8079 Eyin Temper 0.0075mm Laminated bankanje

I. ọja Akopọ

8079 Eyin Temper 0.0075mm Laminated bankanjejẹ bankanje aluminiomu laminated olekenka-tinrin ti a ṣe apẹrẹ fun awọn ohun elo pipe-giga. O daapọ awọn superior iṣẹ ti 8079 aluminiomu alloy pẹlu awọn iwọn ni irọrun waye nipasẹ O-temper annealing.

II. Sobusitireti mojuto & Ilana Analysis

2.1 Sobusitireti mojuto: Awọn abuda ti 8079 Aluminiomu Alloy

• Ọja alloy:Jẹ ti 8xxx jara aluminiomu alloy. Awọn mojuto paati ni aluminiomu (iwontunwonsi), ti o ni awọn 0.7%-1.3% irin, ≤0.10% ohun alumọni, ati wa kakiri oye akojo ti Ejò, manganese, sinkii, ati be be lo. Ẹya ipilẹ rẹ jẹ irin-giga, iṣelọpọ ohun alumọni kekere [6].
• Core Abuda:Ti kii ṣe majele, olfato, ounje ailewu ite. N ni ductility ti o dara julọ, inira, ati idena-ini. Dada jẹ mimọ ati rọrun lati laminate. Sooro si awọn iwọn otutu giga ati kekere (-60° C si 260 ° C), o dara fun olekenka-tinrin sẹsẹ ati lamination processing [6].
• Afiwera pẹlu Iru Alloys (f.eks., 8011):Nfunni agbara giga ati lile, dayato jin-yiya išẹ, ati ki o lagbara puncture resistance. Apẹrẹ fun ti o ga-eletan konge lamination awọn oju iṣẹlẹ.

2.2 Ibinu bọtini: O ibinu (Ipinle Annealed) Alaye

• Itumọ ibinu:Itọju annealed ni kikun lati ṣaṣeyọri ipo rirọ ti ohun elo naa, pẹlu o tayọ ṣiṣu, ga elongation, ati imukuro wahala processing.
• Ipa lori Ọja:Ṣe idaniloju agbara ilana fun sipesifikesonu 0.0075mm ultra-tinrin, pese kika ti o dara julọ ati awọn agbara ṣiṣe lati baamu awọn apẹrẹ eka. Tun mu iduroṣinṣin alemora pọ si lakoko lamination ati ṣe idiwọ delamination interlayer.

2.3 Ilana mojuto: Lamination ilana alaye

• Lamination Ilana:Iṣakojọpọ 8079 Eyin-temper aluminiomu bankanje (0.0075mm) pẹlu awọn ohun elo iṣẹ bi PET, Pee, kraft iwe, ati be be lo., nipasẹ gbona imora, oolẹ, tabi epo-free gbẹ lamination lakọkọ.
• Awọn ibeere Ilana bọtini:Dada bankanje aluminiomu n gba itọju elekitirosita, pẹlu dada ẹdọfu ≥38 dyn/cm; iṣakoso iwọn otutu apapo (120-200° C) ati titẹ (0.5-2MPa).
• Awọn anfani ilana:Darapọ awọn ohun-ini idena ti bankanje aluminiomu pẹlu iṣẹ ṣiṣe ti awọn ohun elo akojọpọ, ṣiṣẹda kan ti adani “aluminiomu bankanje + Layer iṣẹ” idena eto.

2.4 Sisanra Abuda: Core Anfani ti 0.0075mm (7.5μm)

• Ipo Sisanra:Ṣubu laarin ẹka bankanje aluminiomu tinrin (4.5-9μm), nini “alaihan ni wiwo” abuda.
• Awọn anfani pataki:Iwọn iwuwo, o tayọ ni irọrun, rọrun lati ge ati dagba, nigba ti mimu superior idankan iṣẹ.

III. Core Performance Ifi

3.1 Ipilẹ Physical Properties

• Sisanra:0.0075mm ± ifarada (asefara), pẹlu ga sisanra uniformity.
• Ifarahan:Mọ, ilẹ alapin, ofe lati epo, pi pinholes, ati scratches.
• Darí Properties:Agbara fifẹ 90-110 MPa, igbelage 13%-18%, Iye owo ti Erichsen 6.2-7.3 mm.

3.2 Mojuto Iṣẹ-ṣiṣe

• Idankan Performance:Oṣuwọn gbigbe atẹgun <0.01 g / m² / ọjọ, idena-pipe pipe.
• Iṣẹ ṣiṣe lanation:Agbara asopọ interlayer giga, ko si delamination.
• Atako otutu:O wa ni iduroṣinṣin ni sakani lati -73°C si 371°C.
• Processing Performance:Rọrun lati ge, Punch, ati ooru asiwaju; ni ibamu pẹlu ga-iyara gbóògì ila.

3.3 Aabo ati Ayika Performance

• Aabo Performance:Ti kii ṣe majele, olfato, ni ibamu pẹlu awọn iṣedede mimọ fun ounjẹ ati apoti elegbogi.
• Ayika Performance:Aluminiomu bankanje jẹ atunlo, pade awọn ibeere iṣelọpọ alawọ ewe ati kekere-erogba.

Iv. Awọn aaye Ohun elo

4.1 Iṣakojọpọ Ipari-giga

• Apoti ounje:Iṣakojọpọ igbale tinrin, Ere ipanu akojọpọ apoti, aroma-toju apoti fun powdered onjẹ.
• Abugbe elefin:Iṣakojọpọ roro fọọmu tutu, agunmi / tabulẹti apoti.

4.2 Awọn ẹrọ itanna & Agbara Tuntun

• Iṣakojọpọ Batiri Litiumu:Sobusitireti inu fun awọn apo batiri litiumu rọ (aluminiomu-ṣiṣu film).
• Itanna paati Idaabobo:Layer Idaabobo fun awọn paati itanna kekere ati awọn PCBs.

4.3 konge Industrial Fields

• Konge Irinse Packaging:Apoti aabo fun awọn ohun elo deede ati awọn sensọ.
• Awọn ohun elo miiran:Ohun elo ipilẹ teepu ti o ga julọ, olekenka-tinrin idabobo Layer sobusitireti, o dara fun awọn oju iṣẹlẹ aerospace.

V. Awọn pato ọja & adani Awọn iṣẹ

5.1 Standard pato

(Sipesifikesonu Table Iduro)

5.2 adani Awọn iṣẹ

• Isọdi sipesifikesonu:Fine-yiyi ti sisanra ifarada, isọdi ti iwọn / ipari.
• Isọdi Lamination:Ṣe akanṣe awọn ohun elo akojọpọ ati awọn fẹlẹfẹlẹ iṣẹ.
• Isọdi Itọju Dada:Titẹ sita, awọn itọju ti a bo.

VI. Awọn anfani Ọja & Oja Idije

6.1 Awọn anfani Ọja mojuto

• Ohun elo Anfani:Irin giga, kekere-ohun alumọni 8079 alloy nfun superior toughness ati puncture resistance.
• Anfani Ibinu:O-temper annealing yanju aaye irora ti fifọ irọrun ni bankanje-tinrin.
• Anfani ilana:Lamination konge ṣe aṣeyọri awọn ibi-afẹde meji ti “iṣẹ + tinrin.”
• Anfani sipesifikesonu:Sipesifikesonu 0.0075mm kun aafo ọja onakan fun bankanje-tinrin ultra-opin giga.

6.2 Oja Idije

• Niche gaba:Fojusi lori olekenka-tinrin, ga-konge laminated bankanje oja.
• Anfani Didara:Iṣakoso to muna lori iṣọkan sisanra ṣe idaniloju didara iduroṣinṣin.
• Anfani isọdi:Atunṣe paramita rọ lati ba awọn oju iṣẹlẹ oriṣiriṣi mu.

VII. Alaye nipa ile-iṣẹ Henan Huawei Aluminum Co., Ltd.

7.1 Ifihan ile ibi ise

Henan Huawei Aluminum Industry Co., Ltd., Ltd. ti a ti jinna npe ni aluminiomu alloy jin processing aaye fun opolopo odun, fojusi lori ga-opin bankanje aluminiomu ati ọja ẹrọ, pẹlu imọ-ẹrọ ti o jinlẹ ati iriri ninu bankanje tinrin ati laminated.

7.2 Agbara mojuto & Agbara iṣelọpọ

• Ohun elo Agbara:Ti ni ipese pẹlu awọn laini iṣelọpọ ti ile ati ti kariaye fun yiyi-tinrin gangan ati lamination.
• Imọ Agbara:Ọjọgbọn R&D egbe muna adhering si ile ise awọn ajohunše.
• Iṣakoso didara:Eto iṣakoso didara ilana ni kikun n ṣe idaniloju didara ọja iduroṣinṣin.

7.3 Ipari Iṣowo & Market Ìfilélẹ

• Awọn ọja mojuto:Pẹlu 8079, 8011, ati awọn miiran 8-jara aluminiomu alloy foils, pẹlu 8079 O-temper olekenka-tinrin laminated bankanje jije a flagship ọja.
• Oja Agbegbe:Orisun ni China, sìn agbaye, pẹlu kan to lagbara brand image.

7.4 Ẹgbẹ Ile-iṣẹ pẹlu Ọja yii

Ọja yii jẹ ọkan ninu awọn ọja flagship mojuto Henan Huawei Aluminiomu, mimu imọ-ẹrọ imọ-jinlẹ jinlẹ ti ile-iṣẹ ni 8079 alloy processing lati rii daju ni kikun ibamu pẹlu awọn ajohunše iṣẹ.

VIII. Ibi ipamọ & Awọn iṣọra Lilo

8.1 Awọn ibeere ipamọ

• Ayika:Fipamọ ni ibi gbigbẹ, fentilesonu, itura ibi, yago fun ọriniinitutu ati awọn iwọn otutu giga.
• Ọna:Itaja yipo nâa lati yago fun funmorawon ati ikolu.
• Igbesi aye selifu:​ 12 osu labẹ boṣewa ipamọ awọn ipo.

8.2 Awọn iṣọra Lilo

• Iṣaayan:Agbara iṣakoso lati yago fun nina ju; iṣakoso ooru lilẹ otutu.
• Awọn oju iṣẹlẹ elo:Yago fun awọn agbegbe acid/alkali ti o lagbara; ni ibamu pẹlu awọn ajohunše imototo.

IX. Awọn ibeere nigbagbogbo

• Q: Interlayer delamination waye.
  • A:Mu awọn paramita lamination pọ si ki o mu itọju dada sobusitireti pọ si.
• Q: Pinholes tabi scratches han lori bankanje dada.
  • A:Mu aabo iṣelọpọ lagbara ati ilọsiwaju pipe ẹrọ.
• Q: Bankanje fi opin si awọn iṣọrọ nigba processing.
  • A:Ṣe idaniloju imunadoko ibinu O-temper ki o ṣatunṣe agbara sisẹ.
• Q: Idena išẹ jẹ substandard.
  • A:Ṣayẹwo iṣotitọ igbekalẹ lamination ati mu ilana akojọpọ pọ si.