Ipuleti leshidi le-aluminium anodized

Yini ishidi le-anodised aluminium

Ngabe uyalazi ipuleti ye-anodised aluminium sheet? I-Anodised Aluminium Plate uhlobo lwe-aluminium olungamelana ne-aluminion futhi olungamelana ne-aluminium evinjelwe ngemuva kokuthi ipuleti ye-aluminium i-oxidized. Ngokusebenzisa i-oxidation engaphezulu, Ifilimu eliminyene le-aluminium oxide lenziwa ngaphezulu kwepuleti le-aluminium, nobukhulu befilimu le-oxide plate maqondana 5 μm-20 μm. Ipuleti le-aluminited aluminised linefilimu elinzima le-anodized liphakeme njenge-50μm-200μm.

Le filimu evikelayo ingathuthukisa ubulukhuni bensimbi futhi igqoke ukumelana nepuleti yangempela ye-aluminium, Futhi ingaphezulu lingamelana nengcindezi ye-200KG-500kg ngesentimitha-skwele. Ngesikhathi esifanayo, Iphoyinti elincibilikayo le-oxide yefilimu ye-aluminium liphakeme ngo-2330K, okuthuthukisa kakhulu umthamo wokushisa wepuleti ye-aluminium.

Features of anodize finish aluminum sheets

1. Anodized aluminum sheet front panel is very glorious of the anodized aluminum sheet which can be make the products more and more beautiful.
2. Anodized aluminum sheet can save so much time and save so many proceeds from the anodized aluminum sheets.
3. After anodized , the products is very clean also antifinger for the aluminum coil.
4. Coloured anodized aluminum sheet can be used for so many industries such as the kitchens, airplanes, constructions, electronic, packings etc
5. After anodized, it will be different kinds surface and different colors for choosing.
6. Different surface for the anodized aluminum sheet, with different usage.

Anodized aluminum veneer production process

The process of anodized aluminum veneer is different from the ordinary painting process. It electrolyzes the conductive acid electrolyte through the electric current to oxidize the aluminum metal surface that constitutes the anode, and naturally grow a thick and dense aluminum oxide protection layer on the aluminum surface. Ifilimu, this oxide film is not an additional layer and will not peel off.

The process of anodized aluminum veneer is different from the ordinary painting process. It electrolyzes the conductive acid electrolyte through the electric current to oxidize the aluminum metal surface that constitutes the anode, and naturally grow a thick and dense aluminum oxide protection layer on the aluminum surface. Ifilimu, this oxide film is not an additional layer and will not peel off. The oxide film is transparent and colorless, and the microcrystalline structure is hexagonal honeycomb. It can not only use the natural color of aluminum to highlight the strong metallic feeling, but also uniformly color the micropores to give the curtain wall brilliant colors, which greatly broadens the application horizon.

Ukwenza: Standard-thickness oxide film (3okukodwa) anodized aluminum veneer does not change color, ukugqwala, oxidation, and rust for long-term indoor use. The anodizes aluminum veneer with thick oxide film (10okukodwa) ingasetshenziswa ngaphandle, futhi kungavezwa ukukhanya kwelanga isikhathi eside ngaphandle kokushintsha umbala wayo.

Amapharamitha we-Anodised Aluminium Sheet

Ama-anodised aluminium sheet alloys	1000 uchungechunge: 1050, 1058, 1060, 1070, 1100 ( A1100 ) njll 3000 uchungechunge: 3003 njll 5000 uchungechunge: 5005, 5050, 5052, 5457, 5754 njll 6000 uchungechunge: 6061, 6063, 6082 njll
Ulaka	H14, H18, H24, H32, T2, T6 njll
Inkambiso ukusika osayizi	Umuvo ( unyawo ): 4×6, 4×8, 6 x 9, 10×8 njll Umuvo ( intshi ): 12×12, 12 x 20, 12×24, 24×48, 48 x 96 njll Okunye usayizi: A3, A4, 1200x2400x3mm njll njll njll
Ubukhulu	Umuvo ( mm ): 0.25mm ( mncane ), 0.3Ishidi le-anodised aluminium, 0.4Ishidi le-anodised aluminium, 0.5mm, 0.6mm, 1mm, 1.2mm, 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 8mm ( obukhulu ) njll Umuvo ( intshi ): 1/8, 0.04″ njll
Umbala	Umbala owenziwe ngokwezifiso: -cwebile ( -yimvelo ), mnyama, isiliva , igolide elikhanyayo, isibani esikhanyayo, -bomvu, -mpunga, eluhlaza okwesibhakabhaka, ithusi, -nombala wegolide, I-Bronze emnyama njll
Ukwelashwa kwendawo	I-Anodize Reflectory Mirror Delive ( 85% ubuthano ), matte anodised, i-pursid edilizwe i-anodised, U-Anodized onzima, I-Stucco efakwe ukuthungwa njll

Uhlobo lwe-Anodised Aluminium Sheet

uhlangothi olulodwa noma izinhlangothi zombili

I-Anodised Aluminium isho ungqimba lwe-aluminium oximane ehlanganisiwe ebusweni be-aluminium ne-aluminium alloys. Ukuze uvikele ezinye i-oxidation, Izakhiwo zayo zamakhemikhali zifana ne-aluminium oxide. Kepha ngokungafani namafilimu ajwayelekile we-oxide, I-Anodised Aluminium ingadaywa ngombala we-electrolytic.

Isimiso sokulungiselela i-aluminium anodised ngumphumela we-anode oxidized (owaziwa nangokuthi anodizing).

Ngabe ipuleti ye-aluminium ioxidized kanjani?

Umphumela we-anodised yinto ehlukile ye-electrolysis ka-molten, futhi ukusebenza kwe-electrolytic aluminium ukukhiqizwa kusabonakala. Lapho umphumela we-anodised wenzeka ekukhiqizweni, Amandla kagesi we-electrolytic cell akhuphuka kakhulu, Ukufinyelela i-20-50V, kwesinye isikhathi kuphakeme kakhulu. Ukwenza kwayo kunomthelela omkhulu kulo lonke uchungechunge lwe-electrolses, Ukunciphisa ukusebenza kahle kwamanje, okuthinta izinkomba zobuchwepheshe ze-electrolysis, kanye nokunciphisa umphumela nekhwalithi ye-aluminium, kanye nokubhubhisa amandla abushelelezi ochungechunge lwe-electrollysis. Ngokuya ngezindlela zokucubungula, lutho kodwa

Kunezinhlobo ezimbili: Kusetshenziswa induku yomphumela (induku yokhuni) ukucisha, noma wehlise i-anodised, futhi wandise inani le-alumina ukufeza inhloso yokucisha umphumela we-anodised. Akukho ukwelashwa okungcono okutholakele.

Umphumela we-anodised wenzeka ngoba ama-oksijini aqukethe i-oksijini ku-electrolyte kancane incipha ngenqubekela phambili yenqubo ye-electrolysis. Lapho ifinyelela ezingeni elithile, Kuzoba nemvula ye-fluorine futhi uhlanganyele nekhabhoni eno-anodised ukukhiqiza i-carbon fluoride. Lapho i-fluoride yekhabhoni ibola futhi, Inembe izinhlayiya ezinhle zekhabhoni, okunamathiselwe ebusweni be-anodised, vikela i-electrolyte ekuxhumaneni ne-anodised, yenza i-electrolyte ingamanzi kahle i-anodized kahle, Njengamanzi angenakumanzisa indawo enobuthakathaka, ukuze i-electrolyte-anode ifomu ngefilimu legesi ngokuvuselelwa okungekuhle, Ukwanda kwe-anodised ngokweqile, kubangela umphumela we-anode. Lapho kufakwa i-alumina entsha, i-oksijini inembe ku-anodised, Futhi i-oksijini ibhekana ne-carbon powder, kancane kancane wenza indawo yokungena ngaphakathi, Ukumelana kuyancipha, futhi inqubo ye-electrolys ivame ukwejwayelekile.

Ukuhlelwa Kwezinqubo Zokukhiqiza I-Anodised Aluminium Sheet

1. I-Mechan Polishing;

2. Ukwelashwa ngamakhemikhali kususa ingxenye yethusi ebusweni be-alloys ethile;

3. Ukuhlanza nokuhlanza (izingxenye ze-anodised, Uma ukuphinda i-anophization iyadingeka, Isendlalelo sobuso sokuqala se-anodised anodised sisuswa nge-alkali noma i-ejenti ekhethekile)

4. Uyibeke nge-dilite sulfuric acid njenge-anode yokwenza ugesi ukukhiqiza ungqimba lwe-oxide olungaphezulu (Kuyi-porous futhi ifilimu emhlophe ye-translucent);

5. Ukudada;

6. Bethela (Shisisa noma uvale ama-pores of the warce oxide ungqimba ngesisombululo se-chromate).

Izicelo zamashidi we-anodised aluminium flat

Amashidi e-aluminium e-aluminium ezakhiwo zokubhala, Iphaneli ye-Industrial Lanemia, Amapuleti welayisense angenalutho, I-tag yokuphrinta, Amapuleti wegama, amagugu, I-UV Silk Phrinta, Amapuleti Esithombe, I-PhotoPrint, I-motor negamaplate, Ishidi le-Anodin Anodinud Aluminium labaphrinta we-3D, amaphaneli ahlanganisiwe we-aluminium ( Ikalibhodi ), into engekho, Ukuqoshwa kwe-laser, -Vulwe, Izingxenye zemishini ye-CNC, ukufulela, Ilebula yokumaka ye-laser njll

• Ukwenza umbala we-alumining aluminium panels
• I-Anodised Aluminium Flashing
• Ukwahlulwa kwezimboni ze-anodised aluminium sheet izikhala
• I-Laser Cutting Anodised Aluminium Sheet yeSolar CPC
• Ishidi elihlanganisiwe le-anodined aluminium
• Ishidi le-Anodised Aluminium Plaque lokuqopha ( Amapuleti angenalutho aqoshiwe )
• Ishidi le-aluminium langaphambi kokuhlobisa ( Ukuhlobisa Udonga, Craft njll )
• Umbala we-anodising anodising ilayisense yelayisense ye-aluminium
• Ipuleti le-aluminium magazine elinqunyiwe
• Ukunyathela ingxenye ye-CNC yemishini ye-Anodised Aluminium Plate Fasteners
• Imikhiqizo ye-Anodised Aluminium ( ipuleti lesidlo sakusihlwa, ibhodlela, nqenqetha, into ebiyelayo, Isigaxa Washer, I-Metal Box, Faka ilebula Plate, Inani lenombolo, Ipuleti lobuso, ipuleti yokuma ikhibhodi, Ikhadi Lebhizinisi, bopha ngekilampu, uphawu lomgwaqo, Isiginali Somgwaqo njll )
• Isikulufa se-anodised plated selfitect self
• I-Anodised Aluminium Plate Laser Etching
• I-Marine grade Anodised aluminium aluminium anweuts
• Iphaneli ye-Anodized Self Adhesive Aluminium
• Ishidi le-anodised punched aluminium lemoto
• Ishidi le-anodinum eluhlaza anodinud anodinum chaint
• Amashidi aphrinta anodinum anodinum
• Ukunemba kwensimbi ye-CNC Sheet Alumining Anodizing
• Ipuleti kagesi ye-Anodised Aluminium
• Ipuleti ye-anodised aluminium switch wall
• Iphrofayili ye-Anodised Plate Aluminium

Imikhiqizo eshisayo ye-Anodised Aluminium

• Ishidi lokungavinjelwe le-aluminium anodised
• Amashidi we-anodinum anodinum anodinud anodinud
• I-Anodised Aluminium Plaque Plate 86x54x0.8mm
• Isibonisi Esikhulu Sokucatshangelwa ( 98% ) Amashidi we-anodised aluminium

I-Anodised Aluminium Sheet Paking

I-Standrad ithenge i-pallet yokhuni enokhuni ene

1. Ukuvikelwa kwamafilimu epulasitiki.
2. Iphepha eliqinile le-Kraft.
3. I-Steel Bar Bunch.
4. Ipuleti lokhuni.