1100 Aluminium Sheet for Sale: Grades, Magnitudines et emptor scriptor Guide
1100 Aluminium Sheet for Sale: Grades, Magnitudines et emptor scriptor Guide
Introductio
1100 aluminum sheet is one of the most practical commercially pure aluminum plates you can buy: with a minimum 99.0% aluminum content and a small copper addition, it is slightly stronger than 1050/1060 while keeping excellent formability, corrosio resistentia, weldability and thermal conductivity.
It is the default sheet for chemical equipment, cookware and deep-drawn parts, calor, signs and general fabrication that do not need high strength.
Offered factory-direct, 1100 sheet can be supplied in standard 4×8 ft and metric sizes or cut to your dimensions, with the temper and surface finish the product needs.
This guide covers the composition, proprietatibus, sizes and weights, applications, fabricatio, quomodo comparat? 1050, 1060 et 3003, et quomodo iubes.
Quid est? 1100 Aluminium Sheet?
1100 is a non-heat-treatable 1xxx-series alloy strengthened only by cold work and softened by annealing. Sheet generally runs about 0.2–6 mm thick (thicker material is plate), supplied flat or cut to length. Propria eius commoda sunt:
- Optimum ductilis curvi, terunt, spheara et alta drawing, praesertim in O ingenium.
- Very good atmospheric and chemical corrosion resistance from the self-healing oxide film.
- Paulo altius quam viribus 1050/1060 thanks to a controlled 0.05–0.20% copper addition.
- High thermal and electrical conductivity, plus excellent weldability and easy machining.
- lux (de " 2.71 g/cm³), rust-free and lower cost than alloyed grades; anodizes to a good film.
- The trade-off is modest strength; load-bearing or wear parts should use 3003, 5052 or * 6061.
Chemical Compositio et Mechanica Properties
Chemiae regitur (per ASTM B209 / GB/T 3190) keeps silicon plus iron and copper within tight limits so forming, welding and corrosion performance stay high:
| Elementum | Al | And + Fe | Cu | Mn | Zn |
| 1100 | ≥99.0 | ≤0.95 | 0.05-0.20 | ≤0.05 | ≤0.10 |
Mechanical properties change with temper, ut idem 1100 linteum suppleri potest molle et penitus attractum vel durum et rigidum (typical Rm values):
| Ingenium | Tensile (MPa) | Character |
| O* (annaeus) | proxime. 75-110 | mollissimum quidque; alta drawing, nere, maxime forma |
| H12 / H22 | proxime. 95–125 | Quarta-durum; lucem formatam |
| H14 / H24 | proxime. 110-150 | Dimidium-durum; common general-purpose temper |
| H16 / H26 | proxime. 135–170 | Tres-quartus-difficile; rigidiores tabulas |
| H18 | proxime. 150-200 | Plena dura; rigidum, stricto formatam |
Values pariter variant crassitudine et vexillum; confirm tensile and yield on the mill certificate for your gauge.
The small copper addition is what distinguishes 1100 in service.
It gives a modest but useful gain in strength without sacrificing the pure-aluminum forming that lets the sheet be drawn into deep pots and liners, and the metal still anodizes into a uniform, protective film used on trim and nameplates.
1100 thus occupies a deliberate middle ground—not as soft and conductive as 1060, but not as alloyed as 3003, which is why it appears so often in cookware, chemical and general-purpose stock.
Standard Sizes, Superficies et pondus
1100 sheet est produci de 0.2 to 6 mm (laminam to 200 mm+ ad petitionem), in latitudines usque ad roughly 2600 mm et longitudines to 12,000 mm. Common sizes include 4×8 ft (1219×2438), 10002000, 12202440, 1250×2500 and 1500×3000, plus custom blanks to drawing.
| Superficies / metam | Typical usus |
| Mill consummavi (optional PVC/PVDF protective film) | General sheet, fabricationis stirpe, cladding |
| Peniculus / speculum | Tabulae decorativae, namplates, lucendi |
| Anodized / color-coated | Chemical and outdoor panels, durable signage, incido |
| Caelatum / circles | Insulation, anti-slip, cookware discs and deep-drawn parts |
Weight is easy at 2.71 g/cm³: kg per m = crassitudine (mm) × 2.71; a 4×8 ft sheet covers about 2.972 m².
| Crassitudo | KG / M² | Pondus per 4/8 sheet |
| 0.5 mm | 1.36 | proxime. 4.0 kg |
| 1.0 mm | 2.71 | proxime. 8.1 kg |
| 1.5 mm | 4.07 | proxime. 12.1 kg |
| 2.0 mm | 5.42 | proxime. 16.1 kg |
| 3.0 mm | 8.13 | proxime. 24.2 kg |
Typical applications
- Processus chemica apparatu, repono obterere, vasa, pipes and fittings that need corrosion resistance and weldability.
- CREPULCUS, cooking utensils and deep-drawn or spun parts, plus aluminum circles for pots and pans.
- Calor desidit, lucerna reflectors, utrem cap stirpe, printing plates and food packaging components.
- Signa, nameplates and decorative or anodized architectural trim, and general stamped or bent parts.
Fabrication and Surface Treatment
1100 cuts, shears, bends and forms readily and can be laser, plasma or water-jet cut, impressit, spun and drilled; it welds cleanly by common processes and takes anodizing, percutientium, polishing and coating well.
Use O temper for the deepest draws and harder tempers where the finished part must hold shape; generous bend radii and clean, oil-free surfaces help on high-speed lines.
1100 nobis 1050, 1060 et 3003
| Gradus | Min. Al / alloying | Fortitudo | Optimus fit |
| 1050 | 99.50% Al | Humilis | Most economical general sheet and cladding |
| 1060 | 99.60% Al | Humilis | Best conductivity/reflectivity; signs and electrical parts |
| 1100 | 99.00% Al, parum Cu * | Medium low- | paulo plus; formatio, LIBELLUS, chemica, CREPULCUS |
| 3003 | Al + Mn (de " 1.2%) | Medium | De 20% fortior; floors, tread, tougher cladding |
Elige 1100 when you need a little more strength and weldability than 1050/1060 with the same pure-aluminum forming and corrosion; step usque ad * 3003 for real added strength.
Qualitas Imperium, Pricing and How to Order
QC covers thickness and flatness, latitudo / longitudo et diametro tolerantia, surface quality and tensile/yield by temper and chemistry on the MTC; ISO 9001 mills support SGS/BV inspection.
Sheet is interleaved with protective film and packed on pallets or in cases with moisture-proof wrapping for export. Pricing aluminium sequitur basis plus processus feodi, with thinner/wider gauge, consuetudo sectionis, superficies curatio et parva quantitates addendo sumptus;
compare per ton and per finished blank on identical specs under FOB/CFR/CIF (vulgo 30% deposit, statera iusta contra libellum onerandi). Ut utar, mitte stannum / ingenium (1100), crassitudine, sheet aut blank dimensiones, superficies, quantitas, applicationem ac destination portum.
Verify new material on production-gauge samples rather than photos: run the sheet through your forming, welding or cutting line at normal speed, metiretur crassitudine per latitudinem, inspect the surface and, for food or chemical use, confirm the compliance paperwork matches the lot.
A signed pre-production sample then becomes the receiving standard, and an integrated mill that rolls and finishes in-house will hold that standard more reliably across repeat orders than spot resellers.
Frequenter Interrogata Quaestiones
Q: Quid est? 1100 Aluminium sheet propter?
A: Chemical tanks, vessels and piping, cookware and deep-drawn parts, calor, signa, bottle cap and printing stock, and general fabrication needing formability and corrosion rather than high strength.
Q: Quam fortis est 1100 comparari cum 1060 et 3003?
A: It is slightly stronger than 1050/1060 due to a small copper addition, sed 3003 (manganese) is about 20% fortior; H18 1100 reaches roughly 150–200 MPa tensile.
Q: Quod ingenium debeo?
A: O for deep drawing and spinning, H14/H24 for general sheet, H16/H26 for stiffer panels and H18 for the most rigid plate with little forming.
Q: What sizes and thicknesses are available?
A: About 0.2–6 mm sheet in widths to roughly 2600 mm, comprehendo 4/8 ft et metrica signa, with plate and cut-to-size blanks on request.
Q: Can it be welded, anodized and cut to size?
A: Yes—1100 welds cleanly, anodizes and finishes well, and can be laser or sawn cut, bent and supplied as custom blanks with protective film.
Q: Quanti enim 4/8 sheet ponderis?
A: fere 8.1 kg at 1 mm, 12.1 kg at 1.5 mm, 16.1 kg at 2 mm and * 24.2 kg at 3 mm, uti kg / m = crassitudine (mm) × 2.71 super " 2.972 m².
conclusio
1100 aluminum sheet is the slightly stronger, easy-to-fabricate pure-aluminum plate for chemical equipment, CREPULCUS, heat transfer and signs.
Specificare ingenium quomodo tabula processit, fix crassitudine et Conscidisti magnitudine, choose the surface, et emere in molendini libellorum, tolerances et probata exempla quam pretium solum.
