Lintlha tsa Bohlale tsa Bohlale li hlophisoa ha 8079 Sephutheloana sa Foil Composite sesepa sa boleng bo phahameng ka ho hlahisa mela e phahameng
1. Kenyelletso
Lilemong tsa morao tjena, Mokhoa oa lefatše oa ho fumana thepa e phahameng haholo o eketsehile ka potlako, Haholo-holo ho Phatlalatso ea Phatlalatso, lijo, le indasteri ea elektroniki e phahameng. Liindasteri tsena li hloka lisebelisoa tse fanang ka mekhoa e metle ea litšitiso empa hape le bohloeki bo phahameng, Matla a Matla, le botsitso ba lik'hemik'hale. Har'a lisebelisoa tse fapaneng tse thehiloeng ho aluminium tse fumanehang, The 8079 aluminium foil Packate ea bonolo ea Composite e hlokometse tlhokomelo e kholo bakeng sa ts'ebetso ea eona e phahameng haholo ka ho tiisa heling, Ho Funyesa, le ho hanyetsa khatello ea tikoloho.
Ho fapana le foil ea setso ea aluminium, The 8079 Alloy e entsoe ka ho khetheha likopo tse hlokang bohloeki bo tebileng le ho nepahala. Mehato ea tlhahiso ea bohloeki e phahameng ka nako eo e bohlokoa haholo ho boloka botšepehi ba foil le lik'hemik'hale nakong ea thepa nakong ea lihlahisoa. Pampiri ena e fana ka tlhahlobo e akaretsang ea tekheniki ea ts'ebetso ea tlhahiso, Ho tloha ho ARALY LINAKO TSA HO FIHLA LE HO QETELA LE TLHOKOMELISO EA HO QETELA, Ho tsepamisa maikutlo ho litekanyetso tsa bohlokoa, Etsa Opmimization, le litsamaiso tsa taolo ea boleng ba ho fihlela bohloeki bo holimo le ho se lumellane.
2. Litsero tsa lintho tse bonahalang tsa 8079 Aluminium Alloy
2.1 Alloy composition le likarolo tsa tšepe
The 8079 Alloy ke a letoto la Al-FA-Fe-Fen, Ho kopanya matla le ho feto-fetoha le maemo. Metsoako ea eona ea lik'hemik'hale le mesebetsi ea tšepe e akaretsoa ka tlase:
| Element | Litaba (%) | Ts'ebetso |
|---|---|---|
| Al | ≥99.3 | E fana ka khatello ea maikutlo, Ho tsitsa ho hoama ha futhumatsang, le khanyetso ea kutu |
| Fe | 0.6-1.0 | E eketsa matla le ho hanyetsa ho rusolla |
| Le | 0.05-0.3 | Ntlafatsa ho hanyetsa le ho hanyetsa |
| Mong | ≤0.05 | E ntlafatsa ho hanela likhoro le botšepehi ba maemo |
| Cu | ≤0.05 | E matlafatsa pherekano ea khatello ea kutlo |
| Zn | ≤0.10 | E matlafatsa anti-corrosion le ho khanya |
Tekanyo e ntlafalitsoeng ea tšepe le silicon ho 8079 Alloyy o netefatsa phetiso ea lijo-thollo, Litsela tse betere, le ts'ebetso e ntle haholo nakong ea ho bata le ho rala.
2.2 Thepa ea 'mele le ea mochini
8079 Aluminium Foil o bonts'a motsoako oa matla a phahameng a phahameng, equoppal elong e itseng, le tšebetso e phahameng ea mojari:
- Matla a tšepe: ≥100 mpa
- Emplation: ≥2.0%
- Sekhahla sa phepelo ea metsi: ≤0.01 g / m ea²
- Sekhahla sa phepelo ea oksijene: ≤0.1 cm³ / m ea²
- Boleladi tsa oli ea metsi: ≤30 mg / m²
Mesebetsi ena e etsa 8079 Aluminium Frail Coppesite Package e ntle bakeng sa lipakete tsa pharmatical bluster, Reetort Pushes, le lifilimi tsa mongobo oa motlakase.
3. Moralo oa Tlhahiso-leseling e phahameng
3.1 TLHALOSO EA BOTSOALLE LE HO BONAHALA
Mohala oa tlhahiso ea bohloekisi o arotsoe hore o qhibilihisoa, Ho lahla, rolling, aninealing, lamiting, le libaka tse thellang. Ka 'ngoe le e' ngoe e lokela ho latela litekanyetso tsa iso:
| Sebaka sa ts'ebetso | Sehlopha sa ISO | Sekhahla sa phapanyetsano ea moea | Moeli oa nako (≥0.5μm) | Mocheso | Mongobo |
|---|---|---|---|---|---|
| Ho qhillana | ISO 9 | Linako tsa ≥10 / hora | ≤3 500,000 likarolo / m³ | 25± 2 ° C | 50± 5% |
| Ho lahla & Rolling | ISO 8 | ≥20 Times / hora | ≤350 ≤350 ≤ | 23± 2 ° C | 45± 5% |
| Aninealing & Lamiting | ISO 7 | ≥30 / hora | ≤35,000 dikarong / m³ | 22± 2 ° C | 45± 3% |
| Ho thella & Sephutheloana | ISO 7 | Linako tsa ≥35 / hora | Likarolo tsa ≤20,000 / m³ | 22± 2 ° C | 40± 3% |
Sistimi eohle ea moea e sebelisa filimi e mengata (G4, F7, le Hepa H14) hape e boloka khatello e lulang e le thata ho thibela ho fetisoa ha litšila.
3.2 Taolo ea Tikoloho
- Ho tsilatsila mocheso: ± 2 ° C ho ea libakeng tsa tlhahiso
- Mongobo o lekanang: e bolokiloe lipakeng tsa 40-50%
- Tsela ea moea: Phallo ea laminar e tlase ho fokotsa pokello ea likamore
- Lerata le Taolo ea Vibration: Tlas'a 60 DB le 0.01 MMMPELITITIT
Ho leka-lekanya kamehla ha sensor, differential pressure monitors, and HEPA filters ensures sustained compliance with ISO standards.
3.3 Personnel and Material Flow Management
Personnel must pass through multi-stage air showers and disinfection chambers before entry. Raw materials are vacuum-sealed and opened only in buffer zones equipped with negative pressure exhausts. The Sistimi ea Phethahatso ea Tlhahiso (MES) tracks every operation, including operator ID, nomoro ea batch, and real-time cleanliness data.
4. Melting and Casting Technology
4.1 Controlled Melting
The purity of molten aluminum determines the cleanliness of the final foil.
- Melting temperature: 740–760°C
- Degassing method: online rotary argon degassing; hydrogen content ≤0.15 mL/100g Al
- Filtration: ceramic foam filters (40–60 PPI) to remove inclusions
- Stirring: Elecbrateic e hlohlelletsang ho thibela tšilafalo ea mochini
4.2 Ho lelekisa
Leseli la mohloa le qhoebetsoeng li-slabs tse 6-8 li sebelisa li-caster tsa mafahla:
- Lebelo la casting: 900± 50 mm / s
- Tsoa ka mocheso: 580-620 ° C
- Bokhabane (RA): ≤0.3 μm
- Lubricuse oli ea oli: ≤ 40 μm
Sistimi ea metsi e pholileng e sebetsa ka loop e koetsoeng, Ho boloka moralo o ka tlase 2 μs / cm ho tlosa litšila tsa ionic.
5. Ho bata ho bata ebile ho khabisa
5.1 Mekhahlelo e mengata ea likarolo tse ngata
Li-slabs tsa qubu li bata li panya ka 4-5 ho feta ho fihlela bothaba ba ho qetela ba 7-15 μm. Phokotso e 'ngoe le e' ngoe ea Pass e lekantsoe ho 35% Ho qoba ho eketsa lijo-thollo tse ngata. Ts'ebetso e sebelisoa Taolo e ikemetseng ea lekanya (Agc) le Taolo ea sepharatiki e ikemetseng (Afc) litsamaiso tsa ho boloka ho mameloa ke ho hlakola ho ± 2 μm.
5.2 Vacuum annealing
Ho kopanya ho ntlafatsa ho senya khatello ea maikutlo le bohloeki:
- Mocheso: 320-380 ° C
- Nako: 6-12 lihora tse ngata
- Boemo ba phomolo: ≤1 × 10⁻³ pa
Ts'ebetso ena e tlosa masala a oli le ho imolla khatello ea maikutlo. Liphooko tse hlahisoang li bonts'a khanya e phahameng ea khanya le matla a maholo a ho amana le a kopaneng.
6. Ho hloekisa taolo le taolo e hlakileng
Kamora ho khopisa, Maqhubu a foil a hloekisoa ho hloekisoa ha Sesepa sa UltraSic ho hloekisa ka 45 ° C. Ho nepahala ha lipalesa tsa mokelikeli oa ho hloekisa ke ≤1 μm, 'me hangata ho na le nako ea potoloho e ka tlase ho 24 lihora. Ho thibela ho khahloa ke likhoho, Litsi tsa moea tsa moea li kenngoa ka har'a likarolo tse thellang le tse ntle, Ho boloka bokhoni bo ka tlase 50 V.
Liroto tsohle tse hlakileng tsa foil li ile tsa tiisoa ka hare 24 lihora le ho bolokoa tlasa mocheso o laoloang (<20°C) le mongobo (<40%) Pele u batla.
7. Layeo le theknoloji
7.1 Liparamente tsa USA
The 8079 Aluminium Frail Coppesite Secposite ka tloaelo e tlameletsoe le phoofolo ea lapeng, Pe, kapa lifilimi tsa CPPS li sebelisa likhahla tse ntle tsa polyurethane.
- Koaetsoe ka kotlo: 1.5-2.0 g / m²
- Tepe ea Polelo: 85-95 ° C
- Khatello ea mohala: 15-25 n
- Phekola: 40° C bakeng sa 48 lihora
Romella ka nepo e tiisa ho latela moea o matla, tetenyo e ts'oanang, le ho tsitsipalla ho tsitsipana ha litšitiso.
7.2 Ho thella le ho pheta-pheta
Ho fofa ho hloka ho fepa le ho tšoana le ho tsitsipana.
- Bolelele bo Bonolo: ± 0,3 mm
- Bophahamo ba Burr: <3 μm
- Ho kheloha ha likhohlano ho kheloha: <1.5 N
Kamora ho thella, Mothapo o mong le o mong o tletse ka mekotla ea li-static e nang le khoutu ea dijithale e nang le li-dijithale tsa dijithale bakeng sa ho ts'oaroa ka botlalo.
8. Taolo ea boleng le Tlhahlobo ea Ts'ebetso
Tafole 1. Thepa ea bohlokoa ea 'mele ea 8079 Foil
| Paramethara | Tloaelo | Mokhoa | Tlhaloso |
|---|---|---|---|
| Ho kheloha botenya | ± 2 μm | Laser gauge | Mekhabiso e tšoanang |
| Matla a tšepe | ≥100 mpa | GB / t 228.1-2010 | Botsitso bo hlophisehileng |
| Emplation | ≥2% | Tester ea Tense | Ho Funyesa |
| Bohloeki ka holimo | Lesala la oli < 30 mg / m² | Tlhahlobo e sa tsoakoang | Bohloeki |
| Poholes | ≤0.3 / M² | Mokhoa oa elektrolytic | Phetoho ea Barrier |
Tafole 2. Ts'ebetso ea Laye
| Thepa | Tloaelo | Mokhoa oa liteko |
|---|---|---|
| Matla a Peel | ≥3.0 n / 15 mm | GB / t 8808-2017 |
| Matla a nang le mocheso | ≥25 n / 15 mm | Astm f88 |
| Wvtr | ≤0.01 g / m ea² | ASTM F1249 |
| ORT | ≤0.1 cm³ / m ea² | Asst D3985 |
Tafole 3. Khatiso ea bohloeki
| Paramethara | Maemo a taolo | Khafetsa |
|---|---|---|
| Likaroloana tsa moea | ≤35,000 / m³ | Ka phetoho |
| Ho tsepamisatsoa ha 'mele oa khale | ≤0.2 mg / m³ | Letsatsi le letsatsi |
| Bokaholimo ba lerōle | ≤10 MG / M² | Ka roll |
| Ho teneha ha mochini | ≤0.01 mm | Beke le beke |
| Khatello e fapaneng | 250-300 pa | Tsoela pele |
9. LITLHAKISO TSA BOPROFETA
9.1 Pagectication ea meriana
Ho pharmatical blister packs, The 8079 aluminium foil Pakete ea bonolo e sebetsa e le karolo e phahameng ea ho kuta, Ho sireletsa likokoana-hloko le matlapa ho oxidation le mongobo. E boetse e thusa ho tsitsa lithethefatsi ka har'a setša se atolohileng.
Mohlala oa Case: Moetsi oa libuka oa Europe o tlalehile a 30% Keketseho ea Bophelo Shelf Kamora ho fetola maemo a tloaelehileng 8011 foil le 8079 alloy foil ka sebopeho sa eona sa pvc / al laminate.
9.2 Ho paka lijo
Sebelisoa kofi, chokolete, le mekotla ea lebese ea lebese, 8079 Aluminium Foil e fana ka poloko e ikhethang ea ho boloka menoana le oksijene. Melemo ea eona e tiileng ea mocheso e ntlafatsa botšepehi ba sehlahisoa nakong ea lipalangoang halelele.
9.3 Ts'ireletso ea Motsoako oa Electronic
Tlhahlobo ea FAIV-Staric bokaholimo le ho hanyetsa ho etsa hore e be le liphutheloana tse kopantsoeng, Sensors, le likarolo tsa mahlo. Ha o ne o laloa ka lifilimi tsa polymer tsa polymer, e kopana le litekanyetso tsa ESD (bokantle bo atamelang ≤10⁹ ω).
10. Ea hlahelletseng
10.1 Litsamaiso tsa Tlhahiso-leseling
Ho Ikhethela ho Hlahisoa Ho Hlaha ka Ho Kopana Hape Tlhahlobo ea AI-Driven le Lihlooho tse boletsoeng esale pele:
- Pono ea mochini E bona likokoanyana tse nyane joalo ka li-choholes, Makhethe, kapa litsuonyana tsa oli.
- Mens le arp e netefalitse ho thuisa ka botlalo.
- Taolo ea Phetoho (APC) ka boeona e fetolela Force, mocheso, le lebelo ho ipapisitse le karabo ea nako ea sebele.
10.2 E putsoa le e chitja
Ho kopana le litekanyetso tsa ho hlasimolla lefatšeng ka bophara, Baetsi ba kenya tšebetsong:
- Li-adhers-li-apple tse sa sebetseng tsa li-rast tse sa lefelloeng ho fokotsa maemo a voc;
- Ho futhumatsa oli ea oli hape le lits'ebetso tse nchafatsang;
- Ho hlaphoheloa mocheso mocheso ho tsoa ho light;
- 98% aluminium scrap recycists.
Mekhahlelo ena e fokotsa ho tsoa ha Carbon le ho ntlafatsa ts'ebelisano ea tikoloho kaofela 8079 Aluminium Froil Coil Coppage Lifecycle Lifecycle.
11. Qetello
Ho hlophisoa ha 8079 sephutheloana sa sekhechana sa aluminium Mehala ea tlhahiso ea bohloeki e phahameng e emela ho kenella ha mahlale a thepa ea thepa, Taolo ea Tikoloho, le boenjiniere ba pelehi. Ho tloha ho aloy bohloeki ho ea ho batsamaisi ba lithethefatsi, Mohato o mong le o mong o ama ts'ebetso ea sehlahisoa le ho nahanisise.
Ha 'maraka oa lefatše o ntse o tsoela pele ho tsebisa, E bolokehile, le ho paka ka mokhoa o tsitsitseng, Theknoloji ena e tla bapala karolo e ntseng e eketseha ea mekhabiso ea meriana, polokeho ea lijo, le ts'ireletso ea elektroniki. Tloaelo ho Ho etsa lintho tse bohlale le tse tala netefatsa hore 8079 Aluminium foil e tla lula e le thepa ea sekhutlong se tlang nakong e tlang ea pakete e phahameng haholo