Quality Control Standards for 0.02mm Pharma Aluminum Foil: Ensuring Zero Pinholes
In pharmaceutical blistering, ang 0.02mm (20 mikron) PTP Aluminum Foil serves as the critical “lidstock.” Its primary function is to provide a 100% barrier against environmental factors. At this thickness, the greatest technical challenge is the elimination of pinholes—microscopic voids that occur during the foil rolling process.
Our manufacturing process adheres to ISO 15378 (Primary packaging materials for medicinal products) to ensure that every square meter of foil provides a hermetic seal.
1. Material Composition & Grade
The foundation of “Zero Pinhole” quality starts with the selection of high-purity aluminum ingots. We utilize specialized medicinal-grade alloys to ensure the foil is both strong enough for high-speed lines and brittle enough for easy push-through.
| Feature | Specification Details | Industrial Purpose |
| Alloy Type | Aluminyo 8011 / 1235 | High tensile strength and flexibility |
| Temper | H18 (Hard) | Ensures clean fracture for tablet dispensing |
| Tapos na sa ibabaw | One side bright, one side dull | Optimizes printing (bright) & sealing (dull) |
| Core Material | $99\%+$ Pure Aluminum | Maximum barrier against light and moisture |
2. Multi-Layer Structure & Coating Grammage
0.02mm Pharma Foil is a composite material. The precision of the chemical coatings (OP and VC) is just as vital as the aluminum itself.
| Layer Name | Material Type | Coating Weight (g/m2) | Functional Role |
| Protective Layer (OP) | Nitrocellulose/Acrylic | $1.0 \pm 0.5$ | Paglaban sa init & print protection |
| Barrier Layer (AL) | Aluminum Foil | $54.0 \pm 2.0$ | Liwanag, gas, and moisture barrier |
| Bonding Layer | Primer (Optional) | $0.5 \pm 0.2$ | Enhances adhesion between AL and VC |
| Heat Seal Layer (VC) | Vinyl Chloride Resin | $4.0 – 6.0$ | Fusion bonding with PVC/PVDC |
3. Rigorous Pinhole Control Standards
Google ranks technical content higher when it provides specific industry benchmarks. According to YBB00152002-2015, the pinhole requirements for 20um foil are strict:
| Pinhole Diameter | Industry Standard (Max) | Our Factory Standard |
| $> 0.3 \text{mm}$ | Not Allowed | Zero |
| $0.1\text{mm} – 0.3\text{mm}$ | $\le 1 \text{ per } m^2$ | $\le 0.5 \text{ per } m^2$ |
| $< 0.1\text{mm}$ | Regarded as microscopic | Detected & Logged |
Technical Note: We employ Online Infrared Pinhole Detectors on our slitting machines. If a pinhole exceeding $0.1\text{mm}$ is detected, the system marks the edge of the roll for removal, ensuring that only “Clean Grade” foil reaches your blister line.
4. Physical & Mechanical Performance Metrics
Beyond pinholes, the foil must perform flawlessly on high-speed blister machines (e.g., Uhlmann, Romaco, or IMA).
| Performance Test | Unit | Standard Value | Testing Method |
| Lakas ng Paghatak | $Mpa$ | $\ge 160$ | ASTM E8 |
| Pagpapahaba | $\%$ | $\ge 1.0$ | GB/T 228 |
| Heat Seal Strength | $N/15\text{mm}$ | $\ge 7.0$ | $155^\circ\text{C}, 2\text{s}, 0.2\text{Mpa}$ |
| Heat Resistance | Scale | No peeling at $200^\circ\text{C}$ | OP Layer Integrity Test |
| Solvent Residue | $mg/m^2$ | $\le 10$ | Gas Chromatography (GC) |
5. Advanced Quality Assurance (QA) Workflow
Our QA process is divided into three stages to prevent any defective material from being exported.
-
Stage 1: Raw Material Inspection – Spectral analysis of aluminum ingots for chemical purity.
-
Stage 2: In-Process Monitoring – Continuous thickness gauging using Beta-ray sensors (maintaining $\pm 3\%$ tolerance).
-
Stage 3: Finished Product Lab – Every batch undergoes the following:
-
Wettability Test: Using Dyne pens to ensure the surface tension is $> 32$ mN/m for perfect ink adhesion.
-
Microbial Testing: Total yeast and mold count (TYMC) and total aerobic microbial count (TAMC) to ensure GMP compliance.
-
Odour Test: Sensory evaluation to confirm no residual solvents (essential for patient safety).
-
6. Packaging & Storage Specifications for Export
To maintain the “Zero Pinhole” status during sea freight, we use premium protective packaging.
| Packaging Component | Material Used | Purpose |
| Inner Core | Aluminum or Steel (76mm/152mm) | Prevents core collapse during transit |
| Barrier ng kahalumigmigan | PE Film + Silica Gel Desiccant | Prevents oxidation and “white rust” |
| Side Support | Plastic Brackets / Suspended Endboards | Avoids pressure on the foil roll surface |
| Outer Box | ISPM-15 Fumigated Wooden Crate | Global shipping compliance & impact protection |
Ready to Upgrade Your Pharmaceutical Packaging?
Ang aming 0.02mm Pharma Aluminum Foil is the result of decades of metallurgical expertise. We provide a full Certificate of Analysis (COA) at Technical Data Sheet (TDS) with every sample.
-
Custom Printing: Up to 8 colors with anti-counterfeiting UV inks.
-
Free Samples: 20m – 50m sample rolls available for machine trial runs.
-
Compliance: FDA DMF registered and SFDA approved.