8079 O Ubushushu 0.0075mm I-Laminated Foil

I. Product Overview

8079 O Ubushushu 0.0075mm I-Laminated Foilyifoyile yealuminiyam ebhityileyo kakhulu eyenzelwe usetyenziso oluchanekileyo. Idibanisa ukusebenza okuphezulu kwe 8079 ialluminiyam enokuthamba okugqithileyo okuphunyezwe nge-O-temper annealing.

II. Inxalenye engundoqo & Uhlalutyo lweNkqubo

2.1 Inxalenye engundoqo: Iimpawu ze 8079 Ingxubevange yeAluminiyam

• Ukwakhiwa kwe-alloy:Yeye-8xxx yothotho lwe-aluminium alloy. Icandelo eliphambili yi-aluminiyam (ibhalansi), equlathe 0.7%-1.3% intsimbi, ≤0.10% i-silicon, kwaye ulandele izixa zobhedu, manganese, izinki, njl. Isici sayo esiphambili yintsimbi ephezulu, ukuqulunqwa kwe-silicon ephantsi [6].
• Iimpawu eziphambili:Ayinatyhefu, engenavumba, ibakala lokhuseleko lokutya. Une-ductility egqwesileyo, ubunzima, kunye neempawu zomqobo. Umphezulu ucocekile kwaye kulula ukulanyisa. Ukumelana namaqondo obushushu aphezulu naphantsi (-60° c ukuya kwi-260 ° C), ifanelekile kwi-ultra-thin rolling kunye ne-lamination processing [6].
• Ukuthelekisa kunye ne-Alloys efanayo (I-E.G., 8011):Inika amandla aphezulu kunye nokuqina, ukusebenza okubalaseleyo komzobo onzulu, kunye nokumelana nokugqobhoza okunamandla. Ilungele iimeko zokuchaneka kwe-lamination ephezulu yemfuno.

2.2 Ubushushu obuphambili: O umsindo (i-Anealed State) Ingcaciso

• Ubushushu Ingcaciso:​ Unyango olufakwe ngokupheleleyo ukuphumeza eyona meko ithambileyo yemathiriyeli, ngeplastiki egqwesileyo, ubude obuphezulu, kunye nokupheliswa koxinzelelo lokuqhuba.
• Impembelelo kwiMveliso:Iqinisekisa ukuqhubekeka komgangatho obhityileyo we-0.0075mm, Ukubonelela ngokugqwesileyo kokusonga kunye nokwenza ubunakho ukuze kulingane iimilo ezintsonkothileyo. Kwakhona kwandisa uzinzo lokuncamathelisa ngexesha lamination kunye nokuthintela interlayer delamination.

2.3 Inkqubo engundoqo: Iinkcukacha zeNkqubo yokuLamination

• Lamination Principle:Ukuhlanganisa 8079 Ifoyile ye-aluminium ye-O-ubushushu (0.0075mm) ngezinto ezisebenzayo ezifana ne-PET, PE, iphepha le-kraft, njl., nge-thermal bonding, ukunamathela, okanye iinkqubo zokuthambisa ezomileyo ezingenazinyibilikisi.
• IiMfuno zeNkqubo ePhambili:Umphezulu wefoyile ye-aluminiyam ufumana unyango lwe-electrostatic degreasing, ngoxinzelelo lomphezulu ≥38 dyn/cm; lawula ubushushu obudibeneyo (120-200°C) kunye noxinzelelo (0.5-2MPa).
• Izinto eziluncedo kwinkqubo:Idibanisa iipropathi zesithintelo sefoyile ye-aluminium kunye nokusebenza kwemathiriyeli edibeneyo, ukwenza i-customized “ifoyile yealuminiyam + umaleko osebenzayo” inkqubo yomqobo.

2.4 Ukutyeba Uphawu: Izinto ezilungileyo ezingundoqo ze-0.0075mm (7.5μm)

• Ukutyeba Ukuma:iwela phakathi kodidi lwefoyile yealuminiyam (4.5-9μm), ukuba nezinto “ujongano olungabonakaliyo” iimpawu.
• Iingenelo ezingundoqo:Ikhaphukhaphu, ukuguquguquka okugqwesileyo, kulula ukusika kunye nokwenza, ngelixa ugcina ukusebenza komqobo ophezulu.

III. Izalathisi zokuSebenza ezingundoqo

3.1 IiPropati zoMzimba eziSisiseko

• Ukutyeba:0.0075mm ± ukunyamezela (inokwenzeka), kunye nokulingana okuphezulu.
• Imbonakalo:Coca, umphezulu othe tyaba, ukhululekile kwioli, imingxunya, kunye nemikrwelo.
• Iipropati zoomatshini:Amandla okuqina 90-110 MPa, i-elongwation 13%-18%, Erichsen ixabiso 6.2-7.3 mm.

3.2 Ukusebenza okungundoqo

• Umqobo wokuSebenza:Umyinge wokuhanjiswa kweoksijini <0.01 g / m² / usuku, umqobo okufutshane-opheleleyo.
• Ukusebenza komsebenzi:Amandla ebhondi ye-interlayer ephezulu, akukho demination.
• Ukumelana nobushushu:Ihlala izinzile kuluhlu olususela ku-73°C ukuya kuma-371°C.
• Ukuqhubekiswa koMsebenzi:Kulula ukusika, punch, kunye netywina lobushushu; iyahambelana nemigca yemveliso enesantya esiphezulu.

3.3 Ukhuseleko kunye nokusebenza kokusingqongileyo

• Ukusebenza koKhuseleko:Ayinatyhefu, engenavumba, ithobela imigangatho yococeko yokutya kunye nokupakishwa kwamayeza.
• Ukusebenza kokusingqongileyo:Ifoyile yealuminiyam iyaphinda isetyenziswe, ukuhlangabezana neemfuno zemveliso eluhlaza kunye nekhabhoni ephantsi.

Iv. Iinkalo zeSicelo

4.1 Ukupakishwa komgangatho ophezulu

• Ukupakishwa kokutya:Ukupakishwa kwevacuum encinci kakhulu, upakisho lwangaphakathi lwe-snack, upakisho olugcina ivumba lokutya okugayiweyo.
• Ukupakishwa kwamayeza:Ukupakishwa kwe-blister ekwifom ebandayo, iipilisi / ukupakishwa kweepilisi.

4.2 Ezombane & Amandla amatsha

• Ukupakishwa kwebhetri yeLithium:I-substrate yangaphakathi yeebhegi zebhetri ze-lithium eziguquguqukayo (ifilimu ye-aluminium-plastiki).
• UKhuseleko lweCandelo loMbane:Umaleko okhuselayo wezinto ezincinci ze-elektroniki kunye neePCB.

4.3 Imimandla yoShishino oluchanekileyo

• Ukupakishwa kwesixhobo esichanekileyo:Ukupakishwa okukhuselekileyo kwezixhobo ezincinci ezichanekileyo kunye neenzwa.
• Ezinye ii-aplikeshini:Isiseko semathiriyeli yeteyiphu ephezulu, I-ultra-thin insulation layer substrate, ilungele iimeko ze-aerospace.

V. IiNkcazo zeMveliso & Iinkonzo ezenzelwe wena

5.1 IiNgcaciso eziMgangatho

(Itheyibhile yenkcazo igciniwe)

5.2 Iinkonzo ezenzelwe wena

• Ubalulo Customization:Ukulungiswa kakuhle kokunyamezela ukutyeba, ukwenziwa ngokwezifiso kobubanzi/ubude.
• Lamination Customization:Yenza ngokwezifiso izixhobo ezidibeneyo kunye neengqimba ezisebenzayo.
• ULungiselelo loNyango lomphezulu:Ukuprintwa komphezulu, unyango ukutyabeka.

VI. Iinzuzo zeMveliso & Ukhuphiswano lweMarike

6.1 Izinto eziluncedo zeMveliso

• Izinto Eziluncedo:Intsimbi ephezulu, i-silicon ephantsi 8079 I-alloy inika ubunzima obuphezulu kunye nokumelana nokugqabhuka.
• Ubushushu Ingenelo:I-O-temper annealing isombulula indawo yentlungu yokwaphuka lula kwifoyile ecwecwe kakhulu.
• Inkqubo Advantage:I-Precision lamination ifezekisa iinjongo ezimbini ze “umsebenzi + ukubhitya.”
• Inkcazo eluncedo:Ubalulo lwe-0.0075mm luzalisa isithuba semarike ye-niche ye-foil enesiphelo esiphezulu esibhityileyo..

6.2 Ukhuphiswano lweMarike

• Niche Dominance:Ijolisa kwi-ultra-thin, imakethi yefoil elaminethiweyo ephezulu echanekileyo.
• Inzuzo Yomgangatho:​ Ulawulo olungqongqo phezu kokulingana kobuninzi kuqinisekisa umgangatho ozinzile.
• Customization Advantage:Uhlengahlengiso lweparameter eguquguqukayo ukuze ihambelane neemeko ezahlukeneyo.

VII. Malunga neHenan Huawei Aluminium Co., Ltd.

7.1 Iprofayile yekhampani

IHenan Huawei Aluminium Industry Co., Ltd. iye yazibandakanya ngokunzulu kwi-aluminium alloy enzulu yokucubungula intsimi iminyaka emininzi, kugxininise kwi-foil ye-aluminium ephezulu kunye nokuveliswa kwemveliso, ngobuchwephesha obunzulu kunye namava kwi-ultra-thin kunye ne-laminated foil.

7.2 Amandla Angundoqo & Isakhono seMveliso

• Ukomelela kweZixhobo:Ixhotyiswe ngemigca yemveliso yasekhaya neyamazwe ngamazwe echanekileyo yokuqengqeleka kwe-ultra-thin kunye ne-lamination.
• Amandla Obugcisa:Ingcali uR&Iqela le-D libambelela ngokungqongqo kwimigangatho yoshishino.
• Ulawulo lwemeko:Inkqubo egcweleyo yokulawula umgangatho eqinisekisa umgangatho wemveliso ozinzile.

7.3 Umda woShishino & UYilo lweMarike

• Iimveliso ezingundoqo:Ibandakanya 8079, 8011, kunye nezinye iifoyile ze-aluminium ze-8-series, nge 8079 I-O-temper ultra-thin laminated foil ibe yimveliso yeflegi.
• Ugutyulo lweMarike:Isekelwe eTshayina, ukusebenza kwihlabathi jikelele, ngomfanekiso oqinileyo webrand.

7.4 Umbutho weNkampani kunye nale Mveliso

Le mveliso yenye yeemveliso eziphambili zeHenan Huawei Aluminium, ukusebenzisa ubuchwephesha obunzulu benkampani kwi 8079 ukusetyenzwa kwe-alloy ukuqinisekisa ukuthotyelwa ngokupheleleyo nemigangatho yokusebenza.

VIII. Ugcino & Ukusetyenziswa koLumkelo

8.1 IiMfuno zokuGcina

• Okusingqongileyo:Gcina kwindawo eyomileyo, ngenisa umoya, indawo epholileyo, ukuphepha ukufuma kunye namaqondo obushushu aphezulu.
• Indlela:Gcina iiroli ngokuthe tye ukunqanda uxinzelelo kunye nefuthe.
• Beka ubomi kwishelufa:​ 12 iinyanga phantsi kweemeko zokugcina ezisemgangathweni.

8.2 Ukusetyenziswa koLumkelo

• Ukuqhubekeka:Lawula amandla ukunqanda ukolula ngaphezulu; ukulawula ubushushu ukutywinwa kobushushu.
• Iimeko zeSicelo:Yiphephe indawo eqinileyo yeasidi/alkali; ukuthobela imigangatho yococeko.

IX. Imibuzo ebuzwa qho

• Q: I-Interlayer delamination iyenzeka.
  • A:Yandisa iiparamitha zokuthambisa kwaye uphucule unyango lomphezulu wesubstrate.
• Q: Imingxunya okanye imikrwelo ibonakala kumphezulu wefoyile.
  • A:Yomeleza ukhuseleko lwemveliso kunye nokuphucula ukuchaneka kwezixhobo.
• Q: I-Foil iphuka ngokulula ngexesha lokucubungula.
  • A:Qinisekisa ukusebenza kwe-O-temper annealing kunye nokulungelelanisa amandla okusebenza.
• Q: Ukusebenza komqobo akukumgangatho ophantsi.
  • A:​ Jonga imfezeko yolwakhiwo lwelamination kunye nokwandisa inkqubo edibeneyo.