Caado 1060 Xaashida aluminium: Grades, Xanaaqa, Sizes and Buyer’s Guide
Caado 1060 Xaashida aluminium: Grades, Xanaaqa, Sizes and Buyer’s Guide
Gogoldhig
Caado 1060 aluminum sheet is one of the most widely ordered commercially pure aluminum plates in the world.
As a 1xxx-series grade with a minimum 99.60% aluminum content, 1060 combines excellent formability, iska caabin daxalka, electrical and thermal conductivity and weldability with a low, stable price
—which makes it the default choice for signage, building cladding, insulation jacketing, lamp reflectors, kulaylka, stamping and deep-drawn parts that do not need high strength.
Ordering it as a “custom” product means fixing the temper, dhumuc weyni, sheet size, surface finish and cut dimensions to your product rather than accepting stock plate.
This short guide covers the composition and mechanical properties of 1060, how to choose the temper, standard sizes and weights, codsiyada caadiga ah, how it compares with 1050, 1100 iyo 3003, and what to specify when ordering factory-direct.
Waa maxay 1060 Xaashida aluminium?
1060 is a non-heat-treatable commercially pure aluminum; it is strengthened only by cold working and softened by annealing. Sheet generally runs from about 0.2 ku 6 mm qaro weyn (thicker material is classed as plate), supplied flat or in cut-to-length panels. Its characteristic advantages are:
- Excellent ductility for bending, soo-qaadid, spinning and deep drawing, especially in the O temper.
- Very good atmospheric corrosion resistance from the natural oxide film, ideal for outdoor signage and insulation jacketing.
- High electrical and thermal conductivity, suited to busbars, battery connectors, reflectors and heat-spreading parts.
- Excellent weldability and easy machining, cutting and anodizing.
- Cufnaanta hoose (ku saabsan 2.71 g/cm³) for light, rust-free panels, at a lower cost than alloyed grades.
- The trade-off is low mechanical strength; load-bearing or high-wear parts should use 3003, 5052 ama 6061 beddel kara.
Composition and Mechanical Properties
The controlled chemistry (ee GB/T 3190, culeys %) keeps iron and silicon low so conductivity and corrosion resistance stay high:
| Cunsurka | Al | Iyo | Fe | Cu | Mn | Mg | Zn | ee |
| 1060 | ≥99.60 | ≤0.25 | ≤0.35 | ≤0.05 | ≤0.03 | ≤0.03 | ≤0.05 | ≤0.03 |
Mechanical properties change sharply with temper, so the same 1060 sheet can be supplied soft and deep-drawable or hard and rigid:
| xanaaq | Awooda TSensile (MPa) | Doogis | Dabeecad |
| O (la tirtiray) | qiyaasaa. 60-100 | 25-40% | Ugu jilicsan; sawir qoto dheer, wareejin, qaabaynta ugu badan |
| H12 / H22 | qiyaasaa. 75–115 | 10–20% | Quarter-hard; light forming |
| H14 / H24 | qiyaasaa. 95–135 | 6-15% | Kala badh adag; the common general-purpose and sign temper |
| H16 / H26 | qiyaasaa. 120-160 | 3-10% | Three-quarter-hard; stiffer panels |
| H18 | qiyaasaa. 160–190 | 2-8% | Si buuxda u adag; rigid, limited forming |
Values vary slightly with thickness and standard; always confirm the tensile and yield range on the mill certificate for your gauge.
Standard Sizes, Surfaces and Weight
1060 sheet is produced from about 0.2 ku 6 mm (plate to 200 mm+ on request), in widths up to roughly 2600 mm and lengths to 12,000 mm. Common stock and cut sizes include 4×8 ft (1219×2438 mm), 4×10 ft, 1000×2000, 1220×2440, 1250×2500 and 1500×3000 mm, plus fully custom blanks cut to your drawing.
| Dusha sare / dhammayn | Isticmaalka caadiga ah |
| Dhagax (with optional PVC/PVDF protective film) | General sheet, xidhxidhay, fabrication stock |
| Caday / hairline or mirror-polished | Decorative panels, Tusaalooyinka magac, Iftiimin |
| Anodized or color-coated (PVDF/PE) | Curtain wall, saqaf, durable outdoor signage |
| Embossed stucco / five-bar tread | Insulation jacketing, anti-slip and decorative sheet |
Weight is easy to calculate at a density of 2.71 g/cm³: kg per m² = thickness (mm) Gelinta 2.71. A 4×8 ft sheet covers about 2.972 m².
| Dhumucda | kg / m² | Weight per 4×8 sheet |
| 0.5 mm | 1.36 | qiyaasaa. 4.0 kg |
| 1.0 mm | 2.71 | qiyaasaa. 8.1 kg |
| 1.5 mm | 4.07 | qiyaasaa. 12.1 kg |
| 2.0 mm | 5.42 | qiyaasaa. 16.1 kg |
| 3.0 mm | 8.13 | qiyaasaa. 24.2 kg |
Codsiyada caadiga ah
- Saxiix, calaamadaha waddooyinka, nameplates and advertising boards – usually H14/H18 sheet that prints, anodizes and vinyl-mounts cleanly.
- Building curtain wall, saqaf, ceiling and decorative panels, often anodized or color-coated.
- Anti-corrosion insulation jacketing (aluminum cladding) for pipes, tanks and ducting, frequently stucco-embossed and in H14/H16.
- Lamp reflectors, lighting parts, heat sinks and radiator components, plus battery flexible connectors and conductive parts.
- Kariye, lamp shells and deep-drawn or spun parts in soft O temper, plus general stamping, foorarsiga iyo laysarka-goynta bannaan.
1060 vs 1050, 1100 iyo 3003
| Heer u qaybin | Min. Al / alloying | Xoog | Ku habboonaanta ugu fiican |
| 1050 | 99.50% Al | Hooseeya | Xaashida guud ee ugu dhaqaalaha badan, gogosha iyo dahaarka |
| 1060 | 99.60% Al | Hooseeya | Calaamadaha, qaybo qaban iyo milicsi; conductivity ka wanaagsan yahay 1050 |
| 1100 | 99.00% Al, wax yar Cu | Dhexdhexaad hoose | Xoogaa ka xoog badan; samaynrid, alxanka, Qalabka kiimikada, kariye |
| 3003 | Al + Mn (ku saabsan 1.2%) | Heer dhexe ah | Ku saabsan 20% xoog badan, u fiican sagxadaha, saxan lagu tumanayo iyo xidhid adag |
Dooraasho 1060 marka daahirnimo, heer sare, milicsiga ama hogaaminta qiimaha iyo xoogga muhiim maaha; tilaabo ilaa 1100 xoogaa xoog iyo weldability ah, iyo ku 3003 (ama 5052/6061) u qaadidda, abrasion ama waajib qaabdhismeed.
Ikhtiyaarada gaarka ah, Xakamaynta Tayada iyo Dalabka
Caado 1060 order can specify temper (O, H12/H14/H16/H18 or H22/H24/H26), thickness and tolerance, sheet or blank dimensions, edge type (slit or sawn), dusha sare, protective film, anodizing/coating color, embossing and packaging. Fabrication services often include laser, plasma or water-jet cutting, wareegsan, punching, drilling and CNC blanks made to drawing.
Quality control covers thickness and flatness, width/length and diagonal tolerance, tayada dusha sare (xagtin ma leh, wasakh, oil or roll marks on critical faces), tensile properties by temper and alloy chemistry on the mill test certificate;
ISO 9001 mills support SGS/BV/TUV inspection. Sheets are normally interleaved with protective film, packed on wooden pallets or in wooden cases with moisture-proof wrapping for export.
Pricing follows the aluminum ingot base plus a processing fee, with thinner or wider gauge, custom cutting, surface treatment and small quantities adding cost; compare suppliers per ton and per finished blank on identical temper, eeg, size and finish, under FOB/CFR/CIF terms (caadi ahaan 30% deposit with balance against the bill of lading).
Su'aalaha badanaa la isweydiiyo
Q: What is custom 1060 Xaashida aluminium loo isticmaalo?
A: Calaamadaha iyo magacyada magac, building cladding and roofing, pipe/tank insulation jacketing, door-qorid, kulaylka, conductive parts, cookware and stamped, spun or deep-drawn components that need formability and corrosion resistance rather than high strength.
Q: What temper should I choose?
A: Use O for deep drawing and spinning, H14/H24 for general sheet and signage, H16/H26 for stiffer panels and H18 for the flattest, most rigid sheet with little forming.
Q: What thicknesses and sizes are available?
A: Common sheet runs 0.2–6 mm in widths up to about 2600 mm, including 4×8 ft and metric standards, with plate and fully custom cut-to-size blanks on request.
Q: How much does a 4×8 sheet weigh?
A: Qiyaas ahaansho 8.1 kg at 1 mm, 12.1 kg at 1.5 mm, 16.1 kg at 2 mm iyo 24.2 kg at 3 mm, using kg/m² = thickness (mm) Gelinta 2.71 kor 2.972 m².
Q: 1060 vs 3003 sheet – which do I need?
A: 1060 for economy, conductivity and corrosion resistance in light-duty work; 3003 when you need about 20% more strength for floors, saxan lagu tumanayo, roofing or tougher formed parts.
Q: Can it be anodized, coated and cut to size?
A: Haa. 1060 anodizes well and can be brushed, mirror-polished, color-coated, embossed and supplied with protective film, plus laser-cut, bent or CNC-fabricated to your drawing.
Gabagabo
Caado 1060 aluminum sheet is the economical, easy-to-fabricate pure-aluminum workhorse for signage, xidhxidhay, dahaarka, reflectors and formed parts.
Specify the temper from how the panel is processed (O for deep forming, H14/H24 for general and sign use, H18 for rigidity), fix thickness and cut size, choose the surface finish, and buy on mill certificates, dimensional tolerances and approved samples rather than price alone.
