3003 Aluminium Sheet Plate
Lekola tataiso e felletseng ho 3003 Sekhahla sa aluminium. Fumana thepa ea eona ea ho fana, Melaoana e tloaelehileng, Malebela a Fabrication, Ke hobaneng ke mosebetsi oa indasteri.
Sebakeng se seholo sa matlo a sa senyehang, 3003 Sekhahla sa aluminium e tšoere boemo bo ikhethang le bo tšoarellang.
Ha se matla ka ho fetisisa, kapa ho hatelloa ka matla ka ho fetisisa, Leha ho le joalo e joalo ka aluminum ea bohlokoa ka ho fetisisa khoebong.
Hangata e bitsoa joalo ka “Workorse” tsa indasteri, Ho nkeloa sebaka sa eona se mabenyane ke Testamente e nang le boemo bo ikhethang ba boemo bo loketseng ba thepa e fanang ka ts'ehetso, Ho fapanyetsana, le boleng ba moruo.
Tataiso ena e fetela pele data ea boemo bo holimo ho u fa botebo, Tlhahisoleseling e Sebetsang e Fumaneheng lilemong tse mashome tsa boiphihlelo ba indasteri.
Re tla hlahloba feela eng 3003 Aluminium ke, Empa Hobaneng e etsa tsela eo e etsang ka eona le Joang Ho hatisa litšobotsi tsa eona bakeng sa sephetho se nepahetseng likopo tsa hau.
Boitsebiso ba Motheo oa 3003 Aluminium
3003 Aluminium ke ea letoto la 3xxx, e nang le likarolo tsa manganese (Mong) e le ntho ea mantlha ea motho.
Ka mantlha, Ke aluminum e hloekileng haholo (ho tloha letoto la 1xxx) e sirelelitsoe ka tlatsetso e sa reng letho 1.2% Manang's. Keketso ena e bonahalang e ntse e eketseha.
Manganese Athomma AMP3 e kopanyang laluminum Crystal latting, mochine o tsejoang ka hore ke Tharollo e tiileng ea Tharollo.
Khokahano ena e senya lifofane tsa atomiki, ho etsa hore ho be thata haholoanyane hore ba thelle ba e fetile ka tlas'a khatello ea maikutlo.
Phello ke thepa eo e batlang e le 20% matla ho feta 1100 (Khokahano e Hloekileng) aluminium, ntle le kotlo e kholo ho motho ea lokelang ho hanyetsa kapa ho hanyetsa.
Ka hare, 3003 Sekhahla sa aluminium ke Mollo o sa lefelloeng ka thata.
Matla a eona a ke ke a ntlafatsoa ke ho futhumatsa le ho tima potoloho.
Sebakeng seo, Ho sebetsana ho bata ho bata ho tloha ho ho roka le ho ba matla - tsela - mokhoa o tsejoang e le oa hardening, e bontšitsoeng ke 'H’ ho sithabetsa.
Ho hlalosa litšobotsi tsa 3003 Aluminium
Senotlolo se 'maloa, Litšobotsi tse tšepahalang li theha motheo oa 3003 Aluminium Sheet Platete ea Aluminium
1. Ho hloka botsitso le ho ntlafatsa
Ena ke letšoao la 3003 aluminium.
E ka khumama habonolo, e tiisitsoe, e huleloa, Spun, le ho thehile ha roll, Ho amohela Meetso e Ratehang e nang le kotsi e nyane ea ho robeha.
- Seo sena se bolelang ho uena:
Tšobotsi ena e fetolela litšenyehelo tse tlase tsa ho boloka lisebelisoa, Liphetoho tse fokotsehileng, le tokoloho e kholo ea tokoloho ea likarolo tse rarahaneng joalo ka cookware e ntle e huloang, Li-panels tse khahlang, kapa ka thata.
Ho ts'oaroa ha eona ho e tšoarela ho ba motsoalle oa bo-'makhato.
2. Khatiso e Ntle haholo ea Cyrosion
3003 letlapa la aluminium e fana ka khanyetso e ntle haholo ho condrosion e tloaelehileng.
E boetse e sebetsa hantle khahlano le lijo tse ngata, lino tse tahang, le lik'hemik'hale tse bonolo tsa liipone.
- Seo sena se bolelang ho uena:
U ka hlakisa ka kholiseho 3003 Bakeng sa lits'ebetso tsa ho qetela tse kang marulelo, ho ipata, le gutters, Le bakeng sa lisebelisoa tsa sehlopha, ntle le tlhoko ea likokoana-hloko tse theko e phahameng tikolohong e mengata ea tikoloho.
3. Ho Teba Hantle
Alloy ena e na le boima bo sebelisang tig e tloaelehileng (Gtaw) le nna (Gawn) Tsamaiso, Ho hlahisa manonyeletso a matla le a molumo.
- Seo sena se bolelang ho uena:
Lesela la likopano tse rarahaneng ke tokiso. Boiketlo ba welding o nolofatsa ho ntlafatsa le ho fokotsa ho rarahana, Ho kenya letsoho ho theko e tlase ea tlhahiso.
4. Matla a leka-lekaneng le a tšepahalang
Ha e sa “Matla a phahameng” Lintho tse bonahalang, Matla a eona a boletsoe esale pele ebile a sa khone ho lekana bakeng sa liprotheelo tse seng tsa sebopeho le tse bobebe.
- Seo sena se bolelang ho uena:
E fana ka ntlafatso e kholo ea ts'ebetso ho feta 1100 Aluminium bakeng sa likopo tse hlokang le ho tsitsa le ho tšoarella, joalo ka metheo ea lisebelisoa, Litanka, le lisebelisoa tsa lik'hemik'hale.
Litlhaloso tsa Bohlale: Lintlha tse ka morao ts'ebetsong
Kutloisiso ea litsebi e hloka ho sheba data e nepahetseng e laolang boitšoaro ba lintho tse bonahalang.
Sebopeho sa lik'hemik'hale (Asst B209)
Taolo e thata ea mantlha ea boleng e le ntho ea 3003 e sa fetoheng.
| Element | Litaba (%) | Karolo le tšusumetso ho 3003 Aluminium |
|---|---|---|
| Manganese (Mong) | 1.0 – 1.5 | Element ea mantlha ea motho. Mokhanni oa bohlokoa oa matla ka tharollo e tiileng. |
| Koporo (Cu) | 0.05 – 0.20 | E fana ka e nyane empa e le matla ho matlafatsa matla. |
| Silicone (Le) | ≤ 0.6 | Ho Hlokahala. E laoloa ho netefatsa thepa e sa fetoheng. |
| Tšepe (Fe) | ≤ 0.7 | Ho Hlokahala. Maemo a phahameng a ka fokotsa ho hasanya ha ho hasa. |
| Zinki (Zn) | ≤ 0.10 | Ho se ruise ho ne ho sa tšoanela maemo a tlase. |
| Aluminium (Al) | Balance | Metal ea Sete, Ho fana ka maikutlo a mantlha le sebopeho se thibelang. |
Mechini ea Mechanical ka bohale
Thepa ea mochini oa 3003 letlapa la aluminium ke ts'ebetso e tobileng ea palo ea mosebetsi o batang (bohale).
| Khalefo | Tlhaloso | Matla a tšepe (MPa, tloaelehileng) | Kotulo Matla (MPa, tloaelehileng) | Ho thatafala (Brinell, Hbw) |
|---|---|---|---|---|
| O | E pakiloe (Bonolo ka botlalo) | 110 | 40 | 28 |
| H12 | Stain-hardned (Quarter Hard) | 125 | 95 | 35 |
| H14 | Stain-hardned (Halofo ea thata) | 140 | 125 | 40 |
| H16 | Stain-hardned (Likarolo tse tharo tse thata) | 165 | 145 | 47 |
| H18 | Stain-hardned (Ka thata) | 185 | 165 | 55 |
| H24 | Stain-hardned & Ka mokhoa o ikhethileng (Halofo ea thata) | 140 | 105 | 41 |
Ho utloisisa h--h--fompers: The “H1” setoro se thata-thata. The “H2” letoto (E.g., H24) e bolela ho tsitsipane-thata ho feta kamoo ho lakatsang ho feta ebe e pakile (e nolofalitsoe) Khutlela Tomper ea ho qetela, e bakang tlhahiso e tlase hanyane ka hanyane e matla haholo empa ho hana ho senya chelete ho feta ha ho na thuso ea hau ea H1..
LITLHAKISO TSA 'Mele
- Botenya: 2.73 g/cm³ (0.0986 lb / in³)
- Mefuta e mengata: 643 – 654 °C (1190 – 1210 °F)
- Thermal Conductivity: ~ 193 w / m · h (E ntle haholo bakeng sa lits'ebetso tsa mocheso tsa mocheso joalo ka radiator le mocheso oa mocheso)
- TLHOKOMELISO E MOLEMO: ~ 3.4 μωω ho 20 ° C. C
- Modulus ea Elasticity: 69 GPA (10,000 ksi)
Lesela le ts'ebetso: Pono ea setsebi
Ho sebetsa ka katleho le 3003 Sekhahla sa aluminium e kenyelletsa ho utloisisa maqhama a lona.
Ho theha le ho khumama
Ka lebaka la khatello ea eona e phahameng, 3003-O hangata e ka inama ka 0T Radius (sose ka boeona) Li-gages tse nyane.
E thata haholo 3003-H14 hloka radius e kholo ea bend (E.g., 1T ho 2t) Ho thibela ho qhekella.
Kamehla nahana ka Funk; Lintho tse ling li tla khutlela sebopeho sa eona sa pele kamora ho ba leboho ho tlosoa, e hloka ho khumama haholo.
Welding
Bakeng sa liphetho tse nepahetseng, sebelisa a 4043 filler rod, e fanang ka phallo e ntle le ho fokotsa ho hlakoloa.
A 1100 filler e ka sebelisoa teng moo ho hasaneng ho phahameng ha ho hlokahala.
Ka hare, The Mocheso o amehang zone (Haz) Haufi le Weld e tla lahleheloa ke litlamorao tse matlafatsang tsa mosebetsi o batang, ho tlohela ka nepo ho bonolo 'O’ bohale.
Phokotso ena ea matla ho Haz e tlameha ho ikarabella ho moralo oa likopano tse nang le mojarong.
Hochinga
Hochinga 3003 aluminium e hloka lebelo le phahameng, Lisebelisoa tse bohale, le lubrication e lekaneng.
Bakeng sa mocheso o solang, Lisebelisoa tse nang le maikutlo a phahameng le li-anggna tse ntlafalitsoeng li khothalletsoa ho thibela “gummy” Lintho tse tsoang ho a haha ka lehlakoreng le sehiloeng.
Ho chesa maikutlo a thata hlahisa li-chips tse hloekisitsoeng le ho qeta ka bophara.
Phekolo ea holimo
- Anodizing:
3003 e ka etsoa habonolo ka mokhoa o ntlafalitsoeng oa ho ntlafatsa le ho khathala.
Leha ho le joalo, Ha se “Boleng ba honotha” (AQ) motsoako. Filimi e hlahisitsoeng endic e tšoarella ebile e sireletsoa empa e tla ba le matte e nyane, Ponahalo e putsoa.
Bakeng sa khanya, hlakisa, kapa ho khabisa mokhanni oa khato, ayloy joalo ka 5005 ke khetho e phahameng. - Comagement Coversion Comating:
Sena ke kalafo e tloaelehileng ebile e sebetsa haholo bakeng sa 3003.
Ho sebelisa chiromate (E.g., Alodine) kapa ho sokoloha ho ferekana ho fana ka khanyetso e ntle ea lijalo tse ngata ebile e sebetsa e le pritatiol e ikhethang bakeng sa pente le phofo e koahelang. - Pente & Phofo ea phofo:
Ka kalafo e nepahetseng (Ho hloekisa le ho fetoloa koae), 3003 e fana ka substrate e ntle haholo bakeng sa mefuta eohle ea liphaephe tsa manyolo.
Likopo tse Tloaelehileng: Moo ts'ebetso e sebetsang le boleng
Thepa e pota-potileng hantle ea 3003 Sekhahla sa aluminium etsa hore e be liindasteri tsa indasteri:
- Moaho & Kaho: Marulelo, ho ipata, gutters, Lishinatha tse ngata, le lipanetereng tsa boqapi.
- Hvac & Phetiso ea mocheso: Lithako tsa mocheso le li-tubes, radiator cores, le ba boholong.
- Lijo & Liindasteri tsa lik'hemik'hale: Cookware, lisebelisoa, Litanka tsa polokelo, piping, le lisebelisoa tsa ts'ebetso.
- Kakaretso ea Tlhahiso: Li-block tse halikiloeng, Libaka tsa lisebelisoa, Fan Blades, ducwork, le ho saena.
Leeto le mang
| Tšobotsi | 3003 Aluminium | 5052 Aluminium | 6061-T6 Aluminium |
|---|---|---|---|
| Matla a mantlha | Moqomo o motle haholo & Boleng | Matla a mabe a phahameng & Ho hanyetsa ha Marine Corros | Karolelano ea ho ba boima ba 'mele (Sebopeho) |
| Matla (Tloaelehileng) | E itekanetseng (140 Mpa bakeng sa H14) | Phahameng (230 Mpa bakeng sa h32) | Phahameng haholo (310 Mpa ea t6) |
| Khanyetso ea Corrosion | Hantle haholo (Atmopparic) | E kgabane (Haholo-holo oli) | E ntle (E ka nolofalletsa ho tlamisa) |
| Weldability | E kgabane | Hantle haholo | E ntle (Ho lahleheloa ke matla a maholo ho Haz) |
| Formability | E kgabane | E ntle | E lokileng (Mafutsana ka bohale ba T6) |
| Nyeoe ea mantlha ea tšebeliso | Tšepe ea tšepe & Ho theha | Marine, Lithake tsa lik'hemik'hale, Likarolo tse phahameng tsa vibration | Liforeimi tsa sebopeho, Likarolo tsa mochini, Lisebelisoa tse phahameng tsa khatello ea maikutlo |
Qetello
3003 Sekhahla sa aluminium ke se fetang feela thepa; Ke mokokotlo oa indasteri e se nang palo.
Tekanyo ea eona e ikhethileng ea matla a lekanyelitsoeng, Ho Hlophisa Botho, Ho hanyetsa ho tsitsipana, le boleng bo botle bo etsa hore e be boitsebiso bo ka tšeptjoang le bo sa fetoheng.
Ka ho utloisisa litšobotsi tsa eona tse khethehileng 'me u e bapise le li-alloys tse ling, U ka khetha ka kholiseho 3003 Aluminium bakeng sa morero oa hau o latelang, ho e tseba ho fana ka ts'ebetso ea provens.
