Mefokolo ea Aluminium Foil Surface le Litharollo tsa Tlhahlobo

Aluminium foil holim a hlahloba liphoso ke ts'ebetso ea bohlokoa ea taolo ea boleng e khethollang ts'ebetso ka kotloloho, Tšireletseho, le kamohelo ea mebaraka ea foil ea aluminium e sebelisoang ho paka, Pharmaceutical, le lisebelisoa tsa indasteri. Esita le ho se phethahale ha lintho tse nyenyane haholo ho ka lebisa ho hloleheng ha mokoallo, likoli tsa ho tiisa, kapa litaba tsa ts'ebetso e tlase, ho etsa tlhahlobo e hlophisitsoeng ea bohlokoa bakeng sa bahlahisi ba sejoale-joale ba foil.

1. Hobaneng ha Litšitiso tsa Bokaholimo li le Bohlokoa Tlhahisong ea Aluminium Foil

Aluminium foil hangata e sebelisoa lits'ebetsong moo ho ts'episang botšepehi ba mokoallo, bohloeki, mme ponahalo ya pono e laolwa ka thata. Mefokolo ea bokaholimo ha e ame feela chebahalo empa e ka senya le thepa ea ts'ebetso joalo ka:

• Ts'ebetso ea thibelo ea oksijene le mongobo
• Ho tsitsa ho tiisa mocheso
• Print adhesion le barbotage ho tšoana
• Matla a motjhini nakong ya ho bopa kapa ho mena

Ka liphutheloana tsa meriana le lijo, bofokoli bo ka holimo bo ka baka ka kotloloho ho hopola sehlahisoa kapa ho hloleha ho latela melao.

2. Mefuta e Tloaelehileng ea Mefokolo ea Aluminium Foil Surface

Litšitiso tse ka holim'a metsi li bakoa ke ho thetheha, aninealing, Ho sebetsana le, kapa tshilafatso nakong ya ho sebetsa. Litšitiso tse bonoang hangata li akaretsoa ka tlase.

Tafole 1: Litšitiso tse Tloaelehileng tsa Aluminium Foil Surface le Lisosa tsa tsona

3. Litharollo tsa Tlhahlobo bakeng sa Mefokolo ea Aluminium Foil Surface

Ho netefatsa boleng bo tsitsitseng, litharollo tsa tlhahlobo li tlameha ho kopana ho fumana marang-rang le netefatso offline.

3.1 Litheknoloji tsa Tlhahlobo ea Marang-rang

Foil ea kajeno li-mill li itšetlehile ka mekhoa ea tlhahlobo ea nako ea sebele e kopantsoeng ka ho toba le melapo e kolohang kapa e khutlisetsang morao. Litsamaiso tsena hangata li kenyelletsa:

• Lik'hamera tse nang le maemo a holimo a holimo
• Leseli la LED kapa laser-based
• Li-algorithms tsa ho hlophisa bofokoli ba thuso ea AI

Litsamaiso tsa Marang-rang li lumella liphetoho tsa ts'ebetso hang hang, e fokotsa haholo litekanyo tsa maqeba.

3.2 Mekhoa ea ho Hlahlobisisa Ntle le Marang-rang le ea Lab

Tlhahlobo ea kantle ho marang-rang e ntse e le bohlokoa bakeng sa tlhahlobo ea sesosa le tlhahlobo ea bareki. Mekhoa e tloaelehileng e kenyelletsa:

• microscope ea optical bakeng sa tlhahlobo ea pinhole density
• Tekanyo ea bokhoakhoa ba bokaholimo (RA, Rz)
• Teko ea oli e setseng
• Liteko tsa botšepehi ba ho khomarela le ho koahela

4. Ho Bapisa Mokhoa oa ho Hlahloba

Tafole 2: Papiso ea Mekhoa ea Tlhahlobo ea Aluminium Foil Surface

5. Nyeoe ea indasteri: Eco Alum Co., Ltd

Eco Alum Co., Ltd ke moetsi ea khethehileng oa aluminium ea foil e fanang ka foil ea boemo ba lijo le ea meriana 'marakeng oa machaba.. Lilemong tse 'maloa tse fetileng, k'hamphani e ile ea tobana le litletlebo tsa khafetsa tsa bareki tse amanang le li-pinholes tse nyane tse fumanoeng nakong ea liphutheloana tsa blister.

Tharollo e Kentsoe ke Eco Alum Co., Ltd

• E kentse sistimi e tsoetseng pele ea inthanete ea tlhahlobo ea optical litseleng tse khutlisang morao
• Optimized rolling oli filtration ho fokotsa litšila
• Ho thehiloe menyako ea pinhole density bakeng sa botenya bo fapaneng ba foil

Liphetho li Fihliloe

• Litletlebo tse amanang le Pinhole li fokotsehile 70% nakong ea selemo se le seng
• Sekhahla se ntlafetseng sa kamohelo ho tsoa ho bareki ba meriana
• Setumo se matlafalitsoeng limmarakeng tsa kantle ho naha se hlokang litokomane tsa boleng bo tiileng

Nyeoe ena e bonts'a kamoo lintlafatso tse hlophisitsoeng tsa tlhahlobo li ka fetolelang ka kotloloho melemo ea khoebo e lekantsoeng.

6. Mekhoa e Molemo ka ho Fetisisa ea ho Fokotsa Mefokolo ea Bokaholimo

Ho fokotsa sebopeho sa sekoli, baetsi ba lokela ho tsepamisa maikutlo ho:

• Tlhokomelo ea kamehla ea holim'a moqolo le ho bentša
• Hloekisa tsamaiso ea ho tsamaisa oli
• Lebelo le tsitsitseng la ho bilika le taolo ea tsitsipano
• Annealing e laoloang
• Mekhoa ea tlhahlobo e hlophisitsoeng e tsamaellanang le litlhoko tsa bareki

Ho hlahloba ha hoa lokela ho nkoa e le litšenyehelo, empa e le letsete la thibelo.

7. LIPOTSO TSE BOTSOANG HANGATA (LBH)

Q1: Ke bofokoli bofe bo boholo ka ho fetesisa holim'a foil ea aluminium?
Bofokoli ba Pinhole hangata bo nkuoa bo le bohlokoa haholo hobane bo ama ts'ebetso ea litšitiso ka kotloloho.

Q2: Na mefokolo e ka holimo e ka felisoa ka ho felletseng?
Le hoja ho felisoa ka ho feletseng ke ntho e sa utloahaleng, taolo e nepahetseng ea ts'ebetso le tlhahlobo e ka fokotsa mefokolo ho ea maemong a amohelehang a indasteri.

Q3: E tlameha ho hlahlojoa inthaneteng bakeng sa foil ea meriana?
Boholo ba bareki ba meriana ba rata haholo kapa ba hloka lintlha tsa tlhahlobo ea inthanete e le karolo ea litokomane tsa boleng.

Q4: Ke hangata hakae litsamaiso tsa tlhahlobo ea foil li lokelang ho lekanyetsoa?
Calibration e khothaletsoa likhoeli tse ling le tse ling tse 3-6, ho itšetlehile ka bophahamo ba tlhahiso le litekanyetso tsa bareki.

8. Qetello

E sebetsa hantle tlhahlobo ea liphoso tsa aluminium foil e kopanya theknoloji e tsoetseng pele, taolo ea ts'ebetso e laolehileng, le boiphihlelo bo sebetsang ba indasteri. Ha litlhoko tsa 'maraka li ntse li le thata, baetsi ba tsetelang ho litharollo tse tšepahalang tsa tlhahlobo - joalo ka Eco Alum Co., Ltd-e tla boloka melemo ea tlhōlisano ka boleng, tumellano, le tšepo ea bareki.