1060 aluminiomu bankanje
Awoṣe:1060 Aluminiomu bankanje
Awọn ohun elo:Iṣakojọpọ, itanna, igboru sara
Isọdi:Oluwọn, fifẹ, irunu
Awọn iwe-ẹri:ISO 9001
Awọn ẹya pataki:Giga giga, idurosinsin-ini
Iṣakojọpọ:Standard okeere packing
1060 Aluminiomu bankanje
1. Awọn abuda ohun elo ati Ipo Imọ-ẹrọ
1060 bankanje aluminiomu jẹ bankanje aluminiomu mimọ-giga pẹlu akoonu alumini orukọ ti ko kere ju 99.60%. Ni awọn ohun elo imọ-ẹrọ ti o wulo, alloy yii ko ṣe apẹrẹ lati ṣaṣeyọri agbara nipasẹ awọn eroja alloying. Dipo, o da lori matrix aluminiomu mimọ-giga lati pese ihuwasi elongation iduroṣinṣin, asọtẹlẹ sẹsẹ išẹ, ati ki o gbẹkẹle gbona ati ina elekitiriki.
Lati irisi yiyan awọn ohun elo, 1060 bankanje aluminiomu ni igbagbogbo gba bi ohun elo ipilẹ iṣẹ kuku ju alloy igbekalẹ. Iye imọ-ẹrọ akọkọ rẹ wa ni fọọmu ti o dara julọ ni awọn wiwọn tinrin, kekere ipele-si-ipele iyatọ ini, ati iṣẹ ṣiṣe deede labẹ igba pipẹ, awọn ipo ipese ti o ga julọ.
2. Standard Export Specifications ati Ipilẹ Data
2.1 Kemikali Tiwqn Iṣakoso (wt.%)
| Ida | Al | Fe | Ati | Ku | Mn | Mg | Zn | Awọn miiran |
|---|---|---|---|---|---|---|---|---|
| Idiwọn | ≥99.60 | ≤0.35 | ≤0.25 | ≤0.05 | ≤0.03 | ≤0.03 | ≤0.05 | ≤0.03 |
Akiyesi: Fe ati Si jẹ awọn eroja aimọ ti ko yẹ. Akoonu wọn ni ipa taara lori iṣẹ ṣiṣe elongation ati didara dada ati pe o gbọdọ wa ni iṣakoso ni wiwọ lakoko sisẹ oke.
2.2 Aṣoju Oke Ipese Ibiti
| Nkan | Ẹyọkan | Ibiti o wọpọ | Awọn akiyesi |
|---|---|---|---|
| Sisanra | μm | 6 – 300 | Lati ultra-tinrin bankanje si awọn iwọn ile-iṣẹ |
| Ìbú | mm | 5 – 1800 | Slitting wa fun ibere |
| ID mojuto | mm | 76 / 152 / 300 | International boṣewa ohun kohun |
| Òṣuwọn Coil | kg | 300 – 1200 | Da lori iwọn ati sisanra |
| Dada Ipari | - | Imọlẹ / Matte | Pinnu nipa ik sẹsẹ |
| Ibinu | - | O / H14 / H18 | Ti yan nipasẹ ohun elo |
3. Engineering-Da Classification ti 1060 Aluminiomu bankanje
Ni lilo gangan, 1060 Aluminiomu bankanje ti wa ni siwaju sii fe ni classified nipa ohun elo ati processing ipa ọna kuku ju nipa alloy yiyan nikan. Awọn ẹka ti o wọpọ pẹlu:
- Apoti ati idena-ite aluminiomu bankanje
- Ise-iṣẹ aluminiomu bankanje
- Itanna ati itanna aluminiomu bankanje
- Ile idabobo ati reflective eto bankanje
- Sobusitireti bankanje fun eroja ohun elo
Ipinsi yii ṣe deede ni pẹkipẹki pẹlu ọgbọn yiyan imọ-ẹrọ isalẹ ati iranlọwọ ṣe idanimọ awọn afihan iṣẹ ṣiṣe to ṣe pataki.
4. Awọn paramita Imọ-ẹrọ bọtini nipasẹ Ẹka Ohun elo
4.1 Iṣakojọpọ ati Awọn ohun elo Idankan duro
| Paramita | Ẹyọkan | Iye aṣoju | Imọ-ẹrọ Idojukọ |
|---|---|---|---|
| Sisanra | μm | 6 – 25 | Iwontunwonsi laarin idena ati irọrun |
| Agbara fifẹ | MPa | 60 – 90 | Iduroṣinṣin ninu apoti iyara to gaju |
| Ilọsiwaju | % | ≥12 | Ti ndagba ikore |
| Pinhole ite | - | ≤ Kilasi A | Gaasi ati oru idankan iṣẹ |
4.2 Awọn ohun elo Iṣẹ-iṣẹ Iṣẹ
| Paramita | Ẹyọkan | Sakani | Isapejuwe |
|---|---|---|---|
| Sisanra | μm | 30 – 300 | Idaabobo ati atilẹyin iṣẹ |
| Agbara fifẹ | MPa | 70 – 110 | Awọn ibeere igbesi aye iṣẹ |
| Alategun | I-Ẹka | ≤20 | Lamination ati didara imora |
4.3 Itanna ati Itanna Awọn ohun elo
| Paramita | Ẹyọkan | Ibeere | Imọ Pataki |
|---|---|---|---|
| Itanna itanna | %Iacs | ≥60 | Itanna aitasera |
| Dada Roughness | μm | ≤0.5 | Igbẹkẹle ifaramọ |
| Ifarada sisanra | μm | ± 3% | Ṣiṣe deedee |
5. Itumọ Imọ-ẹrọ ti Iṣe Ohun elo
Awọn anfani iṣẹ ti 1060 bankanje aluminiomu ko ni yo lati alloy okun ise sise, ṣugbọn lati awọn abuda inu ti aluminiomu mimọ-giga, pẹlu:
- Idurosinsin elongation ihuwasi ni tinrin won, atehinwa ewu sẹsẹ ati slitting dojuijako
- Imudara igbona deede ati itanna fun awọn ohun elo iṣẹ
- Adayeba Ibiyi ti a ipon aluminiomu ohun elo afẹfẹ Layer, n pese idena ipata to dara ni ọpọlọpọ awọn agbegbe
- Ihuwasi ohun elo asọtẹlẹ ti o dara fun iṣelọpọ idiwon ati awọn eto ipese igba pipẹ
6. Awọn agbegbe Ohun elo Aṣoju
- Ounje ati elegbogi apoti idankan fẹlẹfẹlẹ
- Awọn agbara, schomagnetic asching, ati conductive irinše
- Ile idabobo ati reflective awọn ọna šiše
- Idabobo ile-iṣẹ ati awọn ohun elo aabo
- Awọn ipele agbedemeji ni awọn ẹya idapọpọ pupọ
7. Ṣiṣejade ati Iṣakoso Didara ni Eco Alum Co., Ltd
Eco Alem Co., Ltd amọja ni iṣelọpọ titobi nla ati okeere ti awọn ọja bankanje aluminiomu. Awọn ile-nṣiṣẹ ohun ese ẹrọ ilana ibora ti simẹnti, ti n gbona yiyi, tutu sẹsẹ, konge sẹsẹ, yiya, ati annealing. Fun 1060 aluminiomu bankanje, Ifarabalẹ pataki ni a fun ni iduroṣinṣin ti akopọ kemikali, sisanra uniformity, ati dada didara lati pade okeere-ite ohun elo awọn ibeere.
8. Awọn eekaderi ati Awọn ipo Ifijiṣẹ
- Isunmọ si awọn ebute oko okeere pataki jẹ ki ikojọpọ eiyan daradara
- Apoti okeere boṣewa pẹlu ọrinrin ati aabo titẹ
- Atilẹyin fun awọn gbigbe FCL ati LCL
- Imọmọ pẹlu awọn ofin iṣowo kariaye ati iwe
9. Ifiwera Imọ-ẹrọ pẹlu Awọn ohun-ọṣọ Aluminiomu miiran ti o wọpọ
| Alloy | Ipele mimọ | Agbara | Fọọmu | Awọn ohun elo aṣoju |
|---|---|---|---|---|
| 1060 | O ga pupọ | Laarin | O tayọ | Iṣakojọpọ, itanna |
| 1100 | Giga | Lọ silẹ | O dara | Apoti gbogbogbo |
| 3003 | Laarin | Ti o ga | Aiburu | Ẹrọ sise, ohun elo |
| 5052 | Kere | Giga | Iwọntunwọnsi | Awọn ẹya ile-iṣẹ |
10. Awọn ọran Ipese Aṣoju
Ọran 1: Ultra-tinrin 1060 Aluminiomu Fọọmu fun Iṣakojọpọ Ounjẹ
Sisanra: 12 μm. Pese ni iwọn didun si Guusu ila oorun Asia. Ipele pinhole iṣakoso ati elongation ṣe iranlọwọ lati dinku awọn oṣuwọn ikuna iṣakojọpọ.
Ọran 2: Conductive Aluminiomu bankanje fun Electronics
Awọn atunṣe ilana ni a ṣe lati pade iṣiṣẹ ati awọn ibeere dada. Ọja naa kọja ijẹrisi alabara inu ati tẹ ipese iduroṣinṣin sii.
11. Awọn ibeere Imọ-ẹrọ Nigbagbogbo ti a beere
Q: Jẹ 1060 aluminiomu bankanje o dara fun fifuye-rù tabi igbekale ohun elo?
A: Kọ. Fun awọn ohun elo to nilo darí agbara, alloys bi 3003 tabi 5052 ti wa ni niyanju.
Q: Bawo ni o yẹ O ibinu ati ibinu H yan?
A: Iwọ ibinu jẹ ayanfẹ fun dida ati lamination. A yan ibinu H nibiti o nilo iduroṣinṣin onisẹpo.
Q: Le 1060 aluminiomu bankanje ṣee lo fun siwaju bo tabi lamination?
A: Bẹẹni, o le ṣee lo bi sobusitireti fun sisẹ akojọpọ, koko ọrọ si ìmúdájú ti kan pato ilana awọn ipo.
