1100 Sotish uchun alyuminiy varaq: Baholar, O'lchamlar va xaridor uchun qo'llanma

Kirish

1100 aluminum sheet is one of the most practical commercially pure aluminum plates you can buy: with a minimum 99.0% aluminum content and a small copper addition, it is slightly stronger than 1050/1060 while keeping excellent formability, korroziyaga qarshilik, weldability and thermal conductivity.

It is the default sheet for chemical equipment, cookware and deep-drawn parts, issiqlik qabul qiluvchilar, signs and general fabrication that do not need high strength.

Offered factory-direct, 1100 sheet can be supplied in standard 4×8 ft and metric sizes or cut to your dimensions, with the temper and surface finish the product needs.

This guide covers the composition, xususiyatlari, sizes and weights, ilovalar, uydirma, bilan qanday taqqoslanadi 1050, 1060 va 3003, and how to order.

Nima 1100 Alyuminiy varaq?

1100 is a non-heat-treatable 1xxx-series alloy strengthened only by cold work and softened by annealing. Sheet generally runs about 0.2–6 mm thick (thicker material is plate), supplied flat or cut to length. Uning xarakterli afzalliklari:

• Bükme uchun ajoyib egiluvchanlik, shtamplash, yigiruv va chuqur chizish, ayniqsa, O temperada.
• Very good atmospheric and chemical corrosion resistance from the self-healing oxide film.
• dan bir oz yuqori quvvat 1050/1060 thanks to a controlled 0.05–0.20% copper addition.
• High thermal and electrical conductivity, plus excellent weldability and easy machining.
• Nur (haqida 2.71 g/sm³), rust-free and lower cost than alloyed grades; anodizes to a good film.
• The trade-off is modest strength; load-bearing or wear parts should use 3003, 5052 yoki 6061.

Kimyoviy tarkibi va mexanik xususiyatlari

Boshqariladigan kimyo (per ASTM B209 / GB / t 3190) keeps silicon plus iron and copper within tight limits so forming, welding and corrosion performance stay high:

Element	Al	Va + Fe	Cu	Mn	Zn
1100	≥99,0	≤0,95	0.05-0,20	≤0.05	≤0.10

 

Mechanical properties change with temper, xuddi shunday 1100 varaq yumshoq va chuqur tortiladigan yoki qattiq va qattiq bo'lishi mumkin (typical Rm values):

Jahl	Kuchlanish (MPa)	Xarakter
O (tavlangan)	taxminan. 75-110	Eng yumshoq; chuqur chizish, yigiruv, maksimal shakllanish qobiliyati
H12 / H22	taxminan. 95–125	Chorak qiyin; yorug'likni shakllantirish
H14 / H24	taxminan. 110-150	Yarim qattiq; common general-purpose temper
H16 / H26	taxminan. 135-170	Uch chorak qiyin; qattiqroq panellar
H18	taxminan. 150-200	To'liq-qattiq; qattiq, cheklangan shakllanish

 

Qalinligi va standarti bo'yicha qiymatlar biroz farq qiladi; confirm tensile and yield on the mill certificate for your gauge.

The small copper addition is what distinguishes 1100 in service.

It gives a modest but useful gain in strength without sacrificing the pure-aluminum forming that lets the sheet be drawn into deep pots and liners, and the metal still anodizes into a uniform, protective film used on trim and nameplates.

1100 thus occupies a deliberate middle ground—not as soft and conductive as 1060, but not as alloyed as 3003, which is why it appears so often in cookware, chemical and general-purpose stock.

Standart o'lchamlar, Yuzaki va og'irligi

1100 varaq taxminan ishlab chiqariladi 0.2 uchun 6 mm (plastinka uchun 200 so'rov bo'yicha mm+), kengligida taxminan 2600 mm va uzunliklar uchun 12,000 mm. Common sizes include 4×8 ft (1219×2438), 1000×2000, 1220×2440, 1250×2500 and 1500×3000, plus custom blanks to drawing.

Yuzaki / tugatish	Oddiy foydalanish
Tegirmonni tugatish (optional PVC/PVDF protective film)	Umumiy varaq, ishlab chiqarish zaxirasi, qoplama
Cho'tkasi / oyna	Dekorativ panellar, oqsoqollar, yoritish
Anodlangan / rangli qoplangan	Chemical and outdoor panels, durable signage, kesish
Naqshli / circles	Izolyatsiya, anti-slip, cookware discs and deep-drawn parts

 

Weight is easy at 2.71 g/sm³: m² uchun kg = qalinligi (mm) × 2.71; a 4×8 ft sheet covers about 2.972 m².

Qalinligi	kg/m²	4×8 varaqning vazni
0.5 mm	1.36	taxminan. 4.0 kg
1.0 mm	2.71	taxminan. 8.1 kg
1.5 mm	4.07	taxminan. 12.1 kg
2.0 mm	5.42	taxminan. 16.1 kg
3.0 mm	8.13	taxminan. 24.2 kg

Odatda arizalar

• Kimyoviy texnologik uskunalar, saqlash tanklari, kemalar, pipes and fittings that need corrosion resistance and weldability.
• Kostryulkalar, cooking utensils and deep-drawn or spun parts, plus aluminum circles for pots and pans.
• Issiqlik cho'kish, chiroq reflektorlari, bottle cap stock, printing plates and food packaging components.
• Belgilar, nameplates and decorative or anodized architectural trim, and general stamped or bent parts.

Fabrication and Surface Treatment

1100 cuts, shears, bends and forms readily and can be laser, plasma or water-jet cut, muhrlangan, spun and drilled; it welds cleanly by common processes and takes anodizing, cho'tkalash, polishing and coating well.

Use O temper for the deepest draws and harder tempers where the finished part must hold shape; generous bend radii and clean, oil-free surfaces help on high-speed lines.

1100 va boshqalar 1050, 1060 va 3003

Baho	Min. Al / qotishma	Kuch	Eng yaxshi mos
1050	99.50% Al	Past	Most economical general sheet and cladding
1060	99.60% Al	Past	Best conductivity/reflectivity; signs and electrical parts
1100	99.00% Al, bir oz Cu	Past-o'rta	Bir oz kuchliroq; shakllantirish, payvandlash, kimyoviy, kostryulkalar
3003	Al + Mn (haqida 1.2%)	O'rta	Haqida 20% kuchli; qavatlar, tread, tougher cladding

 

Tanlang 1100 when you need a little more strength and weldability than 1050/1060 with the same pure-aluminum forming and corrosion; gacha qadam tashlang 3003 for real added strength.

Sifat nazorati, Pricing and How to Order

QC covers thickness and flatness, kenglik / uzunlik va diagonal bardoshlik, surface quality and tensile/yield by temper and chemistry on the MTC; ISO 9001 mills support SGS/BV inspection.

Sheet is interleaved with protective film and packed on pallets or in cases with moisture-proof wrapping for export. Narxlar alyuminiy quyma bazasiga va qayta ishlash to'loviga mos keladi, with thinner/wider gauge, moslashtirilgan kesish, sirtni qayta ishlash va kichik miqdorlar qo'shimcha xarajatlar;

compare per ton and per finished blank on identical specs under FOB/CFR/CIF (odatda 30% depozit, konosamentga nisbatan balans). Iqtibos keltirish uchun, qotishma / temperli yuborish (1100), qalinligi, varaq yoki bo'sh o'lchamlar, sirt, miqdori, ilova va maqsad port.

Verify new material on production-gauge samples rather than photos: run the sheet through your forming, welding or cutting line at normal speed, measure thickness across the width, inspect the surface and, for food or chemical use, confirm the compliance paperwork matches the lot.

A signed pre-production sample then becomes the receiving standard, and an integrated mill that rolls and finishes in-house will hold that standard more reliably across repeat orders than spot resellers.

Tez-tez so'raladigan savollar

Sh: Nima bu 1100 uchun alyuminiy qatlam ishlatiladi?

A: Chemical tanks, vessels and piping, cookware and deep-drawn parts, issiqlik qabul qiluvchilar, belgilar, bottle cap and printing stock, and general fabrication needing formability and corrosion rather than high strength.

Sh: Qanday kuchli 1100 bilan taqqoslaganda 1060 va 3003?

A: It is slightly stronger than 1050/1060 due to a small copper addition, lekin 3003 (marganets) is about 20% kuchli; H18 1100 reaches roughly 150–200 MPa tensile.

Sh: Qanday kayfiyatni tanlashim kerak?

A: O for deep drawing and spinning, H14/H24 for general sheet, H16/H26 for stiffer panels and H18 for the most rigid plate with little forming.

Sh: What sizes and thicknesses are available?

A: About 0.2–6 mm sheet in widths to roughly 2600 mm, 4 × 8 fut va metrik standartlarni o'z ichiga oladi, with plate and cut-to-size blanks on request.

Sh: Can it be welded, anodized and cut to size?

A: Yes—1100 welds cleanly, anodizes and finishes well, and can be laser or sawn cut, bent and supplied as custom blanks with protective film.

Sh: 4×8 varaqning og'irligi qancha?

A: Taxminan 8.1 kg da 1 mm, 12.1 kg da 1.5 mm, 16.1 kg da 2 mm va 24.2 kg da 3 mm, kg/m² = qalinligidan foydalanish (mm) × 2.71 ustida 2.972 m².

Xulosa

1100 aluminum sheet is the slightly stronger, easy-to-fabricate pure-aluminum plate for chemical equipment, kostryulkalar, heat transfer and signs.

Panelning qanday ishlov berilishidan temperni belgilang, qalinligi va kesish hajmini aniqlang, choose the surface, va tegirmon sertifikatlarida sotib oling, tolerances and approved samples rather than price alone.