Adat 1060 Lambaran Aluminium: Grades, Watekna, Sizes and Buyer’s Guide
Adat 1060 Lambaran Aluminium: Grades, Watekna, Sizes and Buyer’s Guide
Bubuka
Adat 1060 aluminum sheet is one of the most widely ordered commercially pure aluminum plates in the world.
As a 1xxx-series grade with a minimum 99.60% aluminum content, 1060 combines excellent formability, lalawanan korosi, electrical and thermal conductivity and weldability with a low, stable price
—which makes it the default choice for signage, building cladding, insulation jacketing, lamp reflectors, Panas, stamping and deep-drawn parts that do not need high strength.
Ordering it as a “custom” product means fixing the temper, ketebalan, sheet size, surface finish and cut dimensions to your product rather than accepting stock plate.
This short guide covers the composition and mechanical properties of 1060, how to choose the temper, standard sizes and weights, aplikasi has, how it compares with 1050, 1100 jeung 3003, and what to specify when ordering factory-direct.
Naon Dupi 1060 Lambaran Aluminium?
1060 is a non-heat-treatable commercially pure aluminum; it is strengthened only by cold working and softened by annealing. Sheet generally runs from about 0.2 ka 6 kandel mm (thicker material is classed as plate), supplied flat or in cut-to-length panels. Its characteristic advantages are:
- Excellent ductility for bending, ceting, spinning and deep drawing, especially in the O temper.
- Very good atmospheric corrosion resistance from the natural oxide film, ideal for outdoor signage and insulation jacketing.
- High electrical and thermal conductivity, suited to busbars, battery connectors, reflectors and heat-spreading parts.
- Excellent weldability and easy machining, cutting and anodizing.
- Kapadetan rendah (kira-kira 2.71 g/cm³) for light, rust-free panels, at a lower cost than alloyed grades.
- The trade-off is low mechanical strength; load-bearing or high-wear parts should use 3003, 5052 atawa 6061 tibatan.
Composition and Mechanical Properties
The controlled chemistry (pikeun GB / T 3190, beurat %) ngajaga beusi sareng silikon rendah sahingga konduktivitas sareng résistansi korosi tetep luhur:
| unsur | Al | Jeung | Fe | Cu | Bungbulang | Mg | Zn | Tina |
| 1060 | ≥99.60 | ≤0.25 | ≤0.35 | ≤0.05 | ≤0.03 | ≤0.03 | ≤0.05 | ≤0.03 |
Sipat mékanis robah sharply kalawan watek, jadi sarua 1060 lambar bisa disadiakeun lemes tur jero-drawable atawa teuas tur kaku:
| Watekna | Kakuatan regangan (MPa) | Elongation | Karakter |
| O (diantared) | pangetan. 60-100 | 25–40% | Panglemesna; gambar jero, puteran, formability maksimum |
| H12 / H22 | pangetan. 75–115 | 10–20% | Saparapat-teuas; cahaya ngabentuk |
| H14 / H24 | pangetan. 95–135 | 6–15% | Satengah teuas; umum-tujuan umum jeung tanda watek |
| H16 / H26 | pangetan. 120–160 | 3–10% | Tilu-saparapat-teuas; panels stiffer |
| H18 | pangetan. 160–190 | 2–8% | Pinuh-teuas; kaku, kawates ngabentuk |
Nilai rada beda-beda sareng ketebalan sareng standar; salawasna mastikeun rentang tensile sarta ngahasilkeun dina sertipikat ngagiling pikeun gauge Anjeun.
Ukuran Standar, Surfaces jeung Beurat
1060 sheet is produced from about 0.2 ka 6 mm (plate to 200 mm+ on request), in widths up to roughly 2600 mm and lengths to 12,000 mm. Common stock and cut sizes include 4×8 ft (1219×2438 mm), 4×10 ft, 1000×2000, 1220×2440, 1250×2500 and 1500×3000 mm, plus fully custom blanks cut to your drawing.
| Beungeut / réngsé | pamakéan has |
| Robih (with optional PVC/PVDF protective film) | General sheet, cloadds, fabrication stock |
| Disikat / hairline or mirror-polished | Decorative panels, kontplatates, cahaya |
| Anodized or color-coated (PVDF/PE) | Curtain wall, gOOHING, durable outdoor signage |
| Embossed stucco / five-bar tread | Insulation jacketing, anti-slip and decorative sheet |
Weight is easy to calculate at a density of 2.71 g/cm³: kg per m² = thickness (mm) × 2.71. A 4×8 ft sheet covers about 2.972 m².
| Kandelna | kg/m² | Weight per 4×8 sheet |
| 0.5 mm | 1.36 | pangetan. 4.0 kg |
| 1.0 mm | 2.71 | pangetan. 8.1 kg |
| 1.5 mm | 4.07 | pangetan. 12.1 kg |
| 2.0 mm | 5.42 | pangetan. 16.1 kg |
| 3.0 mm | 8.13 | pangetan. 24.2 kg |
Aplikasi Hual
- Ditanda, rambu jalan, nameplates and advertising boards – usually H14/H18 sheet that prints, anodizes and vinyl-mounts cleanly.
- Building curtain wall, gOOHING, ceiling and decorative panels, often anodized or color-coated.
- Anti-corrosion insulation jacketing (aluminum cladding) for pipes, tanks and ducting, frequently stucco-embossed and in H14/H16.
- Lamp reflectors, lighting parts, heat sinks and radiator components, plus battery flexible connectors and conductive parts.
- Masak, lamp shells and deep-drawn or spun parts in soft O temper, plus general stamping, bending and laser-cut blanks.
1060 vs 1050, 1100 jeung 3003
| Kelas | A. Al / paduan | Kakuatan | Best fit |
| 1050 | 99.50% Al | Rendah | Most economical general sheet, cladding and insulation |
| 1060 | 99.60% Al | Rendah | Signs, conductive and reflective parts; better conductivity than 1050 |
| 1100 | 99.00% Al, a little Cu | Low-medium | Rada kuat; ngeusian, was, peralatan kimia, masak |
| 3003 | Al + Bungbulang (kira-kira 1.2%) | Sedeng | Kira-kira 20% notuna kuat kuat, better for floors, tread plate and tougher cladding |
Milih 1060 when purity, kondangaan, reflectivity atawa harga ngawujud jeung kakuatan teu kritis; ngaléngkah ka 1100 pikeun kakuatan saeutik leuwih sarta weldability, jeung ka 3003 (atawa 5052/6061) pikeun beban-bearing, abrasion atanapi tugas struktural.
Pilihan custom, Kontrol kualitas sareng Pesenan
Hiji adat 1060 pesenan bisa nangtukeun watek (O, H12 / H14 / H16 / H18 atanapi H22 / H24 / H26), ketebalan jeung toleransi, lambar atawa dimensi kosong, tipe ujung (slit atanapi sawn), finish permukaan, pilem pelindung, anodizing / warna palapis, embossing jeung bungkusan. jasa fabrikasi mindeng ngawengku laser, motong plasma atawa cai-jet, ngalipet, punching, pangeboran sarta CNC blanks dijieun pikeun gambar.
Quality control covers thickness and flatness, width/length and diagonal tolerance, kualitas permukaan (euweuh goresan, noda, oil or roll marks on critical faces), tensile properties by temper and alloy chemistry on the mill test certificate;
ISO 9001 mills support SGS/BV/TUV inspection. Sheets are normally interleaved with protective film, packed on wooden pallets or in wooden cases with moisture-proof wrapping for export.
Pricing follows the aluminum ingot base plus a processing fee, with thinner or wider gauge, custom cutting, surface treatment and small quantities adding cost; compare suppliers per ton and per finished blank on identical temper, gauge, size and finish, under FOB/CFR/CIF terms (ilaharna 30% deposit with balance against the bill of lading).
Patarosan anu sering ditaroskeun
Q: What is custom 1060 lambaran aluminium dianggo?
A: Tanda sareng tedlatlating, building cladding and roofing, pipe/tank insulation jacketing, Refrectores, Panas, conductive parts, cookware and stamped, spun or deep-drawn components that need formability and corrosion resistance rather than high strength.
Q: What temper should I choose?
A: Use O for deep drawing and spinning, H14/H24 for general sheet and signage, H16/H26 for stiffer panels and H18 for the flattest, most rigid sheet with little forming.
Q: What thicknesses and sizes are available?
A: Common sheet runs 0.2–6 mm in widths up to about 2600 mm, including 4×8 ft and metric standards, with plate and fully custom cut-to-size blanks on request.
Q: How much does a 4×8 sheet weigh?
A: kasarna 8.1 kg at 1 mm, 12.1 kg at 1.5 mm, 16.1 kg at 2 mm jeung 24.2 kg at 3 mm, using kg/m² = thickness (mm) × 2.71 di luhur 2.972 m².
Q: 1060 vs 3003 sheet – which do I need?
A: 1060 for economy, conductivity and corrosion resistance in light-duty work; 3003 when you need about 20% more strength for floors, piring tapak, roofing or tougher formed parts.
Q: Can it be anodized, coated and cut to size?
A: Sumuhun. 1060 anodizes well and can be brushed, mirror-polished, color-coated, embossed and supplied with protective film, plus laser-cut, bent or CNC-fabricated to your drawing.
kacindekan
Adat 1060 aluminum sheet is the economical, easy-to-fabricate pure-aluminum workhorse for signage, cloadds, insulasi, reflectors and formed parts.
Specify the temper from how the panel is processed (O for deep forming, H14/H24 for general and sign use, H18 for rigidity), fix thickness and cut size, choose the surface finish, and buy on mill certificates, dimensional tolerances and approved samples rather than price alone.
