Aluminom foil maka akpa - Alloy, Iwe, Ọkpụrụkpụ & Formability
Akpa aluminom foil na-eji ọtụtụ ebe na nri nkwakọ, ngwa nri, n'ichepụta nri-akwadebe, na azụmahịa ime ahịrị n'ihi na ya ahụkebe formability, ihe mgbochi Njirimara, na edo ọkpụrụkpụ akara.
Ịghọta Ọrụ Nhọrọ Alloy
Nhọrọ nke alloy na-ekpebi ike, elongation, nguzogide pinhole, na arụmọrụ miri emi. Na ụlọ ọrụ akpa, 3003, 3004, 8011, na 8006 bụ ndị kasị alloys n'ihi na ha na-edobe magburu onwe n'ibu nkwụsi ike mgbe stamping na mmiri.
Okpokoro 1. Ntụle nke Alloys nkịtị maka ngwa akpa
| Ngwongwo / Alloy | 3003 | 3004 | 8011 | 8006 |
|---|---|---|---|---|
| Ike a na-ahụkarị | Keusoro | Keelu | Keusoro | Keelu |
| Ogologo oge (Formability) | Magburu onwe | Ọ dị mma | Ọ dị ezigbo mma | Magburu onwe |
| Okpomọkụ-eguzogide nkwụsi ike | Ọ dị ezigbo mma | Magburu onwe | Ọ dị mma | Ọ dị ezigbo mma |
| Mmasị maka Deep-Draw | Okwukwe | Okwukwe | Na-agafeghị oke | Okwukwe |
| Nguzogide corrosion | Keelu | Keelu | Dị elu | Keelu |
Nkọwa:
- 3003/8006 dị mma maka mgbagwoju anya akpa shapes n'ihi elu elongation.
- 3004 na-arụ ọrụ kacha mma maka thicker, trays ụlọ ọrụ dị elu.
- 8011 dabara adaba maka igbe mkpofu nwere ọnụ ahịa.
Nhọrọ iwe ọkụ na uru nhazi ha
A na-ebutekarị foil aluminom maka arịa O, H22, na H24 tempers:
- Isi iwe: Anneed nke ọma, kacha elongation maka omimi-ese
- H22/H24: Agbasie ike n'otu akụkụ, ike dị elu maka igbe na-emighị emi na mkpuchi
Gịnị mere iwe ji dị mkpa:
Usoro stampụ na-ebute oke nsogbu. Ọ bụrụ na iwe dị oke ike, foil nwere ike ịgbawa; dịkwa nro, na udi nwere ike daa n'okpuru ibu.
Oke oke na ngwa dakọtara
Okpokoro 2. Nhọrọ Ọkpụrụkpụ a na-ahụkarị maka ụdị akpa dị iche iche
| Ụdị akpa | Akwadoro ịdị arọ | Ihe kpatara ya |
|---|---|---|
| Igbe nri ezinụlọ | 0.035-0.055 mm | Ọ dị mfe akpụ & dị nro |
| Akpa nri ụgbọ elu | 0.055-0.090 mm | Na-eguzogide ikpo ọkụ & iga |
| Ụlọ ihe eji eme achịcha ụlọ ọrụ | 0.090-0.120 mm | Nnukwu isi ike & ikpo ọkụ |
| Igbe nnyefe ewepụrụ | 0.060-0.080 mm | Ntụle nke ọnụ ahịa na ike |
| Akpa nri anụ ụlọ | 0.070-0.100 mm | Na-achọ nkwụsi ike dị omimi |
Formability: Isi ihe nrụpụta akpa
Ndị na-emepụta akpa na-achọ foil nke nwere ike idi:
- Multi-nzọụkwụ miri emi-eru
- curling ihu
- Ribbing na embossing
- High-speed stamping (ruo 200-350 trays / min)
Isi ihe na-emetụta formability:
- Ihe mejupụtara alloy (Mn na-ewusi ike na 3003 na-abawanye uru)
- Ịdị oke iwe
- Ọdịdị ọka homogeneity
- Ịdị ọcha n'elu
- Njikwa pinhole
Usoro ọka otu otu na-eme ka o doo anya na foil na-agbatị nke ọma n'oge a na-akpụ akpụ na-adọkasịghị ya.
Ihe Nlereanya n'ezie n'ụwa: Igbe nri ụgbọ elu dị omimi
Otu ụlọ ọrụ na-eri nri ụgbọ elu dị n'etiti nha chọrọ a 0.08 mm miri-adọta igbe nri ụgbọ elu ike iguzogide ma:
- -40°C nchekwa oyi kpọnwụrụ
- 250Celsius C na-emegharị okirikiri
A họọrọ ngwọta kacha mma dị ka:
- Alloy: 3003
- Iwe: O
- Ọkpụrụkpụ: 0.08 mm
- Lubrianication: Ìhè-mmanụ maka elu-ọsọ akpụ
Akpa ikpeazụ enwetara a 12% mbelata ọnụ ọgụgụ mgbawa na 18% mma akpụ agbanwe agbanwe ma e jiri ya tụnyere nke mbụ ha 8011 H24 foil.
Eco alum co., Ltd – Igwe nkwụsi ike dị elu maka ndị na-emepụta ihe
Eco alum co., Ltd bụ otu n'ime ndị na-eweta ngwaahịa ama ama ọkachamara na akpa-ọkwa aluminom foil. Na nlezianya akara nke cycles annealing, elu ịdị ọcha, na Pinhole, ụlọ ọrụ ahụ eguzobewo mmekọrịta dị ogologo oge na ụlọ ọrụ akpa na North America, Iroopu, na Ndịda Ebe Ọwụwa Anyanwụ Eshia.
Esemokwu ikpe na-aga nke ọma
Otu onye na-emepụta ihe mkpofu na Europe chere ọnụ ọgụgụ ajụ dị elu chere (fọrọ nke nta ka ọ bụrụ 6%) n'ihi na-ekwekọghị ekwekọ elongation in 8011 foil sitere na ndị na-ebubata ya na mbụ. Mgbe ịgbanwee gaa Eco alum co., Foil nke 3003-O Ltd, ọnụego jụrụ ajụ ada n'okpuru 1%, na onye ahịa gbasaa ahịrị mmepụta ya site na iji otu nkọwapụta.
Nkwekọrịta nke nha ọka na ihe eji arụ ọrụ nyere aka ozugbo na nrụpụta ka mma, na-akwado nkwụsi ike nke usoro Eco Alum.
Njikwa Dị Mma: Ihe ndị na-azụ ahịa kwesịrị ịlele
Mgbe a na-enyocha Aluminium foil, ndị na-azụ ahịa kwesịrị ilekwasị anya na:
- Ike ọdụdọ & elongation data
- Nkwenye ịdị arọ (± 3-5%)
- Ọgụgụ pinhole kwa m²
- Ọkwa mmanụ elu & ịdị ọcha
- Ịdị n'otu
- Ogologo ogologo maka ahịrị stamping
Ogo foil na-ekpebi ozugbo akpa na-akpụ ọsọ na ọnụego ntụpọ.
Ajuju ajuju (FAQ)
1. Kedu ihe alloy kacha mma maka imepụta akpa miri emi?
3003 na 8006 bụ n'ozuzu kasị mma n'ihi na ha elu elongation na ike formability.
2. Kedu ọkpụrụkpụ a na-ejikarị eme ihe maka akpa ụlọ?
Ọtụtụ ngwungwu ụlọ na-eji 0.035-0.055 mm, dabere na isi ike chọrọ.
3. Enwere ike iji arịa aluminom mee ihe maka friza na ịsa mmiri?
Okwukwe. All isi akpa alloys (3003/3004/8011/8006) nwere ike idi -40°C ruo 250°C okpomọkụ.
4. Gịnị mere ụfọdụ foils na-agbawa mgbe a na-akpụ?
Ihe na-akpatakarị gụnyere mgbakasị ahụ nke ọma, elongation na-adịghị mma, oke isi ike, ma ọ bụ usoro ọka na-ekwekọghị ekwekọ.
5. Ọ na-emetụta mmanụ elu?
Okwukwe. Achọrọ mmanu mmanu maka ya stampụ ọsọ ọsọ, ebe oke mmanụ dị elu nwere ike imetụta nnabata kọntaktị nri.
Mmechi
Ịhọrọ nke ziri ezi Aluminium foil na-agụnye itule alloy, obioku, and thickness according to application requirements. Nkọwa ziri ezi na-eme ka nkwụsi ike guzosie ike, stamping arụmọrụ, na arụmọrụ njedebe-eji. Ndị na-eweta ntụkwasị obi dịka Eco alum co., Ltd hụ na-agbanwe agbanwe n'ibu Njirimara na elu àgwà, na-enyere ndị na-emepụta aka ịnọgide na-enwe mmepụta dị elu na ọnụ ọgụgụ ntụpọ dị ala.