Hobaneng indasteri ea boenjiniere e lumellana le eona 5052 Aluminium foil bakeng sa lits'ebetso tsa matla a phahameng
1: Kenyelletso
Boenjiniere ba mehleng ea kajeno le tlhahiso, Tlhokahalo ea e bobebe, li-corronion-e thibelang, le lisebelisoa tse hlasimollang tsa 'mele e hola ka potlako. Liindasteri li ka tloha Aerospace, koloi, le metsing, ho ts'ebetso ea lik'hemik'hale, hloka lisebelisoa tse ka khonang e nang le maemo a khatello ea maikutlo a phahameng Ha a ntse a le bobebe le o lekantsoeng. Lisebelisoa tsa setso, e joalo ka tšepe e bonolo, li matla empa li le boima ebile li tloaetse ho tsuba, athe softer allominium aloys fana ka khanyetso ea lijalo le bo-ramaluoa empa haelloa ke matla a lekaneng bakeng sa lits'ebetso tsa sebopeho.
Sena se entse niche bakeng sa 5052 aluminium foil, al-mg e amohelang Matla a mahareng a phahameng haholo, khanyetso e ntle haholo, le ho ntlafatsa motho ea ikhethang, ho e etsa hore e be e loketseng lits'ebetso tsa boenjiniere moo ts'ebetso e bobeli le litšenyehelo li bohlokoa.
Mekhoa ea bohlokoa e khabisitsoeng ke ho amohela 5052 Aluminium Fil e kenyelletsa:
- Litlhoko tse bobebe:
Ho fokotsa boima ba 'mele ho bohlokoa bakeng sa ts'ebetso ea matla le phokotso ea litšenyehelo. 5052 Foil e thusa kaho e bobebe ntle le ho sekisetsa botshepehi. - Khohlano ea Tikoloho e Sehiloeng:
Metsoako ea boenjiniere hangata e sebetsa MAINE, lik'hemik'hale, kapa maemo a phahameng a mongobo. 5052 Foil e hapile ka setofo le sekhothesi sa kakaretso, Ho fana ka bophelo ba mekhahlelo. - Litlhoko tse rarahaneng tsa Geometch:
Lisebelisoa tsa sejoale-joale tsa sejoale-boonds se ka se fetang setšoantšo se tebileng, ho qhekella, ho tsitsipana, le ho khumama Ntle le ho qhekella, eo 5052 Foil e ka amohela ka lebaka la Dunality ea eona e ntle haholo. - Phatlalatso ea bophelo bo botle:
Ntle le litšenyehelo tsa ho iphepha, Ho fana ka nako ea nako e telele le ho sebetsa ka ts'ebetso susumetsa khetho ea boitsebiso. 5052 Aluminium foil e fokotsa litšenyehelo tsena ka ho ikhula le ho hanyetsa. - Ho Tšehetsoa le Ho Sebelisana 'moho le Tsamaiso ea Tsamaiso:
E bobebe, Recyclable, le lisebelisoa tse tšoarellang tse kang 5052 hokahanya le litekanyetso tsa tikoloho le mekhoa e tsitsitseng ea boenjiniere.
Sengoloa se tla hlahloba hore na hobaneng 5052 aluminium foil e fetohile a Lintho tse ratoang bakeng sa lits'ebetso tsa matla a phahameng, sekoaelo:
- Melemo ea thepa le menyetla ea mechaelo
- Melemo ea Boenjiniere le Likhetho tsa kopo
- Mefuta ea Moruo le Bophelo
- Ho bapisoa le lisebelisoa tse ling
- Mekhoa ea nakong e tlang le ntlafatso ho 5052 Lisebelisoa tsa Aluminium
2: Melemo ea thepa ea 5052 Aluminium Foil
2.1 Allow
5052 Aluminium foil ke a Al-MG Lello e nang le:
- Magnesium (2.2-2.8%): E ntlafatsa matla a matla le ho itšireletsa
- Chromium (0.15-0.35%): E tiisa likoti tsa aney, e thibela moqosi oa khale oa khale
- Lintho tse ling (Manganese, Silicone, Tšepe, Koporo) Ka bongata bo fokolang
Sebopeho sena se fana ka a Tekanyo e ikhethileng ea matla a matla, khanyetso ea kutu, le ea tlholeho, e bohlokoa ka ho khetheha ka likopo tse tšesaane.
2.2 Thepa ea Mechini
| Thepa | 5052 | 3003 | 8011 | 6061 | Steel e bonolo |
|---|---|---|---|---|---|
| Matla a tšepe (MPa) | 210-260 | 170-210 | 150-200 | 275-310 | 400-550 |
| Kotulo Matla (MPa) | 130-195 | 100-150 | 100-150 | 240 | 250-350 |
| Emplation (%) | 12-22 | 18-25 | 12-20 | 10-15 | 10-25 |
| Botenya (g/cm³) | 2.68 | 2.73 | 2.7 | 2.7 | 7.85 |
| Khanyetso ea Corrosion | E kgabane | E itekanetseng | E itekanetseng | Phahameng | Tlase |
| Formability | E kgabane | E kgabane | E ntle | LIMITED | Mafutsana |
- Matla a tšepe: Bohareng, E loketse likarolo tse hlokang ho tšoarella ha u le khatello ea maikutlo.
- Emplation: 12-22%, ho lumella setšoantšo se tebileng le ho khumama ntle le ho hlapanya.
- Botenya: 2.68 g/cm³, Ho fana ka melemo e bobebe ea sebopeho.
2.3 Ho futhumala le ho feto-fetoha
| Khalefo | Kotulo Matla (MPa) | Matla a tšepe (MPa) | Emplation (%) | Litšitiso tse tloaelehileng |
|---|---|---|---|---|
| O (E pakiloe) | 130 | 210 | 22 | Likepe tse hulang ka ho tebileng, Ho paka ea elektroniki |
| H32 | 145 | 235 | 18 | Li-casings tsa ts'ireletso, Lishiti tse bobebe tsa sebopeho |
| H34 | 155 | 250 | 16 | Mats'oao a mahareng a mahareng |
| H38 | 195 | 260 | 12 | Likarolo tse phahameng tsa moroallo, Likarolo tsa Matlafatso |
Baenjineri ba ka khetha bohale bona lekanya matla le ho senya Ho latela litlhoko tse ikhethileng tsa ts'ebeliso.
2.4 Melemo ea 'mele le ea futhumatsang
| Thepa | 5052 | 6061 | Tšepe |
|---|---|---|---|
| Botenya (g/cm³) | 2.68 | 2.70 | 7.85 |
| Thermal Conductivity (W/m·K) | 138 | 170 | 50 |
| Boitšoaro ba motlakase (% Iacs) | 35 | 40 | 15 |
| Reflectivity (%) | 70-85 | 60-70 | 10 |
| Khanyetso ea Corrosion | E kgabane | Phahameng | Tlase |
- Boima bo tlase Fokotsa boima ba likarolo tsa motsoako.
- Ho na le Khalefo ea mocheso e loketse lits'ebetso tsa taolo ea mocheso.
- E babatsehang khanyetso ea corrosion netefatsa ts'ebetso ea nako e telele, Leha e le libakeng tse thata.
2.5 Mochine oa ho hanela mochini o hanyetsanang
5052 aluminium foil ha e hapiloe sejalo:
- Aluminium Oxide e sirelletsang
- Magnesium-Enhanced Chloride Harahelo
- Alromium Stililization ho thibela motsamaisi oa khale
Likopo li Thusa: lisebelisoa tsa metsing, Lisebelisoa tsa lik'hemik'hale, li-casus tse sirelletsang bakeng sa elektroniki, le likarolo tsa meralo ea meralo.
2.6 Ho theha le ho ntlafatsa
5052 FOIL Tšehetso:
- Setšoantšo se tebileng: Litanka, Likepe tsa khatello, Lijana tsa Lijo
- Ho chechisa le ho khumama: Libopeho tsa cylindrical le tse rarahaneng
- Ho tsitsa le ho fihla: Multi-Composites
Ho potlakisa ho phahameng ha khatello e phahameng Ts'ebeliso ea litheko tse tšesaane ntle le boitelo, Ho fokotsa boima ba ho fokotsa le litšenyehelo.
2.7 Ho lekanya le ho ikopanya
E tsamaisana le Mig le Tig Welding, Ho Boloka Botšebeletso bo Bonolo ba Post-WAld, e bohlokoa ho eona:
- Likepe tsa khatello
- Mekhoa e Meholo e Ts'oatsang Lipalo
- Liphetoho tsa sebopeho
2.8 Likopo tse futhumetseng le tsa motlakase
- TLHOKOMELISO EA LITLHAKISO Li-Shields tsa Heat, lipakete tsa betri, le lits'ebetso tsa hvac.
- Phetoho ea motlakase e lumella ho silafatsa le ho beha mabaka ka elektroniki.
3: Melemo ea boenjiniere
- Phahameng karo-tekano ea boima ba ho ba boima Fokotsa boima ba motsoako ntle le ts'ebetso ea ho sekisetsa.
- Ho itlhopakisa E nolofalletsa ho phela halelele le ho se sebetse hantle.
- Formability E ts'ehetsa li-geometries tse rarahaneng.
- Weldability e netefatsa botšepehi nakong ea likopano tsa tšebetso.
- Ts'ebetso ea thermal / Motlakase e ts'ehetsa lits'ebetso tse tsoetseng pele tsa boenjiniere.
Khaolo ena e tla kenyelletsa lithuto tse qaqileng tsa lichelete tsa lichelete tsa lisebelisoa tsa 'nete tsa boenjiniere ka bongata, bohale, le tlhahlobo ea ts'ebetso.
4: Litšitiso tse tloaelehileng
4.1 Li-casings tsa ts'ireletso
- Lisebelisoa tsa pele, Liboto tsa Battery, le housrong ea elektroniki
4.2 Armal, Acoustic, le vibrate ea lamute
- Lisebelisoa tsa likoloi le ka ho aha bakeng sa tlhahlobo ea mocheso, molumo oa molumo
4.3 Ho tšoara lik'hemik'hale le mokelikeli
- Liness Lines, piping, li-valve ka ts'ebetso ea lik'hemik'hale
4.4 Mefuta ea metsing le ea Offshore
- Mehala ea Offshore, hous, Litsamaiso tsa Metsi a leoatle
4.5 Lipontšo tsa motlakase
- EMI / RFI SHITEDING, likarolo tse bobebe
Kenyelletsa litafole tse nang le lithuto tse ikhethang, boholo, Boikutlo ba lintho tse bonahalang, le ntlafatso ea ts'ebetso.
5: Tlhahlobo ea moruo le ea bophelo
| Lintho tse bonahalang | Litsenyehelo tsa pele | Ho sebetsa litšenyehelo | Tlhokomelo | Lits'enyehelo tse Felletseng tsa Bophelo |
|---|---|---|---|---|
| 5052 Aluminium Foil | Metsi a mahareng | Tlase | Tlase | Tlase-medium |
| 6061 Aluminium | Phahameng | Metsi a mahareng | Metsi a mahareng | Phahameng |
| Tšepe | Tlase | Phahameng | Phahameng | Bohareng |
| 3003 Aluminium | Metsi a mahareng | Tlase | Metsi a mahareng | Metsi a mahareng |
- Fokotsehile Litsenyehelo tsa bophelo bo felletseng Ka lebaka la ho hanyetsa
- Litsenyehelo tse tlase tsa Tlhahiso le Ts'ebetso Ho latela botsitso ba bonolo
- Melemo ea Tikoloho: e bobebe, Recyclable, le ho tšoarella
6: Papiso ea lintho tse bonahalang le ho khutlisa matla
Ho bapisoa le 3003, 8011, 6061, le tšepe, ho kenyelletsa Li-Matters tsa Doging le Lichate Bakeng sa baenjiniere ho khetha lisebelisoa tse nepahetseng tse thehiloeng ho:
- Matla
- Formability
- Ho itlhopakisa
- Ho sebetsa ka thata
7: Mekhoa ea Bokamoso le boqapi
- Likoloi tse bobebe le likoloi tsa motlakase
- Matla a Lafshore le Metsing a Sesole
- E tsoetseng pele e kentsoeng
- Lisebelisoa tsa Hybrid Aluminium-Polymer
- Ho Tšehetsoa le ho Ngola
8: Qetello
- Ebatsa lebaka leo 5052 Aluminium foil e khethoa
- Totobatsa motsoako oa eona oa matla a phahameng, khanyetso ea kutu, le ea tlholeho
- Hatisa melemo ea nako e telele ea moruo le bophelo
- Morero oa Morero o Tsoelang Pele ho Amoha Likopo tsa Boenjiniere