1235 Aluminum Sheet Supplier: Fool, Thin Coil and Buyer’s Guide
1235 Aluminum Sheet Supplier: Fool, Thin Coil and Buyer’s Guide
Gogoldhig
Buyers searching for a 1235 aluminum sheet supplier are usually sourcing thin, high-purity aluminum in coil for converters—cable shielding, adhesive tape, foil batteri, bottle caps and flexible packaging.
One point should be clear up front: in commercial production 1235 is supplied almost entirely as aluminum foil and thin-gauge coil, roughly 0.006–0.2 mm thick, rather than as thick flat sheet.
As a rolling mill and supplier, we provide 1235-O/H18 foil and thin-gauge coil slit to width, with the certificates and export service converters need, and we also supply the true flat sheet grades (1050/1060/1100) when a thicker plate is required.
This guide clarifies the product, tilmaamo, codsiyada, supplier capabilities and how to order.
What Is Aluminum 1235?
1235 is a commercially pure 1xxx-series aluminum with a minimum 99.35% maadada aluminium, strengthened by cold work and softened by annealing.
It is valued for ductility, iska caabin daxalka, good surface quality and economy, which makes it a standard converter foil. Its controlled chemistry (typical ASTM limits) yahay:
| Cunsurka | Al | Iyo + Fe | Cu | Mn | Zn | ee |
| 1235 | ≥99.35 | ≤0.65 | ≤0.05 | ≤0.05 | ≤0.10 | ≤0.06 |
Purity matters for every converter process that follows.
A clean, low-impurity foil rolls to a thin gauge with fewer pinholes, coats and laminates more evenly, oo ilaalisa dusha dhalaalaysa ee cajaladaha iyo alaabtu ku tiirsan yihiin; Qaybaha birta ah ama silikoonku waxay muujinayaan sida cilladaha dahaadhka ka dib ama dhibco daciif ah marka bireedku dabacsan yahay.
1235 sidaas darteed waxay ku fadhidaa meel ula kac ah-ka nadiifsan oo ka sii tuujin badan manganese-sida 3xxx Alloys beddelka, haddana lagu soo saaray tiro aad u sarreeya iyo cabbirro ka dhigaya mid ka dhaqaale badan kan ugu sarreeya ee nadiifka ah ama foils elektarooniga ah..
Fool vs Sheet - Waa maxay 1235 Dhab ahaantii waa
Alaabooyinka aluminiumka waxaa lagu kala saaraa dhumuc ahaan, taasina waxay go'aaminaysaa iyo in kale 1235 waa daawaha saxda ah haba yaraatee:
| Foomka | Dhumucda caadiga ah | Alloys-ka caadiga ah |
| Fool | hoos ku saabsan 0.2 mm (duubid) | 1235, 8011, 1060, 1070, 8079 |
| xaashi khafiif ah | qiyaastii 0.2-6 mm | 1050, 1060, 1100, 3003 |
| Saxan | kor ku saabsan 6 mm | 1060, 3003, 5052, 5083, 6061 |
Markaa waa "1235 xaashi"., Ficil ahaan, 1235 bireed ama gariiradda dhuuban ee u dhow 0.2 mm xadka sare. Haddii aad si dhab ah ugu baahan tahay xaashi fidsan xagga sare 0.2 mm, a 1050/1060/1100 xaashidu waa badeecada saxda ah; qeexid 1235 waxaa jiri doona aan loo baahnayn waxaana laga yaabaa inaan la heli karin saxan ahaan.
Tilmaamaha caadiga ah
| Darada | Range for 1235 foil / gariiradda dhuuban |
| xanaaq | O (jilicsan, ugu badan), H18; sidoo kale H22/H24/H26 |
| Dhumucda | qiyaastii 0.006-0.2 mm (qiyaasaha qaar 0.3 mm) |
| Ballaca | qiyaastii 100-1600 mm, u jeexay ballaca beddelka |
| Xudunta | 76 mm (3 gudaha) ama 152 mm (6 gudaha) Aqoonsiga |
| Dusha sare | doob- ama laba-iftiin, qalalan oo aan saliid lahayn |
| Sahayda | duub jumbo ama duubo dhuuban oo jeexan; dhererka si loo dalbado |
Xanaaqa waa in laga doortaa waxa ku dhacaya xaashida xigta. Badi beddelayaashu waxay ku bilowdaan foorno jilicsan sababtoo ah way waafaqsan tahay, laminates oo duuduubo iyada oo aan gu'-dabas lahayn oo ka badbaaday qorista iyo samaynta;
Shabakadda adag ee H18 ayaa la isticmaalaa halka falintii dhammaatay ama gaasaska ay tahay inay ahaato mid adag oo ay iska caabiso qallafsanaanta, iyo xanaaqa H2x dhexdhexaadka ah waxay ka ganacsadaan jilicsanaan yar oo xoog dheeraad ah. Ku habboon xanaaqa iyo tallaabada hoose, halkii aad ka dalban lahayd hal adag shaqo kasta, waxay ka hortagtaa dildilaaca ama laalaabtay xariiqda beddelka.
Codsiyada caadiga ah
-
- Fiilada gaashaanka ka sameysan iyo cajalad AL/PET oo dahaaran oo fiilooyinka iyo elektiroonigga ah.
- Cajalad bireed aluminium ah oo dhejis ah (dahaarka leh by beddelayaasha cajalad) ee HVAC iyo shaabadeynta.
- Fiilada baytari iyo xariijimo khafiif ah oo la xidhiidha baytari, oo lagu daray xaashida capacitor ee cabirrada wanaagsan.
- Koofida dhalada iyo kaydka xidhitaanka, sigaar iyo warqad warqad, iyo lakabyo baakad dabacsan.
Codsi kastaa wuxuu dejiyaa shuruudo xoogaa kala duwan. Fiilada iyo bireedyada gaashaanka ayaa inta badan lagu dhejiyaa PET waana inay ahaadaan kuwo cidhiidhi ah oo ku dheggan cabbirro dhuuban si loo ilaaliyo gaashaanka.; xaashida cajaladdu waxay u baahan tahay nadiif, dry surface so adhesive bonds reliably;
battery and capacitor foil demand tight gauge and a clean surface for coating or etching; and cap or label stock needs low earing and a consistent face for printing.
Calling out these needs by end use lets the supplier select the right gauge and temper rather than treating all 1235 foil as identical.
What a Capable Supplier Provides
- In-house foil rolling and slitting to hold gauge, surface and width across lots.
- Jumbo or narrow slit rolls matched to the converter’s line, with consistent re-supply.
- Custom thickness, ballac ahaan, camal, core and packaging, including private-label options.
- Capacity for multi-ton and container orders as well as trial quantities.
A good supplier also helps you avoid specifying the wrong product. If the application actually needs a flat sheet above 0.2 mm, a stronger manganese or magnesium alloy, or a finer capacitor-grade web, the mill should say so and supply the matching grade rather than simply confirming 1235 for every request.
That guidance is part of the value of buying from the producer, not an added cost.
Tayada, Compliance and Export
Quality control covers thickness across the width, width and length tolerance, tayada dusha sare (no pinholes beyond the agreed limit, no oil or roll marks), and tensile/elongation by temper, with chemistry recorded on the mill test certificate against a heat number.
ISO 9001 mills support SGS/BV inspection; food-contact and packaging gauges can be supplied with the relevant FDA, Dukumentiyada u hoggaansanaanta EU ama GB.
Roodhadhku waa kuwo aan qoyaan lahayn oo lagu soo raray FOB/CFR/CIF, caadi ahaan leh 30% dhigaalka iyo hadhaaga ka dhanka ah biilka rarida.
Sida loo Xaqiijiyo Alaab-qeybiyaha iyo Dalabka
- Ku xaqiiji duubabka alaab-qeybiyaha iyo jeexjeexyada gudaha ee fiidiyoowga khadka iyo cabbirada la soo saaray.
- Codso muunado wax-soo-saarka oo ku mari dahaarkaaga, qalab laminating ama dilid.
- Ku dhig MTC iyo dukumentiyada u hoggaansanaanta muunada iyo bartilmaameedka.
- Ansixi muunad saxeexan, ka dibna ku dalbo dhumucdiisuna tahay, ballac ahaan, camal, xudunta u ah, tirada iyo meesha loo socdo.
Xaqiijintan waa arrin sababtoo ah foornada waxaa lagu cunaa meelo aad u ballaaran: qulqulo yar oo cabbir ah, dusha sare ama xanaaqu si dhakhso ah ayuu u noqdaa xaddi badan oo wax soo saarka ah oo cilladaysan.
Warshada guriga dhexdiisa ah ayaa ka talisa inta ka soo wareegaysa dildilaaca, Markaa ku celi dalabaadka waxay u dhigmaan muunadda la ansixiyay iyo shahaadooyinka, halka iibiye soo saaraya gariiradaha bar ee kala duwan ma dammaanad qaadi karo isla shabakad.
Running production-gauge samples at normal speed and approving a signed standard is therefore the most reliable protection for ongoing orders.
Su'aalaha badanaa la isweydiiyo
Q: Yahay 1235 supplied as sheet or foil?
A: Commercially 1235 is foil and thin-gauge coil, about 0.006–0.2 mm thick. For true flat sheet above 0.2 mm, isticmaal 1050, 1060 ama 1100; we supply both ranges.
Q: What thicknesses and widths can you supply?
A: About 0.006–0.2 mm (qiyaasaha qaar 0.3 mm) in widths of roughly 100–1600 mm, slit to order on 76 mm ama 152 xudunta mm.
Q: Which tempers are available?
A: O (jilicsan) is most common for converting, with H18 for harder, Shabakad adag iyo H22/H24/H26 ayaa la heli karaa iyadoo ku xiran badeecada.
Q: Waa maxay 1235 foil loo isticmaalo?
A: Cable Difaaca, adhesive tape, baytari iyo foil capacitor, koofiyadaha dhalada, sumadaha, sigaarka iyo kaydka baakadaha dabacsan.
Q: Ma bixisaa shahaadooyin iyo kormeer?
A: Haa — MTC oo leh kiimiko iyo xajin/dheerayn, ISO 9001, Kormeerka SGS/BV iyo dukumentiyada u hoggaansanaanta xiriirka cuntada halka loo baahdo.
Q: Waa maxay MOQ iyo waqtiga hogaanka?
A: Dalabka badan ee tan gaar ahaan waa heer, oo leh tiro tijaabo ah iyo muunado la heli karo; waqtiga hogaaminta wuxuu ku xiran yahay cabbirka, goynta iyo tirada.
Gabagabo
A 1235 Iibiyaha xaashida aluminium runtii waa alaab-qeybiye bireed iyo caato-dhuuban: 1235 waa daahir, bireed beddele ductile for cable, galool, baytari, caps and packaging, not a thick plate.
Confirm the thickness you need, use true sheet grades above 0.2 mm, and source from an in-house rolling mill that provides certificates, slit widths, consistent lots and reliable export.
