Khoebo

Henan Huawei Aluminium Industry Co., Ltd. e 'nile ea sebetsa ka botebo tšimong ea aluminium alloy deep processing ka lilemo tse ngata, ho shebana le foil ea aluminium ea boemo bo holimo le tlhahiso ea lihlahisoa, ka boitseanape bo tebileng ba tekheniki le boiphihlelo ba foil e tšesaane haholo le ea laminated.

7.2 Matla a mantlha & Bokhoni ba Tlhahiso

• Thepa Matla:E na le mela e tsoetseng pele ea tlhahiso ea malapeng le ea machabeng bakeng sa ho roala le ho lamination hantle haholo..
• Matla a Theknoloji:Setsebi sa R&Sehlopha sa D se khomarela ka thata litekanyetso tsa indasteri.
• Taolo ea Boleng:Sistimi e felletseng ea taolo ea boleng e netefatsang boleng bo tsitsitseng ba sehlahisoa.

7.3 Boemo ba Khoebo & Moralo oa 'Maraka

• Lihlahisoa tsa mantlha:E kenyeletsa 8079, 8011, le tse ling tse 8-series aluminium alloy foil, le 8079 O-temper Ultra-thin laminated foil e le sehlahisoa sa bohlokoahali.
• Tšebeliso ea 'Maraka:E thehiloe China, ho sebeletsa lefatshe ka bophara, e nang le setšoantšo se matla sa lebitso.

7.4 Mokhatlo oa Khamphani le Sehlahisoa sena

Sehlahisoa sena ke se seng sa lihlahisoa tsa mantlha tsa Henan Huawei Aluminium, ho sebelisa tsebo e tebileng ea tekheniki ea k'hamphani ho 8079 ts'ebetso ea alloy ho netefatsa hore ho latela maemo a ts'ebetso ka botlalo.

VIII. Polokelo & Litlhokomelo tsa Tšebeliso

8.1 Litlhoko tsa polokelo

• Tikoloho:Boloka sebakeng se ommeng, e kenya moea, sebaka se phodileng, ho qoba mongobo le mocheso o phahameng.
• Mokhoa:​ Boloka lirola ka ho otloloha ho qoba khatello le tšusumetso.
• Shelfe:. 12 likhoeli tlas'a maemo a tloaelehileng a polokelo.

8.2 Litlhokomelo tsa Tšebeliso

• Ho sebetsa:Laola matla ho qoba ho otlolla ho feta tekano; laola mocheso ho tiisa mocheso.
• Maemo a Kopo:Qoba tikoloho e matla ea asiti / alkali; ikamahanye le litekanyetso tsa bohloeki.

IX. LIPOTSO TSE BOTSOANG HANGATA

• Q: Interlayer delamination e etsahala.
  • A:Ntlafatsa liparamente tsa lamination le ho ntlafatsa kalafo ea bokaholimo ba substrate.
• Q: Ho hlaha masoba kapa mengoallo holim'a foil.
  • A:​ Matlafatsa tšireletso ea tlhahiso le ho ntlafatsa ho nepahala ha lisebelisoa.
• Q: Foil e robeha habonolo nakong ea ts'ebetso.
  • A:​ Netefatsa katleho ea O-temper annealing le ho fetola matla a ho sebetsa.
• Q: Ts'ebetso ea lithibelo ha e maemong a holimo.
  • A:Lekola botšepehi ba sebopeho sa lamination 'me u ntlafatse ts'ebetso e kopaneng.